A mathematical model of concentrate solids content for the wet drum magnetic separator

Low concentrate density from wet drum magnetic separators in dense medium circuits can cause operating difficulties due to inability to obtain the required circulating medium density and, indirectly, high medium solids losses. The literature is almost silent on the processes controlling concentrate density. However, the common name for the region through which concentrate is discharged—the squeeze pan gap—implies that some extrusion process is thought to be at work. There is no model of magnetics recovery in a wet drum magnetic separator, which includes as inputs all significant machine and operating variables.A series of trials, in both factorial experiments and in single variable experiments, was done using a purpose built rig which featured a small industrial scale (700 mm lip length, 900 mm diameter) wet drum magnetic separator. A substantial data set of 191 trials was generated in this work. The results of the factorial experiments were used to identify the variables having a significant effect on magnetics recovery.It is proposed, based both on the experimental observations of the present work and on observations reported in the literature, that the process controlling magnetic separator concentrate density is one of drainage. Such a process should be able to be defined by an initial moisture, a drainage rate and a drainage time, the latter being defined by the volumetric flowrate and the volume within the drainage zone. The magnetics can be characterised by an experimentally derived ultimate drainage moisture. A model based on these concepts and containing adjustable parameters was developed. This model was then fitted to a randomly chosen 80% of the data, and validated by application to the remaining 20%. The model is shown to be a good fit to data over concentrate solids content values from 40% solids to 80% solids and for both magnetite and ferrosilicon feeds.     

Isotopic constraints on growth conditions of multiphase calcite–pyrite–barite concretions in Carboniferous mudstones

Carbonate concretions in the Lower Carboniferous Caton Shale Formation contain diagenetic pyrite, calcite and barite in the concretion matrix or in different generations of septarian fissures. Pyrite was formed by sulphate reduction throughout the sediment before concretionary growth, then continued to form mainly in the concretion centres. The septarian calcites show a continuous isotopic trend from δ¹³C=?28·7‰ PDB and δ¹⁸O=?1·6‰ PDB through to δ¹³C=?6·9‰ PDB and δ¹⁸O=?14·6‰ PDB. This trend arises from (1) a carbonate source initially from sulphate reduction, to which was added increasing contributions of methanogenic carbonate; and (2) burial/temperature effects or the addition of isotopically light oxygen from meteoric water. The concretionary matrix carbonates must have at least partially predated the earliest septarian cements, and thus used the same carbonate sources. Consequently, their isotopic composition (δ¹³C=?12·0 to ?10·1‰ PDB and δ¹⁸O=?5·7 to ?5·6‰ PDB) can only result from mixing a carbonate cement derived from sulphate reduction with cements containing increasing proportions of carbonate from methanogenesis and, directly or indirectly, also from skeletal carbonate. Concretionary growth was therefore pervasive, with cements being added progressively throughout the concretion body during growth. The concretions contain barite in the concretion matrix and in septarian fissures. Barite in the earlier matrix phase has an isotopic composition (δ³⁴S=+24·8‰ CDT and δ¹⁸O=+16·4‰ SMOW), indicating formation from near‐surface, sulphate‐depleted porewaters. Barites in the later septarian phase have unusual isotopic compositions (δ³⁴S=+6 to +11‰ CDT and δ¹⁸O=+8 to +11‰ SMOW), which require the late addition of isotopically light sulphate to the porewaters, either from anoxic sulphide oxidation (using ferric iron) or from sulphate dissolved in meteoric water. Carbon isotope and biomarker data indicate that oil trapped within septarian fissures was derived from the maturation of kerogen in the enclosing sediments.     

Cenozoic tectonic events at the border of the Paraná Basin, São Paulo, Brazil

In the last decade, even in areas that had been considered tectonically stable, a great amount of Cenozoic, including the Quaternary period, structural data have been collected throughout Brazil. The main goal of this study is to describe the Cenozoic structures and tectonic evolution of an area that is located at the border of the Paraná Basin in the state of São Paulo.The research methods consisted of the analysis of: (1) brittle structure data, mainly conjugate fractures and fault slip data; (2) lineaments traced on air photos and TM Landsat and radar images; and (3) a second-order base surface map.The study area, during the Cenozoic, has been affected by five strike–slip tectonic events, which generated mainly strike–slip faults, and secondarily normal and reverse ones. The events were named, from the oldest to the youngest, E1-NE, E2-EW, E3-NW, E4-NS, and E5-NNE; and the maximum principal stresses σ1 strike approximately NE–SW, E–W, NW–SE, N–S, and NNE–SSW, respectively. Event E2-EW seems to have been contemporaneous with the deposition of the Rio Claro Formation, the most important Cenozoic deposit of probable Neogenic age, and also to have controlled the distribution of its deposits. Event E3-NW was the strongest one in the area, as is pointed out by structural data, and the maximum principal stress σ1 of event E5-NNE is partially concordant with the orientation of σH-max of well break-out data in the Paraná Basin, suggesting a Neotectonic activity for this event. Finally, discontinuities parallel and correlated to the directions of strike–slip faults of the Cenozoic events seem to have actively controlled the sculpturing of the relief in the study area.     

Interaction of the Atmosphere and Lithosphere in the Minute Range of Periods

Doklady Earth Sciences - The interaction between the atmosphere and the lithosphere in the minute range of periods is considered. The technique of assessment of the influence of atmospheric...     

Olivine in ultramafic lamprophyres: chemistry,crystallisation, and melt sources of Siberian Pre- and post-trap aillikites

We studied olivines from the Devonian pre-trap (the Ilbokich occurrence) and the Triassic post-trap (the Chadobets occurrence) carbonate-rich ultramafic lamprophyres (UMLs) in the southwestern portion of the Siberian craton. On the basis of detailed investigations of major, minor, and trace-element distributions, we have reconstructed the main processes that control the origins of these olivines. These include fractional crystallisation from melt, assimilation, and fractional crystallisation processes with orthopyroxene assimilation, melt-reaction diffusive re-equilibration, alkali enrichment, and CO₂ degassing of the melt. Furthermore, we inferred the composition of the sources of the primary UML melt and their possible correlations with proto-kimberlitic melts, as well as the influence of the Triassic Siberian plume on the composition of the lithospheric mantle. The main differences between olivines from the Ilbokich and the Chadobets aillikites were that the olivines from the former had more magnesium-rich cores (Mg# = 89.2?±?0.2), had Mg- and Cr-rich transition zones (Mg# = 89.7?±?0.2 and 300–500 ppm Cr), had lower Ni (up to 3100 ppm) and Li (1.4–1.5 ppm), and had higher B (0.8–2.6 ppm) contents, all at higher Fo values (90–86), relative to the olivines from the latter (Mg# = 88–75; 200–300 ppm Cr; up to 3400 ppm Ni; 1.4–2.4 ppm Li; 0.4–2.2 ppm B). The Siberian aillikite sources contained a significant amount of metasomatic material. Phlogopite-rich MARID-type veins provided the likely metasomatic component in the pre-trap Devonian Ilbokich aillikite source, whereas the Triassic Chadobets aillikitic post-trap melts were derived from a source with a significant carbonate component. A comparison of UML olivines with olivines from the pre-trap and post-trap Siberian kimberlites shows a striking similarity. This suggests that the carbonate component in the aillikitic source could have been produced by evolved kimberlite melts. The differences in the lithospheric metasomatic component that contributed to pre-trap and post-trap aillikitic melts can be interpreted as reflections of the thermal impact of the Siberian Traps, which reduced phlogopite-bearing metasomes within the southwestern Siberian sub-continental lithospheric mantle.     

Anaerobic digested sludge: a new supplementary nutrient source for ethanol production

Effluent sludge from an anaerobic digester was used as a source of nitrogen, phosphate, sulfur, and other nutrients in the culture medium of ethanol production by the yeast Saccharomyces cerevisiae. Several pretreatments (mechanical, chemical, thermal, and thermo-chemical) were performed on the anaerobic digested sludge (ADS) to make the nutrients accessible to the yeast cells. Preliminary experiments revealed that S. cerevisiae is not able to assimilate the carbon content of the ADS. However, when glucose was added to the medium, ethanol production was observed. The yield of ethanol using untreated ADS was only 10 % of the theoretical yield, but alkaline pretreatment improved it up to 43 %. By separating the hydrolysate of alkaline-treated ADS from the suspended solids, the ethanol yield from the supernatant was further improved up to 65 % of theoretical yield. Alkaline-treated ADS exhibited competitive performance with the mixture of yeast extract and mineral salts in ethanol fermentation.     

The population of faint transients in the Galactic Centre

BeppoSAX has detected a population of faint transient X-ray sources in the Galactic Centre. I show that a simple irradiated disc picture gives a consistent fit to the properties of this population, and that it probably consists of low-mass X-ray binaries (LMXBs) that have evolved beyond their minimum orbital periods of ∼80 min. Since all post-minimum systems are transient, and neutron star LMXBs are more common than black hole LMXBs in the Galaxy, the majority of these systems should contain neutron stars, as observed. This picture predicts that the Galactic Centre transients should have orbital periods in the range ∼80–120 min, and that most of them should repeat in the next few years. In this case, the total number of post-minimum transients in the Galaxy would be considerably smaller than the usual estimates of its total LMXB population. I discuss possible reasons for this.     

Observations of longitudinal roll vortices during arctic cold air outbreaks over open water

An evolving convective Arctic planetary boundary layer (PBL) containing longitudinal roll vortices (rolls) was observed with aircraft data during the 1983 Marginal Ice Zone Experiment and the 1984 Arctic Cyclone Experiment.The PBL is observed to grow rapidly as the very cold and dry air flows off the ice over the relatively warm water. There is very large sensible heat flux, a result of the large surface-air temperature differences. Coherent structures were identified in these PBL's by use of power, coherence squared and phase spectra of the data. A systematic method of separating the rolls from organized thermal plumes was devised, based on theoretical characteristics for roll circulations and the resulting modified mean wind profile. The rapid mixing by the rolls aids in the establishment of equilibrium and an observed adiabatic modified mean Ekman layer. Rolls that form in a thermally neutral atmosphere over ice have different characteristics than those that appear in the unstable stratification over water. The rolls become increasingly more convective in character with distance from the ice edge. They have aspect ratios (wavelength/PBL height) that decrease with distance from the ice edge in agreement with linear theory. This is in contrast to the cloud street wavelength to inversion height ratio which is observed to increase downwind from the ice edge.     

Stable Atmospheric Boundary-Layer Experiment in Spain (SABLES 98): A Report

This paper describes the Stable AtmosphericBoundary Layer Experiment in Spain (SABLES 98),which took place over the northern Spanish plateaucomprising relatively flat grassland,in September 1998. The main objectives of the campaign were to study the properties of themid-latitude stable boundary layer (SBL).Instrumentation deployed on two meteorologicalmasts (of heights 10 m and 100 m)included five sonic anemometers, 15 thermocouples,five cup anemometers and three propeller anemometers,humidity sensors and radiometers.A Sensitron mini-sodar and a tetheredballoon were also operated continuously. Atriangular array of cup anemometers wasinstalled to allow the detection ofwave events. Two nocturnal periods analysedon 14–15 and 20–21 September are used toillustrate the wide-ranging characteristics of the SBL.