Aeromagnetic anomalies uncover the Precambrian basement in the Chhattisgarh basin area,Central India

This paper presents aeromagnetic images for the Chhattisgarh basin region, in Central India, to provide a new window on Precambrian basement geology and structure. On the basis of aeromagnetic patterns, the Chhattisgarh basin is sub-divided into a northern low (negative) anomaly zone and a southern high (positive) anomaly zone. The northern portion of the main Chhattisgarh basin has been further divided into two subbasins, the Hirri sub-basin in the west, and Baradwar sub-basin in the east. A prominent negative anomaly delineates a NW-SE trending greenstone belt separating these sub-basins. Positive magnetic anomalies delineate the extent of the Dongargarh granite and equivalents, while the weak magnetic anomaly in the southeast of the Dongargarh granite and equivalents reflect granulite gneisses of the Eastern Ghat Mobile Belt. By applying the reduced-to-the-equator filter we enhanced the possible magnetic sources and structural lineaments within the Chhattisgarh basin. A new sketch map of structural elements was then compiled from aeromagnetic interpretation over the Chhattisgarh basin area. It includes possible faults, folds and an inferred lithological boundary.     

The relationship between reference canopy conductance and simplified hydraulic architecture

Terrestrial ecosystems are dominated by vascular plants that form a mosaic of hydraulic conduits to water movement from the soil to the atmosphere. Together with canopy leaf area, canopy stomatal conductance regulates plant water use and thereby photosynthesis and growth. Although stomatal conductance is coordinated with plant hydraulic conductance, governing relationships across species has not yet been formulated at a practical level that can be employed in large-scale models. Here, combinations of published conductance measurements obtained with several methodologies across boreal to tropical climates were used to explore relationships between canopy conductance rates and hydraulic constraints. A parsimonious hydraulic model requiring sapwood-to-leaf area ratio and canopy height generated acceptable agreement with measurements across a range of biomes (r²=0.75)$(r^2=0.75)$. The results suggest that, at long time scales, the functional convergence among ecosystems in the relationship between water-use and hydraulic architecture eclipses inter-specific variation in physiology and anatomy of the transport system. Prognostic applicability of this model requires independent knowledge of sapwood-to-leaf area. In this study, we did not find a strong relationship between sapwood-to-leaf area and physical or climatic variables that are readily determinable at coarse scales, though the results suggest that climate may have a mediating influence on the relationship between sapwood-to-leaf area and height. Within temperate forests, canopy height alone explained a large amount of the variance in reference canopy conductance (r²=0.68)$(r^2=0.68)$ and this relationship may be more immediately applicable in the terrestrial ecosystem models.     

Geomorphological and sedimentological features in Quaternary fluvial systems affected by solution-induced subsidence (Ebro Basin, NE-Spain)

The Quaternary evolution and the morpho-sedimentary features of some of the most important rivers in Spain (Ebro and Tagus rivers among others) have been controlled by subsidence due to alluvial karstification of the evaporitic bedrock. The subsidence mechanism may range from catastrophic collapse to slow sagging of the alluvium by passive bending. In the Ebro Basin, the mechanisms and processes involved in karstic subsidence were studied through the analysis of present-day closed depressions as well as through old subsidence depressions (palaeocollapses and solution-induced basins) and associated deformations recorded in the Quaternary alluvial sediments. The Gállego–Ebro river system is presented as a case study of channel adjustments and geomorphic and sedimentary evolution of fluvial systems in dissolution-induced subsidence areas. In this fluvial system, evaporite dissolution during particular Quaternary time intervals (namely early and middle Pleistocene) have lead to the development of a solution-induced basin, approximately 30 km-long by 8 km-wide, filled by Quaternary deposits with a total thickness in excess of 190 m. The main river response to balance the subsidence in the alluvial plain was aggradation in the central reach of the subsiding area, and degradation both in the upstream reach and in the valley sides where alluvial fans and covered pediments may prograde over the fluvial sediments. The main sinking areas are recognized in the sedimentary record by anomalous thickenings in the alluvial deposits and fine-grained sediments deposited in backswamp and ponded areas.     

Magnetic susceptibility and electrical conductivity as a proxy for evaluating soil contaminated with arsenic,cadmium and lead in a metallurgical area in the San Luis Potosi State,Mexico

A total of 113 samples of waste and soil were collected from a site in the state of San Luis Potosi, Mexico, that was occupied for several years by the metallurgical industry. Specific magnetic susceptibility (MS), electrical conductivity (EC) and pH were determined, as well as the total and available concentrations of potentially toxic elements (PTEs) such as As, Cd, Cu, Fe, Pb and Zn, which may cause a health risk for humans, animals and ecosystems, and the concentrations of major ions in aqueous extracts of soils and wastes. The solid phases of the samples were also characterized. The results revealed that the soils and wastes exhibited elevated values of PTEs, MS and EC. For soils these values decreased with increasing distance from the waste storage sites. The MS values were elevated primarily due to the presence of Fe-oxyhydroxides, such as magnetite, hematite and goethite, which contain PTEs in their structure leading to a high correlation between the value of MS and the As, Cd, Fe and Pb contents (r = 0.57–0.91) as well as between the PTEs values (r = 0.68–0.92). The elevated EC values measured in the metallurgical wastes were the result of presence of the sulfate minerals of Ca, Mg and Fe. The pollution index, which indicates the levels of simultaneous toxicity from elements such as As, Cd and Pb, was determined, with extreme hazard zones corresponding to areas that exhibit high MS values (0.91 correlation). In conclusion, MS measurements can be used as an indirect indicator to evaluate the PTE contamination in metallurgical areas, and EC measurements can aid in the identification of pollution sources.     

Palaeokarst and rauhwacke development,mountain uplift and subaerial sliding of tectonic sheets (northern Sierra de los Filabres,Betic Cordilleras,Spain)

The rauhwackes near Serón in the northern Sierra de los Filabres (S Spain), previously considered as true tectonic breccias, are reinterpreted on the basis of sedimentological, geomorphological and geometrical evidence as subaerial or nearly subaerial sedimentary deposits. Channel fills, parallel lamination, cross-lamination, graded bedding, sedimentary clastic dykes and other sedimentary structures and features occur in the rauhwacke body. These sedimentary rocks correspond to continental deposits of alluvial and karstic origin deposited over a karstified erosional surface of Nevado–Filabride marbles. Although no fossils have been found in the rauhwackes, a Tortonian age for these rocks is suggested on the basis of structural arguments and lithostratigraphic data from the nearby Almanzora basin. The rauhwackes were buried by slabs of Alpujarride rocks that gravitationally slid over them during the uplifting of the Sierra de los Filabres.     

Diffuse Emission of CO2 from Showa-Shinzan, Hokkaido, Japan: A Sign of Volcanic Dome Degassing

Two soil CO₂ efflux surveys were carried out in September 1999 and June 2002 to study the spatial distribution of diffuse CO₂ degassing and estimate the total CO₂ output from Showa-Shinzan volcanic dome, Japan. Seventy-six and 81 measurements of CO₂ efflux were performed in 1999 and 2002, respectively, covering most of Showa-Shinzan volcano. Soil CO₂ efflux data showed a wide range of values up to 552 g m^-2 d^-1. Carbon isotope signatures of the soil CO₂ ranged from -0.9‰ to -30.9‰, suggesting a mixing between different carbon reservoirs. Most of the study area showed CO₂ efflux background values during the 1999 and 2002 surveys (B = 8.2 and 4.4 g m^-2 d^-1, respectively). The spatial distribution of CO₂ efflux anomalies for both surveys showed a good correlation with the soil temperature, indicating a similar origin for the extensive soil degassing generated by condensation processes and fluids discharged by the fumarolic system of Showa-Shinzan. The total diffuse CO₂ output of Showa-Shinzan was estimated to be about 14.0–15.6 t d^-1 of CO₂ for an area of 0.53 km².     

Depositional environment in and around Tamiraparani estuary,and off Tuticorin,Tamil Nadu,India: clues from grain size studies

The sediments of the estuaries and offshore Tuticorin along the southern coast of Tamil Nadu were studied for their textural variation. Ninety sediment samples were collected from three sectors (river, estuary, offshore) on the basis of prevailing energy conditions and oceanographic parameters. Frequency curves show unimodal to bimodal in nature. Offshore samples also fall in bimodal with medium and fine sand where sediment is additionally deposited by the Tamiraparani River. The mean values ranging from 1.69 to 2.01 φ with medium to fine sand. The fine sand in the riverine region indicates the depositional nature of the sediments. In pre-monsoon, the standard deviation ranges from 0.29 to 0.81 φ, which falls in the very well sorted to moderately well sorted. Estuary ranges from 0.63 to 1.30 φ, with moderately sorted, whereas in the marine sediments ranges from 0.4 to 1.01 φ, with moderately to moderately well- sorted and some patches of poorly sorted is observed. In both monsoons, the grain size variations are mostly influenced in river and offshore samples compared to the estuaries. The CM pattern indicates the deposition of sediments in graded suspension. In estuary, the sediments are medium sand with moderately to poorly sorted, fine skewed which are indicative of denudation processes taking place there. In marine, the sediments are medium-to-fine, moderately-to-well sorted, and fine skewed to very fine skewed sediments, probably as a result of the influence of palaeo-sediments deposited by rivers from inland as well as by waves and currents from offshore. Further, the marine samples also highlight depositional processes.     

Modeling flocculation in a hypertidal estuary

When fine particles are involved, cohesive properties of sediment can result in flocculation and significantly complicate sediment process studies. We combine data from field observations and state-of-the-art modeling to investigate and predict flocculation processes within a hypertidal estuary. The study site is the Welsh Channel located at the entrance of the Dee Estuary in Liverpool Bay. Field data consist of measurements from a fixed site deployment during 12–22 February 2008. Grain size, suspended sediment volume concentration, and current velocity were obtained hourly from moored instruments at 1.5 m above bed. Near-bottom water samples taken every hour from a research vessel are used to convert volume concentrations to mass concentrations for the moored measurements. We use the hydrodynamic model Proudman Oceanographic Laboratory Coastal Ocean Modelling System (POLCOMS) coupled with the turbulence model General Ocean Turbulence Model (GOTM) and a sediment module to obtain three-dimensional distributions of suspended particulate matter (SPM). Flocculation is identified by changes in grain size. Small flocs were found during flood and ebb periods—and correlate with strong currents—due to breakup, while coarse flocs were present during slack waters because of aggregation. A fractal number of 2.4 is found for the study site. Turbulent stresses and particle settling velocities are estimated and are found to be related via an exponential function. The result is a simple semiempirical formulation for the fall velocity of the particles solely depending on turbulent stresses. The formula is implemented in the full three-dimensional model to represent changes in particle size due to flocculation processes. Predictions from the model are in agreement with observations for both settling velocity and SPM. The SPM fortnight variability was reproduced by the model and the concentration peaks are almost in phase with those from field data.     

Provenance of Holocene beach sand in the Western Iberian margin: the use of the Kolmogorov–Smirnov test for the deciphering of sediment recycling in a modern coastal system

Detrital zircons from Holocene beach sand and igneous zircons from the Cretaceous syenite forming Cape Sines (Western Iberian margin) were dated using laser ablation – inductively coupled plasma – mass spectrometry. The U–Pb ages obtained were used for comparison with previous radiometric data from Carboniferous greywacke, Pliocene–Pleistocene sand and Cretaceous syenite forming the sea cliff at Cape Sines and the contiguous coast. New U–Pb dating of igneous morphologically simple and complex zircons from the syenite of the Sines pluton suggests that the history of zircon crystallization was more extensive (ca 87 to 74 Ma), in contrast to the findings of previous geochronology studies (ca 76 to 74 Ma). The U–Pb ages obtained in Holocene sand revealed a wide interval, ranging from the Cretaceous to the Archean, with predominance of Cretaceous (37%), Palaeozoic (35%) and Neoproterozoic (19%) detrital‐zircon ages. The paucity of round to sub‐rounded grains seems to indicate a short transportation history for most of the Cretaceous zircons (ca 95 to 73 Ma) which are more abundant in the beach sand that was sampled south of Cape Sines. Comparative analysis using the Kolmogorov–Smirnov statistical method, analysing sub‐populations separately, suggests that the zircon populations of the Carboniferous and Cretaceous rocks forming the sea cliff were reproduced faithfully in Quaternary sand, indicating sediment recycling. The similarity of the pre‐Cretaceous ages (>ca 280 Ma) of detrital zircons found in Holocene sand, as compared with Carboniferous greywacke and Pliocene–Pleistocene sand, provides support for the hypothesis that detritus was reworked into the beach from older sedimentary rocks exposed along the sea cliff. The largest percentage of Cretaceous zircons (<ca 95 Ma) found in Holocene sand, as compared with Pliocene–Pleistocene sand (secondary recycled source), suggests that the Sines pluton was the one of the primary sources that became progressively more exposed to erosion during Quaternary uplift. This work highlights the application of the Kolmogorov–Smirnov method in comparison of zircon age populations used to identify provenance and sediment recycling in modern and ancient detrital sedimentary sequences.     

Anthropogenic subsidence in the Mexicali Valley,Baja California,Mexico, and slip on the Saltillo fault

Deep fluid extraction in the Cerro Prieto geothermal field (CPGF) has caused subsidence and induced slip on tectonic faults in the Mexicali Valley (Baja California, Mexico). The Mexicali Valley is located in the southern part of the Salton Trough, at the boundary between the Pacific and North American plates. The Valley is characterized by being a zone of continuous tectonic deformation, geothermal activity, and seismicity. Within the Cerro Prieto pull-apart basin, seismicity is concentrated mainly in swarms, while strong earthquakes have occurred in the Imperial and Cerro Prieto transform faults, that are the eastern and western bound of the basin. Since 1973, fluid extraction at the CPGF has influenced deformation in the area, accelerating the subsidence and causing rupture (frequently as vertical slip or creep) on the surface traces of tectonic faults. Both subsidence and fault slip are causing damage to infrastructure like roads, railroad tracks, irrigation channels, and agricultural fields. Currently, accelerated extraction in the eastern part of CPGF has shifted eastwards the area of most pronounced subsidence rate; this accelerated subsidence can be observed at the Saltillo fault, a southern branch of the Imperial fault in the Mexicali Valley. Published leveling data, together with field data from geological surveys, geotechnical instruments, and new InSAR images were used to model the observed deformation in the area in terms of fluid extraction. Since the electricity production in the CPGF is an indispensable part of Baja California economy, extraction is sure to continue and may probably increase, so that the problem of damages caused by subsidence will likely increase in the future.