On the source of the slowly varying component at centimeter and millimeter wavelenghts

The general features of the slowly varying component at centimeter and millimeter wavelengths are explained by magneto-ionic thermal emission. A model of an active region is constructed in which the electron temperature and density profile is based on recent EUV measurements, and the current-free magnetic field configuration is derived from a longitudinal magnetogram and scalar potential theory. In the model, the contributions of the reflected component of the inward extraordinary wave is important in determining the characteristic features of the radio flux and polarization. Emission by the mechanism of resonance absorption does not appear to be a significant factor in this model.     

Lunar structure and dynamics - results from the apollo passive seismic experiment

Analysis of seismic signals from man-made impacts, moonquakes, and meteoroid impacts has established the presence of a lunar crust, approximately 60 km thick in the region of the Apollo seismic network; an underlying zone of nearly constant seismic velocity extending to a depth of about 1000 km, referred to as the mantle; and a lunar core, beginning at a depth of about 1000 km, in which shear waves are highly attenuated suggesting the presence of appreciable melting. Seismic velocitites in the crust reach 7 km s^–1 beneath the lower-velocity surface zone. This velocity corresponds to that expected for the gabbroic anorthosites found to predominate in the highlands, suggesting that rock of this composition is the major constituent of the lunar crust. The upper mantle velocity of about 8 km s^–1 for compressional waves corresponds to those of terrestrial olivines, pyroxenites and peridotites. The deep zone of melting may simply represent the depth at which solidus temperatures are exceeded in the lower mantle. If a silicate interior is assumed, as seems most plausible, minimum temperatures of between 1450°C and 1600°C at a depth of 1000 km are implied. The generation of deep moonquakes, which appear to be concentrated in a zone between 600 km and 1000 km deep, may now be explained as a consequence of the presence of fluids which facilitate dislocation. The preliminary estimate of meteoroid flux, based upon the statistics of seismic signals recorded from lunar impacts, is between one and three orders of magnitude lower than previous estimates from Earth-based measurements.Paper dedicated to Professor Harold C. Urey on the occasion of his 80th birthday on 29 April, 1973.     

DEVEX-disdrometer evaluation experiment: Basic results and implications for hydrologic studies

Increasing our understanding of the small scale variability of drop size distributions (DSD), and therefore of several bulk characteristics of rainfall processes, has major implications for our interpretation of the remote sensing based estimates of precipitation and its uncertainty. During the spring and summer of 2002 the authors conducted the DEVEX experiment (disdrometer evaluation experiment) to compare measurements of natural rain made with three different types of disdrometers collocated at the Iowa City Municipal Airport in Iowa City, Iowa in the Midwestern United States. This paper focuses on the evaluation of the instruments rather than analysis of the hydrometeorological aspects of the observed events. The comparison demonstrates discrepancies between instruments. The authors discuss the systematic and random effects in terms of rainfall quantities, drop size distribution properties, and the observed drop size vs. velocity relationships. Since the instruments were collocated, the effects of the natural variability of rain are reduced some with time integration, isolating the instrumental differences. The authors discuss the status of DSD measurement technologies and the implications for a range of hydrologic applications from remote sensing of rainfall to atmospheric deposition to soil erosion and sediment transport in the environment. The data set collected during the DEVEX experiment is made available to the research community.     

Constant normal-moveout (CNMO) correction: a technique and test results

We introduce a processing technique which minimizes the 'stretching effects' of conventional NMO correction. Unlike conventional NMO, the technique implies constant normal moveout (CNMO) for a finite time interval of a seismic trace. The benefits of the proposed method include preservation of higher frequencies and reduction of spectral distortions at far offsets. The need for severe muting after the correction is reduced, allowing longer spreads for stack, velocity and AVO analysis. The proposed technique has been tested on model and real data. The method may improve the resolution of CMP stack and AVO attribute analysis. The only assumptions for this stretch-free NMO correction are (i) all time samples of a digital reflected wavelet at a particular offset have the same normal moveout, and (ii) reflection records have an interference nature.     

Faulting, fracturing and in situ stress prediction in the Ahnet Basin, Algeria — a finite element approach

Many low-efficiency hydrocarbon reservoirs are productive largely because effective reservoir permeability is controlled by faults and natural fractures. Accurate and low-cost information on basic fault and fracture properties, orientation in particular, is critical in reducing well costs and increasing well recoveries. This paper describes how we used an advanced numerical modelling technique, the finite element method (FEM), to compute site-specific in situ stresses and rock deformation and to predict fracture attributes as a function of material properties, structural position and tectonic stress. Presented are the numerical results of two-dimensional, plane-strain end-member FEM models of a hydrocarbon-bearing fault-propagation-fold structure. Interpretation of the modelling results remains qualitative because of the intrinsic limitations of numerical modelling; however, it still allows comparisons with (the little available) geological and geophysical data.

In all models, the weak mechanical strength and flow properties of a thick shale layer (the main seal) leads to a decoupling of the structural deformation of the shallower sediments from the underlying sediments and basement, and results in flexural slip across the shale layer. All models predict rock fracturing to initiate at the surface and to expand with depth under increasing horizontal tectonic compression. The stress regime for the formation of new fractures changes from compressional to shear with depth. If pre-existing fractures exist, only (sub)horizontal fractures are predicted to open, thus defining the principal orientation of effective reservoir permeability. In models that do not include a blind thrust fault in the basement, flexural amplification of the initial fold structure generates additional fracturing in the crest of the anticline controlled by the material properties of the rocks. The folding-induced fracturing expands laterally along the stratigraphic boundaries under enhanced tectonic loading. Models incorporating a blind thrust fault correctly predict the formation of secondary syn- and anti-thetic mesoscale faults in the basement and sediments of the hanging wall. Some of these faults cut reservoir and/or seal layers, and thus may influence effective reservoir permeability and affect seal integrity. The predicted faults divide the sediments across the anticline in several compartments with different stress levels and different rock failure (and proximity to failure). These numerical model outcomes can assist classic interpretation of seismic and well bore data in search of fractured and overpressured hydrocarbon reservoirs.     

The effect of extracellular polymers (EPS) on the proton adsorption characteristics of the thermophile Bacillus licheniformis S-86

This study investigated proton adsorption to an extracellular polymeric substance (EPS) producing bacterial strain, Bacillus licheniformis S-86, in order to characterise and quantify the contribution made by EPS to cell surface reactivity. Potentiometric titrations were conducted using both untreated cells and cells from which the EPS layer had been extracted. Surface-complexation modelling indicated the presence of four different functional groups in both untreated and EPS-free cells. These sites are assigned to phosphodiester, (pK_a 3.3–3.4), carboxylic (pK_a 5.3–5.4), phosphoryl/ (pK_a 7.4–7.5) and hydroxyl/amine (pK_a 9.9–10.1) type groups. The pK_a values for the four groups were very similar for untreated and EPS-free cells, indicating no qualitative difference in composition, but site concentrations in the untreated cells were statistically found to be significantly higher than those in the EPS-free cells for the pK_a 3.3–3.4 and pK_a 9.9–10.1 sites. Infrared analysis provided supporting evidence that site 2 is carboxylic in nature but did not reveal any difference in IR absorption between the native and EPS-free cells. Dissolved organic carbon (DOC) analysis conducted during this study indicated that DOC release by cells is significant, and that the EPS layer is the major contributor.     

A Corrected and Generalized Successive Random Additions Algorithm for Simulating Fractional Levy Motions

Simulation of subsurface heterogeneity is important for modeling subsurface flow and transport processes. Previous studies have indicated that subsurface property variations can often be characterized by fractional Brownian motion (fBm) or (truncated) fractional Levy motion (fLm). Because Levy-stable distributions have many novel and often unfamiliar properties, studies on generating fLm distributions are rare in the literature. In this study, we generalize a relatively simple and computationally efficient successive random additions (SRA) algorithm, originally developed for generating Gaussian fractals, to simulate fLm distributions. We also propose an additional important step in response to continued observations that the traditional SRA algorithm often generates fractal distributions having poor scaling and correlation properties. Finally, the generalized and modified SRA algorithm is validated through numerical tests.     

Nutrient Inputs, Phytoplankton Response, and CO2 Variations in a Semi-Enclosed Subtropical Embayment, Kaneohe Bay, Hawaii

The marine shelf areas in subtropical and tropical regions represent only 35% of the total shelf areas globally, but receive a disproportionately large amount of water (65%) and sediment (58%) discharges that enter such environments. Small rivers and/or streams that drain the mountainous areas in these climatic zones deliver the majority of the sediment and nutrient inputs to these narrow shelf environments; such inputs often occur as discrete, episodic introductions associated with storm events. To gain insight into the linked biogeochemical behavior of subtropical/tropical mountainous watershed-coastal ocean ecosystems, this work describes the use of a buoy system to monitor autonomously water quality responses to land-derived nutrient inputs and physical forcing associated with local storm events in the coastal ocean of southern Kaneohe Bay, Oahu, Hawaii, USA. The data represent 2.5 years of near-real time observations at a fixed station, collected concurrently with spatially distributed synoptic sampling over larger sections of Kaneohe Bay. Storm events cause most of the fluvial nutrient, particulate, and dissolved organic carbon inputs to Kaneohe Bay. Nutrient loadings from direct rainfall and/or terrestrial runoff produce an immediate increase in the N:P ratio of bay waters up to values of 48 and drive phytoplankton biomass growth. Rapid uptake of such nutrient subsidies by phytoplankton causes rapid declines of N levels, return to N-limited conditions, and subsequent decline of phytoplankton biomass over timescales ranging from a few days to several weeks, depending on conditions and proximity to the sources of runoff. The enhanced productivity may promote the drawing down of pCO₂ and lowering of surface water column carbonate saturation states, and in some events, a temporary shift from N to P limitation. The productivity-driven CO₂ drawdown may temporarily lead to air-to-sea transfer of atmospheric CO₂ in a system that is on an annual basis a source of CO₂ to the atmosphere due to calcification and perhaps heterotrophy. Storms may also strongly affect proximal coastal zone pCO₂ and hence carbonate saturation state due to river runoff flushing out high pCO₂ soil and ground waters. Mixing of the CO₂-charged water with seawater causes a salting out effect that releases CO₂ to the atmosphere. Many subtropical and tropical systems throughout the Pacific region are similar to Kaneohe Bay, and our work provides an important indication of the variability and range of CO₂ dynamics that are likely to exist elsewhere. Such variability must be taken into account in any analysis of the direction and magnitude of the air?Csea CO₂ exchange for the integrated coastal ocean, proximal and distal. It cannot be overemphasized that this research illustrates several examples of how high frequency sampling by a moored autonomous system can provide details about ecosystem responses to stochastic atmospheric forcing that are commonly missed by traditional synoptic observational approaches. Finally, the work exemplifies the utility of combining synoptic sampling and real-time autonomous observations to elucidate the biogeochemical and physical responses of coastal subtropical/tropical coral reef ecosystems to climatic perturbations.