Controls on the chemistry of runoff from an upland peat catchment

This study uses 2 years of data from a detailed weekly water sampling programme in a 11·4 km² upland peat catchment in the Northern Pennines, UK. The sampling comprised precipitation, soil‐water samples and a number of streams, including the basin outlet. Samples were analysed for: pH, conductivity, alkalinity, Na, K, Ca, Mg, Fe, Al, Total N, SO₄, Cl and colour. Principal component analysis (PCA) was used to identify end‐members and compositional trends in order to identify controls on the development of water composition. The study showed that the direct use of PCA had several advantages over the use of end‐member mixing analysis (EMMA) as it combines an analysis of mixing and evolving waters without the assumption of having to know the compositional sources of the water. In its application to an upland peat catchment, the study supports the view that shallow throughflow at the catotelm/acrotelm boundary is responsible for storm runoff generation and shows that baseflow is controlled by cation exchange in the catotelm and mixing with a base‐rich groundwater. Copyright © 2003 John Wiley & Sons, Ltd.     

The impact of wave loads and pore-water pressure generation on initiation of sediment transport

The build-up of pore-water pressure by waves can lead to sediment liquefaction and subsequent transport by traction currents. This process was investigated by measuring pore-water pressures both in a field experiment and laboratory wave tank tests. Liquefaction was observed in the wave tank tests. The results suggest that sand is less susceptible than silts to wave-induced liquefaction because of the tendency to partially dissipate pore-water pressures. However, previous studies have determined that pore-water pressures must approach liquefaction before current velocities necessary to initiate transport are reduced. Once liquefaction has occurred more sediment can be transported.     

Generation of complete theoretical seismograms for SH—

Summary. We report the initial results of our attempts to obtain theoretical seismograms for direct comparison with the experimental time series obtained with the long-period instruments of the WWSSN. The entire theoretical seismogram, including both body waves and surface waves, can be generated for a spherical, anelastic earth by simple inverse Fourier transformation of the sum of the propagating fundamental and higher-mode surface waves. The key to success in reproducing the WWSSN records involves the number of modes, and the minimum period used in these computations; here we use eight modes and a minimum period of 2 s. Efficient computational algorithms make it possible to handle up to 2000 frequency points for each mode; approximately 200 layers are used to model the radial heterogeneity of the earth; attenuation is treated exactly. Examples are given of the SH theoretical seismograms resulting from dislocation sources buried at various depths in the Earth.     

Constant normal-moveout (CNMO) correction: a technique and test results

We introduce a processing technique which minimizes the 'stretching effects' of conventional NMO correction. Unlike conventional NMO, the technique implies constant normal moveout (CNMO) for a finite time interval of a seismic trace. The benefits of the proposed method include preservation of higher frequencies and reduction of spectral distortions at far offsets. The need for severe muting after the correction is reduced, allowing longer spreads for stack, velocity and AVO analysis. The proposed technique has been tested on model and real data. The method may improve the resolution of CMP stack and AVO attribute analysis. The only assumptions for this stretch-free NMO correction are (i) all time samples of a digital reflected wavelet at a particular offset have the same normal moveout, and (ii) reflection records have an interference nature.     

Orion: A 1–5 Micron Focal Plane for the 21st Century

The Orion program is a project to develop a 2K × 2K infrared focal plane using InSb p-on-n diodes for detectors. It is the natural follow-up to the successful Aladdin 1K × 1K program started in the early 90's. The work is being done at the Raytheon Infrared Operations Division (RIO, previously known as the Santa Barbara Research Center) by many of the same people who created the Aladdin focal plane. The design is very similar to the successful Aladdin design with the addition of reference pixels, whole array readout (no quadrants), two-adjacent-side buttability, and a packaging design that includes going directly to the ultimate focal plane size of 4K × 4K. So far we have successfully made a limited number of hybrid modules with InSb detectors. In this paper we will describe the design features and test data taken from some of these devices. This revised version was published online in July 2006 with corrections to the Cover Date.     

Experimental study of igneous and sedimentary apatite dissolution: Control of pH, distance from equilibrium, and temperature on dissolution rates

Apatite dissolution experiments were conducted using both a fluidized bed and stirred tank reactor over a range of pH, temperature, solution saturation state, and on non-carbonated and carbonated apatite compositions: igneous fluorapatite (FAP) and sedimentary carbonate fluorapatite (CFA), respectively. From 2 <pH <6, the rate of release from dissolution of all apatite components [calcium (Ca), phosphorus (P), and fluoride (F)] increased with decreasing pH for FAP. From 6 < pH < 8.5, the FAP dissolution rate is pH independent. Measuring apatite dissolution rates at pH > 8.5 were not possible due to detection limits of the analytical techniques used in this study and the high insolubility of FAP. For the CFA compositions studied, the dissolution rate decreased with increasing pH from 4 < pH < 7. During early stages of the dissolution reaction for both FAP and CFA, mineral components were released in non-stoichiometric ratios with reacted solution ratios of dissolved Ca:P and Ca:F being greater than mineral stoichiometric ratios, suggesting that Ca was preferentially released compared to P and F from the mineral structure during the early stages of dissolution. An increase in reacted solution pH accompanies this early elevated release of Ca. As the dissolution reaction proceeded to steady state, dissolution became congruent. When normalized to BET measured surface area, FAP dissolved faster from 4 < pH < 7 compared to CFA. The apparent Arrhenius activation energy (E_a) of FAP dissolution over the temperature range of 25-55°C at pH = 3.0, I = 0.1, and pCO₂ = 0 is 8.3 ± 0.2 kcal mol⁻¹. Both the apparent exchange of solution H⁺ for solid-bound Ca at low pH in the early stage of dissolution and the E_a of dissolution suggest a surface and not a diffusion controlled dissolution reaction for FAP and CFA. The degree of undersaturation of the solution, ΔG_R, with respect to FAP was important in determining the dissolution rate. At pH = 3.0, I = 0.1, and pCO₂ = 0, the dissolution rate of FAP was ∼ 5× greater in the far-from-equilibrium region compared to the near-equilibrium slope region.A simple apatite weathering model incorporating the experimental results from this study was constructed, and numerical calculations suggest that during the Phanerozoic both the surface area of igneous rock available for weathering and the average global temperature were important factors in determining the P weathering flux from apatite dissolution. It is possible that elevated global temperatures coupled with relatively high surface area of igneous rock during the early- to mid-Paleozoic resulted in elevated P weathering fluxes, which along with climatic evolutionary pressures of the Neoproterozoic, facilitated the radiation of multicellular organisms, large-scale phosphorite deposition, and abundance of calcium phosphate shelled organisms during the early Cambrian.     

Nighttime convection in the interior of a dense Douglas fir forest

Infrared radiative surface temperatures as observed over a dense Douglas fir forest during stable atmospheric conditions are analyzed. It is shown that the concept of a single surface temperature to describe both the thermal coupling and the radiative coupling between atmosphere and forest fails when longwave cooling is large and wind speeds are low. In such cases a decoupling of the radiative surface temperature from the air temperature aloft is observed. Conditions for decoupling are formulated in terms of an appropriate Richardson number. It is shown that a convective surface temperature comes into play that is coupled to the forest interior air temperature. Observed radiative surface temperature is then composed of this convective surface temperature and the aerodynamic surface temperature. Forest interior air temperature during nighttime is, in general, lower than air temperature above the canopy. A simple two-layer canopy model is used to explain this phenomenon in terms of the distribution of atmospheric sensible heat flux and storage heat flux over the two canopy layers.