Spectral Reflectance Characteristics of the Soils on Basaltic Terrain of Central Indian Plateau

In-situ spectral reflectance characteristics of soils were studied under field conditions with Multiband Ground Truth Radiometer covering 0.45?C0.52, 0.52?C0.59, 0.62?C0.68, and 0.77?C0.86 ??m spectral bands. Twenty-two surface soil samples were studied in laboratory for their spectral reflectance characteristics using ISCO Model S.R. Spectroradiometer in visible wavelength (450?C725 nm), with 25 nm bandwidth, and in infrared wavelength (750?C1550 nm), with 50 nm bandwidth. The Bidirectional reflectance factor representative of spectral reflectance varied from 3.78 to 11.3???m in band 1, 6.09 to 15.41???m in band 2, 8.05 to 19.41???m in band 3, and 12.18 to 31.2???m in band 4. In-situ spectral reflectance in general increases with the wavelength from visible to infrared bands for all the soils. Black soils have relatively lower reflectance as compared to red soils, which is attributed to the variation in the physicochemical properties of soils. Spectral reflectance, under laboratory conditions, for all the soils increases with wavelength from visible to infrared region except at 950 nm and 1200 nm, where reflectance decreased in all soils, due to weaker water absorption bands and also at 1350 nm, due to strong water absorption at this band. The spectral reflectance of red soils were higher, in-situ as well as under laboratory conditions, as compared to black soils, which is attributed to variation in soil colour, organic matter and clay content of soils. It is observed that the spectral reflectance decrease due to moisture content in soils in all the spectral bands because of darker appearance of soils at moist conditions. Laboratory reflectance measurements serve to define the extent to which intrinsic spectral information is available from soils as a consequence of their composition.     

A study on the combination of satellite, airborne, and terrestrial gravity data

Satellite gravity missions, such as CHAMP, GRACE and GOCE, and airborne gravity campaigns in areas without ground gravity will enhance the present knowledge of the Earths gravity field. Combining the new gravity information with the existing marine and ground gravity anomalies is a major task for which the mathematical tools have to be developed. In one way or another they will be based on the spectral information available for gravity data and noise. The integration of the additional gravity information from satellite and airborne campaigns with existing data has not been studied in sufficient detail and a number of open questions remain. A strategy for the combination of satellite, airborne and ground measurements is presented. It is based on ideas independently introduced by Sjöberg and Wenzel in the early 1980s and has been modified by using a quasi-deterministic approach for the determination of the weighting functions. In addition, the original approach of Sjöberg and Wenzel is extended to more than two measurement types, combining the Meissl scheme with the least-squares spectral combination. Satellite (or geopotential) harmonics, ground gravity anomalies and airborne gravity disturbances are used as measurement types, but other combinations are possible. Different error characteristics and measurement-type combinations and their impact on the final solution are studied. Using simulated data, the results show a geoid accuracy in the centimeter range for a local test area.     

Evaluation of pre-CHAMP gravity models `GRIM5-S1' and `GRIM5-C1' with satellite crossover altimetry

 The new GFZ/GRGS gravity field models GRIM5-S1 and GRIM5-C1, currently used as initial models for the CHAMP mission, have been compared with other recent models (JGM 3, EGM 96) for radial orbit accuracy (by means of latitude lumped coefficients) in computations on altimetry satellite orbits. The bases for accuracy judgements are multi-year averages of crossover sea height differences from Geosat and ERS 1/2 missions. This radially sensitive data is fully independent of the data used to develop these gravity models. There is good agreement between the observed differences in all of the world's oceans and projections of the same errors from the scaled covariance matrix of their harmonic geopotential coefficients. It was found that the tentative scale factor of five for the formal standard deviations of the harmonic coefficients of the new GRIM fields is justified, i.e. the accuracy estimates, provided together with the GRIM geopotential coefficients, are realistic. Received: 20 February 2001 / Accepted: 24 October 2001     

Conjoint modeling of residential group preferences: A comparison of the internal validity of hierarchical information integration approaches

 In this paper, two approaches for measuring residential group preferences, based on the method of Hierarchical Information Integration (HII), are compared. In particular, the hypothesis that group-based preference models estimated from integrated HII experiments better predict group preferences than part individual-based group models estimated from classical HII experiments is tested. To that effect, the models' ability to predict group preferences for new residential alternatives is compared in a study of residential preferences of co-ops. Results indicate that integrated HII group experiments indeed result in better predictions of residential preferences.     

Geostatistical incorporation of spatial coordinates into supervised classification of hyperspectral data

 This paper presents a methodology to incorporate both hyperspectral properties and spatial coordinates of pixels in maximum likelihood classification. Indicator kriging of ground data is used to estimate, for each pixel, the prior probabilities of occurrence of classes which are then combined with spectral-based probabilities within a Bayesian framework. In the case study (mapping of in-stream habitats), accounting for spatial coordinates increases the overall producer's accuracy from 85.8% to 93.8%, while the Kappa statistic rises from 0.74 to 0.88. Best results are obtained using only indicator kriging-based probabilities, with a stunning overall accuracy of 97.2%. Significant improvements are observed for environmentally important units, such as pools (Kappa: 0.17 to 0.74) and eddy drop zones (Kappa: 0.65 to 0.87). The lack of benefit of using hyperspectral information in the present study can be explained by the dense network of ground observations and the high spatial continuity of field classification which might be spurious. Received: 12 April 2001 / Accepted: 7 September 2001     

GPS network monitors the Western Alps' deformation over a five-year period: 1993–1998

  The Western Alps are among the best studied collisional belts with both detailed structural mapping and also crustal geophysical investigations such as the ECORS and EGT seismic profile. By contrast, the present-day kinematics of the belt is still largely unknown due to small relative motions and the insufficient accuracy of the triangulation data. As a consequence, several tectonic problems still remain to be solved, such as the amount of N–S convergence in the Occidental Alps, the repartition of the deformation between the Alpine tectonic units, and the relation between deformation and rotation across the Alpine arc. In order to address these problems, the GPS ALPES group, made up of French, Swiss and Italian research organizations, has achieved the first large-scale GPS surveys of the Western Alps. More than 60 sites were surveyed in 1993 and 1998 with a minimum observation of 3 days at each site. GPS data processing has been done by three independent teams using different software. The different solutions have horizontal repeatabilities (N–E) of 4–7 mm in 1993 and 2–3 mm in 1998 and compare at the 3–5-mm level in position and 2-mm/yr level in velocity. A comparison of 1993 and 1998 coordinates shows that residual velocities of the GPS marks are generally smaller than 2 mm/yr, precluding a detailed tectonic interpretation of the differential motions. However, these data seem to suggest that the N–S compression of the Western Alps is quite mild (less than 2 mm/yr) compared to the global convergence between the African and Eurasian plate (6 mm/yr). This implies that the shortening must be accomodated elsewhere by the deformation of the Maghrebids and/or by rotations of Mediterranean microplates. Also, E–W velocity components analysis supports the idea that E–W extension exists, as already suggested by recent structural and seismotectonic data interpretation. Received: 27 November 2000 / Accepted: 17 September 2001     

Reducing the draconitic errors in GNSS geodetic products

Systematic errors at harmonics of the GPS draconitic year have been found in diverse GPS-derived geodetic products like the geocenter $Z$ -component, station coordinates, $Y$ -pole rate and orbits (i.e. orbit overlaps). The GPS draconitic year is the repeat period of the GPS constellation w.r.t. the Sun which is about 351 days. Different error sources have been proposed which could generate these spurious signals at the draconitic harmonics. In this study, we focus on one of these error sources, namely the radiation pressure orbit modeling deficiencies. For this purpose, three GPS+GLONASS solutions of 8 years (2004–2011) were computed which differ only in the solar radiation pressure (SRP) and satellite attitude models. The models employed in the solutions are: (1) the CODE (5-parameter) radiation pressure model widely used within the International GNSS Service community, (2) the adjustable box-wing model for SRP impacting GPS (and GLONASS) satellites, and (3) the adjustable box-wing model upgraded to use non-nominal yaw attitude, specially for satellites in eclipse seasons. When comparing the first solution with the third one we achieved the following in the GNSS geodetic products. Orbits: the draconitic errors in the orbit overlaps are reduced for the GPS satellites in all the harmonics on average 46, 38 and 57 % for the radial, along-track and cross-track components, while for GLONASS satellites they are mainly reduced in the cross-track component by 39 %. Geocenter $Z$ -component: all the odd draconitic harmonics found when the CODE model is used show a very important reduction (almost disappearing with a 92 % average reduction) with the new radiation pressure models. Earth orientation parameters: the draconitic errors are reduced for the $X$ -pole rate and especially for the $Y$ -pole rate by 24 and 50 % respectively. Station coordinates: all the draconitic harmonics (except the 2nd harmonic in the North component) are reduced in the North, East and Height components, with average reductions of 41, 39 and 35 % respectively. This shows, that part of the draconitic errors currently found in GNSS geodetic products are definitely induced by the CODE radiation pressure orbit modeling deficiencies.     

The effects of frequency-dependent quasar variability on the celestial reference frame

We examine the relationship between source position stability and astrophysical properties of radio-loud quasars making up the International Celestial Reference Frame (ICRF2). Understanding this relationship is important for improving quasar selection and analysis strategies, and therefore reference frame stability. We construct flux density time series, known as light curves, for 95 of the most frequently observed ICRF2 quasars at both the 2.3 and 8.4 GHz geodetic very long baseline interferometry (VLBI) observing bands. Because the appearance of new quasar components corresponds to an increase in quasar flux density, these light curves alert us about potential changes in source structure before they appear in VLBI images. We test how source position stability depends on three astrophysical parameters: (1) flux density variability at X band; (2) time lag between flares in S and X bands; (3) spectral index root-mean-square (rms), defined as the variability in the ratio between S and X band flux densities. We find that the time lag between S and X band light curves provides a good indicator of position stability: sources with time lags $<$ 0.06 years are significantly more stable ( $>$ 20 % improvement in weighted rms) than sources with larger time lags. A similar improvement is obtained by observing sources with low $(<$ 0.12) spectral index variability. On the other hand, there is no strong dependence of source position stability on flux density variability in a single frequency band. These findings can be understood by interpreting the time lag between S and X band light curves as a measure of the size of the source structure. Monitoring of source flux density at multiple frequencies therefore appears to provide a useful probe of quasar structure on scales important to geodesy. The observed astrometric position of the brightest quasar component (the core) is known to depend on observing frequency. We show how multi-frequency flux density monitoring may allow the dependence on frequency of the relative core positions along the jet to be elucidated. Knowledge of the position–frequency relation has important implications for current and future geodetic VLBI programs, as well as the alignment between the radio and optical celestial reference frames.