Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

Shoreline variability via empirical orthogonal function analysis: Part I temporal and spatial characteristics

Empirical orthogonal functions (EOFs) or principal components were used to extract the significant modes of shoreline variability from several data sets collected at three very different locations. Although EOFs have proven to be a valuable tool in the analysis of nearshore data, most applications have focused on the ability of the technique to describe cross-shore or profile variability. Here however, EOFs were used to help identify the dominant modes of longshore shoreline variability at Duck, North Carolina, the Gold Coast, Australia, and at several locations within the Columbia River Littoral Cell in the U.S. Pacific Northwest. In part one of this analysis, characteristic patterns of shoreline variability identified by the EOF analysis are described in detail. At each site, the dominant modes consisting of the first four eigenfunctions were found to describe nearly 95% of the total shoreline variability. At both Duck and the Gold Coast, several interesting longshore periodic features suggestive of sand waves were identified, while boundary effects related to natural headlands and navigational structures/entrances dominated the Pacific Northwest data sets.     

Caught in the act: the 20 December 2001 gravity flow event in Monterey Canyon

A sediment gravity flow descended through the axis of Monterey Canyon on 20 December 2001 at 13:35 Pacific standard time. The timing of this event is documented by a current-meter package which recorded an 11.9-dbar pressure increase in less than 10 min and was found 550 m down-canyon from its deployment site, buried completely within a >70-cm-thick gravity flow deposit. This event is believed to have started in less than 290 m of water because an instrument at this location was also lost at the same time. A 178-cm core collected after the event from the axis of the canyon at 1,297-m water depth contained fresh, greenish, chlorophyll-rich organic material at 32-cm sub-bottom depth, suggesting the event extended to this water depth. The only trigger identified for this mass movement event appears to be moderate sea and surf conditions. Thus, gravity flow events of this magnitude do not require an exceptional triggering event.     

Caught in the act: the 20 December 2001 gravity flow event in Monterey Canyon

A sediment gravity flow descended through the axis of Monterey Canyon on 20 December 2001 at 13:35 Pacific standard time. The timing of this event is documented by a current-meter package which recorded an 11.9-dbar pressure increase in less than 10 min and was found 550 m down-canyon from its deployment site, buried completely within a >70-cm-thick gravity flow deposit. This event is believed to have started in less than 290 m of water because an instrument at this location was also lost at the same time. A 178-cm core collected after the event from the axis of the canyon at 1,297-m water depth contained fresh, greenish, chlorophyll-rich organic material at 32-cm sub-bottom depth, suggesting the event extended to this water depth. The only trigger identified for this mass movement event appears to be moderate sea and surf conditions. Thus, gravity flow events of this magnitude do not require an exceptional triggering event.     

Reflection of large-scale inhomogeneities in the air-sea boundary layer on the intensity of surface wave breaking in the ocean

An overview of experiments is given on the observation of the dependence of the intensity of wind wave breaking on large-scale currents' inhomogeneities and atmospheric boundary layer stratification. The data were interpreted using a model in which the variance of the wind wave breaking intensity reflects fluctuations in the influx of energy to wind waves due to various factors. Translated by V. Puchkin.     

Physico-chemical and mineralogical studies on cochin marine clays

Large deposits of marine clays are encountered all along the Indian coastal belt. These clays are pleistocene to recent in origin, are considered to be young, and were deposited in a salt or brackish environment. These clays are very soft in consistency with low in-situ strength and high compressibility. The properties of these soil deposits depend mainly on the clay minerals present. In the present investigation, the mineralogical studies of some Cochin marine clays were carried out using XRD technique. The physical and chemical properties of these deposits were also reported. The test results were compared with some earlier reported works on marine clays.     

The effects of vehicular and pedestrian traffic on dune vegetation in South Africa

The effects of varying intensities of off-road vehicle and pedestrian traffic on vegetation height and percent-cover were investigated at two sites representing pioneer and climax dune shrubland communities in South African dune systems. In all cases, a decreasing trend in vegetation height and percentage cover subsequent to application of the treatments was evident, although this was more clear in the shrub than in the pioneer community. The impact on vegetation variables increased with increasing intensity of vehicle and pedestrian treatments. Vehicles driven along a curved path resulted in greater vegetation destruction than those driven along a straight path. High intensity (single application) treatments resulted in an initial decrease in vegetation height and cover immediately after the impact, which was followed by a further decline over the next 3 months. This two-step response was attributed to the subsequent gradual death of the vegetation which was not evident immediately following the impact. Due to their faster growth rate, pioneer dune communities appear to have the capacity to recover following impacts, while dune shrub communities tend to be more vulnerable, exhibiting signs of damage for longer periods. The results of this study have value for managers of coastal dune systems, particularly those impacted by human recreational activities.