Hydrothermal manganese mineralization in the Peterbourgskoye ore field (North Atlantic)

The manganese crust covered by pelagic sediment was recovered from the 3 km depth from the Peterbourgskoye ore field located on the eastern flank of the Mid-Atlantic Ridge. The crust comprises a platy brittle aggregate 1–5 cm thick made of black heterogeneous and partly porous material. The inner structure consists of aggregated parallel microplaits several micrometers to 0.2 mm thick consisting of well-crystallized bisnessite with a minor admixture of colloform vernadite. The chemical composition of the crust is dominated by manganese (more than 60% MnO) with minor iron (1.7% Fe₂O₃) and somewhat notable sodium and sulfur. The trace element composition is characterized by very high molybdenum, moderate gallium and uranium, and very low values of 40 other trace elements. Compared to previous publications, the composition of this crust is fairly different from the average values previously defined for hydrothermal crusts. On the other hand, it is rather close to some crusts recovered from subsea volcanoes in the Sea of Japan.     

Influence of North Atlantic Oscillation on Moscow Climate Continentality

Izvestiya, Atmospheric and Oceanic Physics - The natural variability of regional climatic conditions poses certain difficulties in detecting global climate change at a local scale. The question...     

Interaction of internal waves with a horizontally inhomogeneous density field area overlying a ridge

In the context of the general linear theory, we consider the propagation of an internal tide across a frontal zone overyling an oceanic ridge. For a uniformly stratified ocean, the solution was derived using Riemann's technique. The dependences of the generated internal wave amplitudes on the stratification parameters and bottom topography were determined. We have found that wave disturbances of high intensity inside and in the neighbourhood of the ridge may be concentrated in raytype areas. An increase of the horizontal density gradient in the frontal zone results in a perceptible deformation of these areas.Translated by Vladimir A. Puchkin.     

Leachable particulate iron in the Columbia River,estuary, and near-field plume

This study examines the distribution of leachable particulate iron (Fe) in the Columbia River, estuary, and near-field plume. Surface samples were collected during late spring and summer of 2004–2006 as part of four River Influence on Shelf Ecosystems (RISE) cruises. Tidal amplitude and river flow are the primary factors influencing the estuary leachable particulate Fe concentrations, with greater values during high flow and/or spring tides. Near the mouth of the estuary, leachable particulate Fe [defined as the particulate Fe solubilized with a 25% acetic acid (pH 2) leach containing a weak reducing agent to reduce Fe oxyhydroxides and a short heating step to access intracellular Fe] averaged 770 nM during either spring tide or high flow, compared to 320 nM during neap tide, low flow conditions. In the near-field Columbia River plume, elevated leachable particulate Fe concentrations occur during spring tides and/or higher river flow, with resuspended shelf sediment as an additional source to the plume during periods of coastal upwelling and spring tides. Near-field plume concentrations of leachable particulate Fe (at a salinity of 20) averaged 660 nM during either spring tide or high flow, compared to 300 nM during neap tide, low flow conditions. Regardless of tidal amplitude and river flow, leachable particulate Fe concentrations in both the river/estuary and near-field plume are consistently one to two orders of magnitude greater than dissolved Fe concentrations. The Columbia River is an important source of reactive Fe to the productive coastal waters off Oregon and Washington, and leachable particulate Fe is available for solubilization following biological drawdown of the dissolved phase. Elevated leachable Fe concentrations allow coastal waters influenced by the Columbia River plume to remain Fe-replete and support phytoplankton production during the spring and summer seasons.     

Atmospheric temperature sounding with the Fourier spectrometer

Preliminary results of a space experiment using the IKFS-2 infrared sounder (Meteor-M2 satellite) showed high-quality of measurements of spectra of the outgoing thermal radiation of the atmosphere–surface system and the adequacy of developed IR radiation atmospheric models in the 15-μm carbon gas absorption band used to recover the vertical profiles of the atmospheric temperature. Outgoing radiation spectra measured by IKFS-2 instruments make it possible to restore vertical temperature profiles with errors close to 1K in most of the 0–30 km high-altitude region, except for the lower troposphere and altitudes above 30 km, where these errors are close to 2–3K.     

Estimation of physical efficiency of hail protection accounting for changes in hail climatology

Results are considered of study of climate global warming effects on hail climatology and on technique of estimation of physical efficiency of hail protection taking account of the region hail danger trend. It is found that during last 30 years, occurrence frequency of hail and the number of heavy hailstorms in the mountainous areas of the Northern Caucasus decreased, on average, by a factor of 1.5–2, and in the foothill areas increased by 15–20%. It is shown that efficiency of hail protection works should be estimated taking into account the hail danger trend for each region.     

An Intercomparison of Large-Eddy Simulations of the Stable Boundary Layer

Results are presented from the first intercomparison of large-eddy simulation (LES) models for the stable boundary layer (SBL), as part of the Global Energy and Water Cycle Experiment Atmospheric Boundary Layer Study initiative. A moderately stable case is used, based on Arctic observations. All models produce successful simulations, in as much as they generate resolved turbulence and reflect many of the results from local scaling theory and observations. Simulations performed at 1-m and 2-m resolution show only small changes in the mean profiles compared to coarser resolutions. Also, sensitivity to subgrid models for individual models highlights their importance in SBL simulation at moderate resolution (6.25 m). Stability functions are derived from the LES using typical mixing lengths used in numerical weather prediction (NWP) and climate models. The functions have smaller values than those used in NWP. There is also support for the use of K-profile similarity in parametrizations. Thus, the results provide improved understanding and motivate future developments of the parametrization of the SBL.     

Generalized flux law,with an application

A generalized flux law, which can specialize into power‐ and diffusive‐type flux laws, is proposed. When coupled with the continuity equation, a generalized flow equation is the result. The generalized equation specializes into several cases, one of which is the kinematic wave equation. By applying the generalized flow equation and its variants to flow routing in two rivers, the usefulness of the generalized flux law is evaluated. Copyright © 1999 John Wiley & Sons, Ltd.     

评估空间—发生率—震级地震预测的基于似然的检验

区域地震似然模型(RELM)工作组的5年实验是设计用来比较预测加州及附近各纬度-经度-震级单元地震发生率的若干有希望的方法。这种预测模式被作为世界范围内其他地震可预测性试验的蓝本,因此考虑如何评估这种预测的性能是很重要的。最近采用的两个试验都基于给定预测情况下观测到的地震分布的概率,一个测试比较了空间-发生率-震级单元的观测值和预测值,另一个测试仅仅比较了预测的发生率和观测地震的数目。在本文中,我们讨论了目前关于发生率预测的微小的缺陷,我们建议采用另外两个测试分别进行空间-发生率-震级预测的空间和震级分量的预测。为了更好地说明问题,我们考虑了区域地震似然模型预测和进行区域地震似然模型实验的前半期观测到的地震分布。我们得出空间—发生率—震级预测好像是和观测地震的分布相一致,尽管空间预测和观测地震的空间分布是不一致的,我们建议这些新的测试应该被用于提供更详细的地震预测评估。我们也讨论了每个基于似然测试的统计学功效以及基于似然测试的结果的稳定性(相对于地震目录的不确定性)。     

A probabilistic performance‐based approach for mitigating the seismic pounding risk between adjacent buildings

Existing design procedures for determining the separation distance between adjacent buildings subjected to seismic pounding risk are based on approximations of the buildings' peak relative displacement. These procedures are characterized by unknown safety levels and thus are not suitable for use within a performance‐based earthquake engineering framework. This paper introduces an innovative reliability‐based methodology for the design of the separation distance between adjacent buildings. The proposed methodology, which is naturally integrated into modern performance‐based design procedures, provides the value of the separation distance corresponding to a target probability of pounding during the design life of the buildings. It recasts the inverse reliability problem of the determination of the design separation distance as a zero‐finding problem and involves the use of analytical techniques in order to evaluate the statistics of the dynamic response of the buildings. Both uncertainty in the seismic intensity and record‐to‐record variability are taken into account. The proposed methodology is applied to several different buildings modeled as linear elastic single‐degree‐of‐freedom (SDOF) and multi‐degree‐of‐freedom (MDOF) systems, as well as SDOF nonlinear hysteretic systems. The design separation distances obtained are compared with the corresponding estimates that are based on several response combination rules suggested in the seismic design codes and in the literature. In contrast to current seismic code design procedures, the newly proposed methodology provides consistent safety levels for different building properties and different seismic hazard conditions. Copyright © 2012 John Wiley & Sons, Ltd.