Paleomagnetism of early Aphebian diabase dykes from the slave structural province, Canada

Early Aphebian dykes (lowermost Proterozoic) intrude the Archean terrain of the Slave Structural Province of the Canadian Shield and paleomagnetic results from them are reported. The Dogrib dykes, with an Rb/Sr age of 2692 ± 80 mm.y., have directions of magnetization directed toward the NW without reversals (16 sites; 309, + 37; α₉₅ = 4°; pole 35S, 050W). The Indin dykes, with an Rb/Sr age of 2093 ± 86 mm.y., have magnetization directed toward the SE with reversals (13 sites; 131, + 58; α₉₅ = 8°; pole 19N, 076W). Other, less well-documented data from a third dyke swarm (the “X” dykes) and a basic sill (the Duck Lake Sill), are also presented, and a very tentative polar path for the Slave Province in the earlier Proterozoic is given. This path is not greatly different from a similar very tentative early Aphebian polar path from the Archean Superior Province, considering the uncertainties in the paleomagnetic and age determinations. We interpret this to mean either that the intervening Hudsonian Structural Province (−1850 m.y.) was not the site of a wide plate-style opening and closing ocean, or if it was, the two bounding Archean cratons returned approximately to their original relative position.     

Variability in bedform morphology and kinematics with transport stage

Bedform geometry is widely recognized to be a function of transport stage. Bedform aspect ratio (height/length) increases with transport stage, reaches a maximum, then decreases as bedforms washout to a plane bed. Bedform migration rates are also linked to bedform geometry, in so far as smaller bedforms in coarser sediment tend to migrate faster than larger bedforms in finer sediment. However, how bedform morphology (height, length and shape) and kinematics (translation and deformation) change with transport stage and suspension have not been examined. A series of experiments is presented where initial flow depth and grain size were held constant and the transport stage was varied to produce bedload dominated, mixed‐load dominated and suspended‐load dominated conditions. The results show that the commonly observed pattern in bedform aspect ratio occurs because bedform height increases then decreases with transport stage, against a continuously increasing bedform length. Bedform size variability increased with transport stage, leading to less uniform bedform fields at higher transport stage. Total translation‐related and deformation‐related sediment fluxes all increased with transport stage. However, the relative contribution to the total flux changed. At the bedload dominated stage, translation‐related and deformation‐related flux contributed equally to the total flux. As the transport stage increased, the fraction of the total load contributed by translation increased and the fraction contributed by deformation declined because the bedforms got bigger and moved faster. At the suspended‐load dominated transport stage, the deformation flux increased and the translation flux decreased as a fraction of the total load, approaching one and zero, respectively, as bedforms washed out to a plane bed.     

The visualization of turbulence data using a wavelet‐based method

This technical communication presents some MATLAB^® routines for visualizing the structure in turbulent signals based on a standard conditional averaging and thresholding approach. Up to three velocity components may be analysed and the resulting output highlights the time at which important flow events occur as well as the frequency levels that contribute the greatest energy to this particular event. The latter information is derived from a wavelet decomposition of the signal and may assist in providing a process‐based explanation of observed flow features. Copyright © 2006 John Wiley & Sons, Ltd.     

A preliminary climatology of ground‐based inversions in Canada

Precipitation efficiency is the percentage of the total water vapor over an area that falls to the surface as measurable precipitation on an average day. This variable focuses attention on the dynamic mechanisms that produce different precipitation patterns in different areas. The concept of precipitation efficiency is discussed and its seasonal and annual values are mapped for several Canadian stations. Maximum seasonal values occur in winter for all of the country. National highs are found on the West Coast and along the St. Lawrence Lowland, a result of the cyclonic activity in these regions.     

The Hadley circulation: assessing NCEP/NCAR reanalysis and sparse in-situ estimates

 We present a comparison of the zonal mean meridional circulations derived from monthly in situ data (i.e. radiosondes and ship reports) and from the NCEP/NCAR reanalysis product. To facilitate the interpretation of the results, a third estimate of the mean meridional circulation is produced by subsampling the reanalysis at the locations where radiosonde and surface ship data are available for the in situ calculation. This third estimate, known as the subsampled estimate, is compared to the complete reanalysis estimate to assess biases in conventional, in situ estimates of the Hadley circulation associated with the sparseness of the data sources (i.e., radiosonde network). The subsampled estimate is also compared to the in situ estimate to assess the biases introduced into the reanalysis product by the numerical model, initialization process and/or indirect data sources such as satellite retrievals. The comparisons suggest that a number of qualitative differences between the in situ and reanalysis estimates are mainly associated with the sparse sampling and simplified interpolation schemes associated with in situ estimates. These differences include: (1) a southern Hadley cell that consistently extends up to 200 hPa in the reanalysis, whereas the bulk of the circulation for the in situ and subsampled estimates tends to be confined to the lower half of the troposphere, (2) more well-defined and consistent poleward limits of the Hadley cells in the reanalysis compared to the in-situ and subsampled estimates, and (3) considerably less variability in magnitude and latitudinal extent of the Ferrel cells and southern polar cell exhibited in the reanalysis estimate compared to the in situ and subsampled estimates. Quantitative comparison shows that the subsampled estimate, relative to the reanalysis estimate, produces a stronger northern Hadley cell (∼20%), a weaker southern Hadley cell (∼20–60%), and weaker Ferrel cells in both hemispheres. These differences stem from poorly measured oceanic regions which necessitate significant interpolation over broad regions. Moreover, they help to pinpoint specific shortcomings in the present and previous in situ estimates of the Hadley circulation. Comparisons between the subsampled and in situ estimates suggest that the subsampled estimate produces a slightly stronger Hadley circulation in both hemispheres, with the relative differences in some seasons as large as 20–30%. 6These differences suggest that the mean meridional circulation associated with the NCEP/NCAR reanalysis is more energetic than observations suggest. Examination of ENSO-related changes to the Hadley circulation suggest that the in situ and subsampled estimates significantly overestimate the effects of ENSO on the Hadley circulation due to the reliance on sparsely distributed data. While all three estimates capture the large-scale region of low-level equatorial convergence near the dateline that occurs during El Nino, the in situ and subsampled estimates fail to effectively reproduce the large-scale areas of equatorial mass divergence to the west and east of this convergence area, leading to an overestimate of the effects of ENSO on the zonal mean circulation. Received: 16 September 1998 / Accepted: 22 April 1999     

Soils and stratigraphy of the laddie creek site (48BH345), an altithermal-age occupation in the big horn mountains,wyoming

Haploborolls and Ustifluvents with A-C horizonation characterize Holocene soil development in alluvium and colluvium of the Laddie Creek valley. Cumulic soils with overthickened A horizons, including those of Altithermal age, have formed along the valley walls under the influence of spring activity from the Amsden Formation (Mississippian-Pennsylvanian). Soil texture, mineralogy, and to some extent color, are inherited largely from sediment derived from the Amsden and Tensleep (Pennsylvanian) Formations. The valley was able to support human occupation during Altithermal time (ca. 7500-4000 B.P.) because of springs emanating from the valley walls. Past spring locations are identified from soil morphology and stratigraphy. Springs are still active along the valley, although they have shifted positions many times in the past. The association of spring soils with Altithermal-age occupation at the site (ca. 6600-5700 B.P.) does not coincide with the caliche concept of the Altithermal paleosol in Holocene alluvial valleys in Wyoming basins as identified by Leopold and Miller. Nevertheless, early man of Altithermal time probably sought higher elevations within mountains of the region where springs offered water and the environs provided food and shelter—thus enabling human groups to survive the drought, and possible high temperatures, which seemingly prevailed in the basins and plains.     

La representation du potentiel terrestre par masses ponctuelles

Résumé Un modèle de représentation du potential terrestre par 126 masses ponctuelles de profondeurs situées entre 1000 et 1500 km a été construit à partir de la Standard Earth II du S.A.O. et utilisé avec succès pour la représentation du géo?de, des anomalies de gravité, ainsi qu’en calcul d’orbites par correction différentielle utilisant des observations réelles de satellites artificiels. Les propriétés de décroissance rapide de ces fonctions sont mises en évidence, et leur utilisation envisagée à l’analyse scientifique de mesures altimétriques.     

Digital Image Based Approach for Three-Dimensional Mechanical Analysis of Heterogeneous Rocks

Summary This paper presents a digital image based approach for three-dimensional (3-D) numerical simulation and failure analysis of rocks by taking into account the actual 3-D heterogeneity. Digital image techniques are adopted to extract two-dimensional (2-D) material heterogeneity from material surface images. The 2-D image mesostructures are further extrapolated to 3-D cuboid mesostructures by assuming the material surface as a representation of the inner material heterogeneity within a very small depth. The iterative milling and scanning system is set up to generate the 3-D rock mesostructures. A Hong Kong granite specimen is used as an example to demonstrate the procedure of 3-D mesostructure establishment. The mechanical responses and failure process under the conventional Brazilian tensile test condition are examined through numerical analyses. The stress distribution, crack propagation process and failure model of heterogeneous material cases are simulated with a finite difference software. The numerical results indicate that material heterogeneity plays an important role in determining the failure behavior of rocks under external loading.