山东牟平邓格庄金矿的地球化学特征及成因

邓格庄大型石英脉型金矿，分布于燕山期昆嵛山花岗岩体内金牛山断裂带次级断裂中。成矿年龄１１８×１０６ａ，它比容矿岩体冷凝至３５０℃时还晚１２×１０６ａ。成矿深度小于１ｋｍ（约０．７５ｋｍ），而容矿岩体的定位深度大于１３ｋｍ，它们的定位深度差大于１２ｋｍ。成矿流体来自地壳深部，通过水－岩反应又从容矿岩体中萃取一部分金。故此金矿不是传统意义的岩浆期后热液矿床     

土的边界面本构模型研究进展

简述了土的边界面本构模型国内外研究状况，阐述了其基本思想。对边界面模型作了简要评述，提出了边界面模型研究的发展趋向。     

构造层次与大陆壳动力学机制转变关系

针对构造层次研究现状和存在的问题，把大陆壳划分为深部，中部，浅部和浅－表部四个构造层次。依据各自所处特定的构造位置、组成构造岩类型、形成的制约因素和地质时代等方面的区别，各构造层次分别是壳－幔间滑动，大陆张裂、隆－滑构造和变质核杂岩构造等多种大陆壳动力学机制转变过程中的产物。构造层次与大陆壳动力学机制转变关系的确定，更有利于古老板构造连续性、整体性的研究以及多期、多层次、多旋回大陆地壳演化模式的建     

广州珠江西航道,流溪河有机污染特征与感潮作用

珠江西航道和流溪河在广州市区上游，为广州市主要水源区。由于感潮作用，受市区严重污染的水体因涨潮上溯而上游传输。严重影响上游水质。因此，弄清感潮作用对广州水源区水质的影响程度和范围，对水源保护与利用有重要意义。本研究从下游到上游，对水源区底泥中有机物特征进行了分析，结果表明：（１）从上游到上游，受感潮作用影响逐渐减小，污染程度逐渐减轻；（２）水源区有机物特征呈有规律变化。从靠近城市的下游到远离城市的     

伊通地堑下第三系原油和生油岩中芳构化五环三萜及其地球化学意义

详细研究了吉林伊通地堑下第三系生油岩和原油中的芳烃生物标志物，包括常规的多环芳烃，以及丰富的来源于高等植物的芳香二萜和芳构化的五环三萜。目前，原油中芳构化五环三萜类生物类生物标志物国内外均尚报道极少。还详细讨论了利用原油中最新发现的芳构化五环三萜在解决本区生物输入，油源对比以及石油成因等方面的重要意义。     

毛洋头铀（银,钼）矿床同位素地球化学研究

毛洋头铀矿床的（Ｈ、Ｏ）同位素特征表明：早期矿化热液主要为岩浆水，而晚期矿化热液则主要为大气降水。铅同位素组成反映该矿床中铅为不同来源的混合铅。Ｃ、Ｓ同位素组成变化范围小，且与火成岩的Ｃ、Ｓ同位素组成相当，说明矿床中的碳和硫主要淋取于火成围岩或源于地壳深部。     

临沧超大型锗矿床有机质与锗矿化的地球化学特征

临沧锗矿床是一产于第三系含煤岩系中的超大型矿床。矿床的最初锗源与盆地西缘的二云母花岗岩有关。主矿体产于下煤组沉积旋回的早期地层中，每一沉积阶段早期形成的褐煤和碳质泥岩中富含锗，最高含量达１４７０×１０＾－６。褐煤和碳质泥岩在矿化过程中平均富集了１６４－１６９倍。根据锗含量，褐煤和碳质泥岩可分为锗含量小于１２×１０＾－６的低锗煤（泥岩）和大于９０×１０＾－６的高锗煤（泥岩）。高锗煤中有机质富含氧官能     

义马新安煤矿特大型奥灰突水的治理

采用“上阻、中栏、下堵”的立体堵水方法，封堵了义马新安煤矿1995年11月5日发生的特大型（4257m3／h）奥灰突水通道，解放被淹矿井，堵水效果良好。     

Relocation of the October 9, 1505 Earthquake with M63/4

There have been 12 possible locations of the earthquakes occurring in the South Yellow Sea since 1505.In this paper,the location of the earthquake that occurred in 1505 has been determined by the collection of more historical data of the influenced field,referring the isoseismal data of earthquakes with the epicentral intensityⅨ and combining geophysical field data with tectonic condition,due to its great influence on seismic safety assessment of some significant engineering.     

Attenuation differences in layer 2A in intermediate- and slow-spreading oceanic crust

In situ seismic attenuationQ⁻¹logs are derived from borehole velocity profiles and reveal sharp boundaries between morphologies of the extrusive volcanic layers in intermediate- and slow-spreading oceanic crust.Q⁻¹logs are calculated from the scattering attenuation associated with vertical velocity heterogeneity in Ocean Drilling Program Holes 504B and 896A and in Hole 395A, located in 5.9–7.3 Ma crust on the Pacific and Atlantic plates, respectively. Our results strongly tie crustal properties to seismic measurables and observed geological structures: we find that the scattering attenuation can be used to identify the extrusive volcanic sequence because it is closely related to changes in the degree of vertical heterogeneity. We interpret a distinct decrease in the Q⁻¹log at the transition below the extrusive volcanic layer to correspond with the seismic layer 2A/2B boundary. The boundary is located at 465 m depth below the sea floor in both Hole 395A and 504B, although this is likely to be a coincidence of the sediment thickness at these sites. Layer 2A is estimated to be approximately 150 m thick in Hole 504B and > 300 m thick in Hole 395A. Cyclic sequences of high-porosity pillows and low-porosity massive units in the uppermost 100 m of volcanics in Hole 395A result in large velocity heterogeneities which cause > 5 times more attenuation in this layer than in Hole 504B. In Hole 896A, by contrast, fewer pillows, more massive flows, and a greater volume of carbonate veins decrease the velocity heterogeneity and attenuation significantly over only 1 km distance from Hole 504B. We conclude that the attenuation in the extrusive volcanics of the ocean crust is largely controlled by variation in local heterogeneity and morphology as well as by subsequent hydrothermal alteration. The observed differences inQ⁻¹profiles and layer 2A thickness at these sites may be attributed to variations in the volume and duration of volcanic activity at mid-ocean spreading centers for these Pacific and Atlantic ridge segments.