Effect of the addition of granitic powder to an acidic soil from Galicia (NW Spain) in comparison with lime

The impact of diffuse pollution, agricultural land use and climate change on the long-term response of subsurface–surface water quality is not well understood, but is a prerequisite for evaluation of water management options. The goal of this study is to model geochemical evolution of water chemistry from the infiltration through soil into the unsaturated zone, transport through bedrocks and granular aquifers to a river in order to identify zones of steep concentration gradients and high dynamics under transient flow conditions. A numerical model was constructed comprising a 2-D 1,500 m × 150 m vertical cross-section of typical sedimentary rock formations, a glacio-fluvial quaternary gravel aquifer in the valley and soil layers. The model coupled saturated/un-saturated flow and reactive transport under steady state and transient conditions. Geochemical interactions, include intra-aqueous kinetic reactions of oxygen with dissolved organic matter, as well as kinetics of carbonate dissolution/precipitation. This model section was chosen to provide insight in to the principal processes and time scales affecting water chemistry along different flow paths. The numerical simulator MIN3P was used, a finite volume program for variably saturated subsurface flow and multi-component reactive transport. The results show that subsurface water residence times range from approximately 2 to 2,000 years. Different zones are to be expected with respect to the development of mineral equilibria; namely, purely atmospherically influenced, as well as open and closed system carbonate dissolution. Short-term responses to daily averaged changes in precipitation, however, are only visible to some extent in the shallower and near-river parts of flow system and solute loads. This can most likely be explained by directional changes in flow paths, indicating that equilibrium geochemical condition predominate at the hillslope scale, i.e. water quality depends on transport pathways rather than on kinetic effects. The extent of reducing conditions is controlled by the presence of organic-rich layers (i.e. peat deposits), the dissolution kinetics of aquifer organic matter and the subsequent mixing with oxygenated water by hydrodynamic dispersion.     

Influence of Mussel Culture on the Vertical Export of Phytoplankton Carbon in a Coastal Upwelling Embayment (Ría de Vigo,NW Iberia)

The goal of this paper is to find out whether suspended mussel culture affects the vertical fluxes of biogenic particles in the Ría de Vigo on a seasonal scale. With this aim, vertical fluxes of particulate organic carbon (POC) and the magnitude and composition of vertical export of phytoplankton carbon (Cphyto) collected in sediment traps were examined by comparing data obtained inside a mussel farming area (RaS) with those found at a reference station (ReS) not affected by mussels. Our results indicate that mussel farming has a strong impact on sedimentation fluxes under the rafts, not only increasing POC flux but also altering the magnitude and composition of Cphyto fluxes. Average POC flux at RaS (2564?±?1936 mg m^?2 day^?1) was four times higher than at ReS (731?±?276 mg m^?2 day^?1), and much of this increase was due to biodeposit fluxes (Cbiodep) which accounted for large proportion of POC flux (35–60 %). Indeed, because of this high Cbiodep flux, only a small proportion of the POC flux was due to Cphyto flux (3–12 %). At the same time, we observed an increased sedimentation of phytoplankton cells at RaS that could be explained by a combination of mechanisms: less energetic hydrodynamic conditions under mussel rafts, ballast effect by sinking mussel feces, and diatom aggregates. Moreover, mussel farming also altered the quality of the Cphyto flux by removing part of the predatory pressure of zooplankton and thus matching diatom composition in water column and sediment traps.     

Identity of the characteristics of electrodynamic seismographs with non-standard periods of seismometers and galvanometers

Summary The maximum changes of magnification were determined for electrodynamic seismographs with standard characteristics and for some experimental long-period seismographs, the constants of which are given in Tab. 1, when the period of the seismometer or galvanometer has a deviation of not more than 5% from the standard value. Under the assumption of control of the other constants of the seismograph, identical amplitude and phase responses with a small change of the absolute magnification of the seismograph may be achieved with characteristicsAII ( ² >0.2), AIV ( ² 0.4), B ( ² >0.3) Nos28, 32 and33. This deviation can also be compensated by adjusting the optical distance. The procedure of adjusting the identical characteristics is suitable for systems with which an accurate setting of the period is difficult and for systems with an uncontrollable period, provided their values are within the limits of allowed deviations from the standard constants.     

3D-Monitoring Big Geo Data on a seaport infrastructure based on FIWARE

Many organizations of all kinds are using new technologies to assist the acquisition and analysis of data. Seaports are a good example of this trend. Seaports generate data regarding the management of marine traffic and other elements, as well as environmental conditions given by meteorological sensors and buoys. However, this enormous amount of data, also known as Big Data, is useless without a proper system to organize, analyze and visualize it. SmartPort is an online platform for the visualization and management of a seaport data that has been built as a GIS application. This work offers a Rich Internet Application that allows the user to visualize and manage the different sources of information produced in a port environment. The Big Data management is based on the FIWARE platform, as well as “The Internet of Things” solutions for the data acquisition. At the same time, Glob3 Mobile (G3M) framework has been used for the development of map requirements. In this way, SmartPort supports 3D visualization of the ports scenery and its data sources.     

Shear wave crustal velocity model of the Western Bohemian Massif from Love wave phase velocity dispersion

We propose a new quantitative determination of shear wave velocities for distinct geological units in the Bohemian Massif, Czech Republic (Central Europe). The phase velocities of fundamental Love wave modes are measured along two long profiles (~200 km) crossing three major geological units and one rift-like structure of the studied region. We have developed a modified version of the classical multiple filtering technique for the frequency-time analysis and we apply it to two-station phase velocity estimation. Tests of both the analysis and inversion are provided. Seismograms of three Aegean Sea earthquakes are analyzed. One of the two profiles is further divided into four shorter sub-profiles. The long profiles yield smooth dispersion curves; while the curves of the sub-profiles have complicated shapes. Dispersion curve undulations are interpreted as period-dependent apparent velocity anomalies caused both by different backazimuths of surface wave propagation and by surface wave mode coupling. An appropriate backazimuth of propagation is found for each period, and the dispersion curves are corrected for this true propagation direction. Both the curves for the long and short profiles are inverted for a 1D shear wave velocity model of the crust. Subsurface shear wave velocities are found to be around 2.9 km/s for all four studied sub-profiles. Two of the profiles crossing the older Moldanubian and Teplá-Barrandian units are characterized by higher velocities of 3.8 km/s in the upper crust while for the Saxothuringian unit we find the velocity slightly lower, around 3.6 km/s at the same depths. We obtain an indication of a shear wave low velocity zone above Moho in the Moldanubian and Teplá-Barrandian units. The area of the Eger Rift (Teplá-Barrandian–Saxothuringian unit contact) is significantly different from all other three units. Low upper crust velocities suggest sedimentary and volcanic filling of the rift as well as fluid activity causing the earthquake swarms. Higher velocities in the lower crust together with weak or even missing Moho implies the upper mantle updoming.     

About the Efficiency of Numerical 1-D and 2-D Modelling of Site Effects in Basin Structures

—In the present study we compare results obtained from experimental estimates of local site amplification effects with those from numerical modelling using four different techniques. We benefit from an extremely precise knowledge of the near-surface structure and experimental estimates of the local amplification factors which are determined from seismic weak-motion data recorded by a dense array across a sedimentary basin at a European test-site in Northern Greece. The possibilities and limitations of the different modelling techniques (a 1-D technique, and three 2-D techniques) to model the effects of local amplification effects are tested. Amplifications calculated by the numerical techniques are only qualitatively compared with observed data from experimental studies in the time domain and directly in the frequency domain.¶As a result we conclude that, in the case of a complex subsurface geometry, 1-D modelling underestimates the amplification patterns in terms of absolute amplification level, and cannot correctly account for resonant frequencies, at least for modes higher than the fundamental mode. If a more realistic incident wave field than just a plane wave is taken into account, 2-D modelling reveals the fundamental frequency and shows adequate amplifications not only at the fundamental frequency but also at higher frequencies. The general trend of the amplifications at the lowest frequencies is well determined by the 2-D numerical modelling, and can therefore supply information for seismic risk analysis.     

Paleogeothermal gradient in the boskovice furrow

Summary A coalification data set from the first seam of the Rosice-Oslavany coal district in the Boskovice furrow was used to estimate the temperature gradient prevailing within the furrow during Autunian sedimentation. An appreciable scatter of the data reflects the complicated history of the sedimentary region. The northern part of the district displays a higher degree of coalification. The results of the evaluation suggest that the region ceased to subside in the upper Autunian, and that the extent of the post-Autunian erosion does not exceed 500 metres. This version of the burial history, which is consistent with geological data, yields a temperature paleogradient of 76 mK/m for the northern part and of 72 mK/m for the southern part of the district. The gradients estimated are higher than those prevailing during the Carboniferous sedimentation in the Central Bohemian Basin (45 – 53 mK/m), lower than values found for the Ostrava Formation in the Upper Silesian Basin during its Namurian A sedimentation (about 95 mK/m), but comparable with values evaluated for the Karviná Formation of the same basin deposited during the Namurian B - C and Westphalian A (60 – 77 mK/m).Dedicated to the Memory of Professor Karel P     

Multiepisodic evaporite sedimentation as an indicator of palaeogeographical evolution in foreland basins (South‐eastern Pyrenean basin,Early–Middle Eocene)

Extensive deposition of marine evaporites occurred during the Early–Middle Eocene in the South‐eastern Pyrenean basin (north‐east Spain). This study integrates stratigraphic and geochemical analyses of subsurface data (oil wells, seismic profiles and gravity data) together with field surveys to characterize this sedimentation in the foredeep and adjacent platform. Four major evaporite units were identified. The oldest was the Serrat Evaporites unit, with a platform‐slope‐basin configuration. Thick salina and sabkha sulphates accumulated on the platform, whereas resedimented and gravity‐derived sulphates were deposited on the slope, and salt and sulphates were deposited in the deep basin. In the subsequent unit (Vallfogona evaporites), thin sulphates formed on the platform, whereas very thick siliciclastic turbidites accumulated in the foredeep. However, some clastic gypsum coming from the platform (gypsarenites and gypsum olistoliths) was intercalated in these turbidites. The following unit, the Beuda Gypsum Formation developed in a sulphate platform‐basin configuration, where the topography of the depositional surface had become smooth. The youngest unit, the Besalú Gypsum, formed in a shallow setting. This small unit provides the last evidence of marine influence in a residual basin. Sulphur and oxygen isotope compositions are consistent with a marine origin for all evaporites. However, δ³⁴S and δ¹⁸O values also suggest that, except for the oldest unit (Serrat Evaporites), there was some sulphate recycling from the older into the younger units. The South‐eastern Pyrenean basin constitutes a fine example of a foreland basin that underwent multiepisodic evaporitic sedimentation. In the basin, depositional factors evolved with time under a structural control. Decreasing complexity is observed in the lithofacies, as well as in the depositional models, together with a diminishing thickness of the evaporite units.     

Population dynamics of cryptogenic calcarean sponges (Porifera,Calcarea) in Southeastern Brazil

The calcarean sponge Paraleucilla magna is classified as being an invasive species on the Mediterranean Sea, where it causes economic damages to mollusc farms. On the Brazilian coast, this species is considered to be cryptogenic, and information on its ecology is scarce. The same is true for Sycettusa hastifera, another calcarean sponge with a worldwide distribution. Data on the ecology of these species could help in elucidating their potential to become a threat if they are found to be exotic species in Brazil. In the present work, we studied habitat selection, growth and mortality of early juveniles of P. magna and habitat selection of S. hastifera in a Marine Reserve from Southeastern Brazil, where these species are abundant in the benthic community. Granite plates were used for habitat selection analysis, varying in substrate inclination (vertical and horizontal) and exposure to light and hydrodynamism (exposed and sheltered). To analyse the growth and mortality rates, sponges were mapped and then measured once a week for 10 weeks. If a monitored sponge was not found in the following week, it was considered to be dead. Our results showed that, although P. magna and S. hastifera are capable of inhabiting substrates exposed to different environmental conditions, they showed habitat preferences. Growth of the juveniles of P. magna seemed not to have damaged any neighbouring invertebrates. The mortality of juveniles of this species was higher during the first 2 weeks of life but its causes could not be elucidated.