Local scouring and morphological adjustments in steep channels with check-dam sequences

This paper describes bed profile and grain size distribution adjustments in a mountain river (Maso di Spinelle River, Italian Alps) stabilized by a sequence of boulder check-dams. The control works were originally designed to simulate the geometry of natural step-pool channels, where tumbling flow is the dominant hydraulic regime. Local scouring downstream of 29 drop structures is analysed through the use of nondimensional parameters where maximum scour depth and scour length are normalised to the drop height. Prior laboratory data reveal a pattern similar to field scours, where complex interactions occur between drop height, critical flow depth, and step spacing. The linkage between scour length and depth is also discussed. There seems to be a maximum step height for impinging jets that is approximately twice the drop height; this maximum may explain the upper limit of the steepness factor found in high-gradient step-pool streams. If such a maximum upper limit is confirmed by further studies, this may aid designs of foundation heights for transverse control works in steep channels.     

Interference processes on scouring at bed sills

The local scouring downstream of bed sills forming a sequence for bed stabilization in steep channels has been investigated in a laboratory flume. The initial bed slopes ranged from 0·078 to 0·148. The bed alluvium was characterised by a non‐uniform grain size distribution. The results show that when the ratio between the critical water depth h_c and the sill spacing L rises above a characteristic value the scouring dynamics become heavily affected by the presence of the downstream sill, associated with the onset of a form of “interference” which renders the scouring process less effective. The difference with an “undisturbed” case is demonstrated. Self‐affinity of scour holes is confirmed and the scour length appears to be the reference parameter from which the scour depth might be evaluated. Copyright © 2003 John Wiley & Sons, Ltd.     

La polvere meteorica salina del gennaio 1940

Riassunto L'A. descrive il fenomeno della caduta di polvere meteorica verificatosi in parte delle Venezie e dell'Emilia nei giorni 11–13 gennaio 1940, esaminandolo in rapporto alla situazione atmosferica ed ai danni causati alle linee elettriche. L'indagine chimica e fisica della polvere caduta rivela la sua origine marina, dimostrando come tale fenomeno sia da ascriversi alla rapida evaporazione dell'acqua del mare, favorita dalla secchezza e dall' intensità della bora.

---

Summary The Author describes the phenomenon of the fall of meteoric dust which happened in a part of the Venezie and Emilia in the days 11–13 January 1940, and examines it in connection with the atmospheric situation and the damages to the electric lines. Chemical and physical inspection of the dust reveals its marine origin, showing that the above said phenomenon should be ascribed to the quick evaporation of sea-water favoured by the dryness and intensity of the bora.

---

Zusammenfassung Der Verf. beschreibt die Erscheinung des meteorischen Staubfalles auf einem Teil der Venetien und der Emilien in den Tagen 11.–13. Januar 1940, unter Berücksichtigung der Wetterlage und der Beschädigungen welche auf die elektrischen Leitungen verursacht wurden. Die chemische und physikalische Untersuchung des gefallenen Staubes zeigt seine marine Herkunft und gibt den Beweis, dass die Erscheinung auf die schnelle Verdunstung des Meererwassers die von der Bore hervorgerufen wurde zugeschrieben werden soll.

     

Holocene stratigraphy and depositional architecture of eastern Pozzuoli Bay (eastern Tyrrhenian Sea margin,Italy): the influence of tectonics and wave-induced currents

Pozzuoli Bay is located in the eastern Tyrrhenian Sea and is an area characterized by active tectonics and volcanism. On the basis of high-resolution seismic reflection profiles, it was possible to reconstruct the stratigraphy and three-dimensional stratal architecture of the Holocene succession. Two volcanic units and three sedimentary ones were recognized. The basal unit NC consists of volcanic deposits and dates at 10.0-8.0 ka B.P. It is followed by unit D, deposited between 8.0 and 5.5 ka B.P., which displays a backstepping configuration in the central area and a forestepping configuration in the northern area. Unit D is covered by the progradational unit B which is elongated in a SE-NW direction. Unit C is interbedded between unit B and is interpreted as the volcanic products of the Agnano-Monte Spina eruption which occurred 4.4 B.P. Unit A, the youngest unit, shows a progradational configuration and is elongated in a E-W direction. The sedimentary units record the transgressive and highstand of the eustatic sea level. They show vertical and lateral variations in the depositional architecture. Changes in the stacking pattern record variations in tectonic subsidence and hydrodynamic regimes.     

Variability of Mediterranean coralligenous assemblages subject to local variation in sediment deposition

This study tested whether the development of coralligenous assemblages on horizontal and vertical surfaces differed between localities of high and low sediment deposition. The development and structure of these assemblages varied in predictable ways according to the level of sediment deposition. These differences were largely independent of the orientation of substratum. Turfs were more extensive in areas of high sediment deposition while erect and encrusting algae were most extensive in areas of low sediment deposition. Encrusting invertebrates characterised vertical surfaces and were most extensive in areas of high sediment deposition. These results are consistent with studies from other temperate regions of the globe, suggesting that effects of sedimentation on temperate coasts are substantial and widespread.     

Modelling of natural and synthetic polyelectrolyte interactions in natural waters by using SIT, Pitzer and Ion Pairing approaches

In this paper SIT and Pitzer models are used for the first time to describe the interactions of natural and synthetic polyelectrolytes in natural waters. Measurements were made potentiometrically at 25 °C in single electrolyte media, such as Et₄NI and NaCl (for fulvic acid 0.1 < I /mol L^− 1 < 0.75), and in a multi-component medium simulating the composition of natural waters at a wide range of salinities (for fulvic and alginic acids: 5 < S < 45) with particular reference to sea water [Synthetic Sea Water for Equilibrium studies, SSWE]. In order to simplify calculations, SSWE was considered to be a “single salt” BA, with cation B and anion A representing all the major cations (Na⁺, K⁺, Mg²⁺, Ca²⁺) and anions (Cl⁻, SO₄²⁻) in natural sea water, respectively. The ion pair formation model was also applied to fulvate and alginate in artificial sea water by examining the interaction of polyanions with the single sea water cation. Results were compared with those obtained from previous speciation studies of synthetic polyelectrolytes (polyacrylic and polymethacrylic acids of different molecular weights). Results indicate that the SIT, Pitzer and Ion Pairing formation models used in studies of low molecular weight electrolytes may also be applied to polyelctrolytes with a few simple adjustments.     

Innovative monitoring tools for the complex spatial dynamics of river chemistry: case study for the Alpine region

Chemical reactions in aqueous geochemical systems are driven by nonequilibrium conditions, and their dynamics can be deduced through the distributional analysis (identification of probability laws) of complex compositional indices. In this perspective, compositional data analysis offers the possibility to investigate the behavior of the composition as a whole instead of isolated chemical species, with the awareness that multispecies systems are characterized by the simultaneous interactions among all their parts. We addressed this problem using D???1 isometric log-ratio coordinates describing the D compositional dataset of the river chemistry of the Alpine region (D number of variables), thus working in the \({{\mathbb{R}}^{D - 1}}\) statistical sample space. The D???1 coordinates were chosen using the decreasing variance criterion so that each one could provide information about different space–time properties for the investigated geochemical system. Coordinates dominated by heterogeneity appear to be able to capture regime shifts only on a long-time period and monitor processes on a very wide scale. On the other hand, coordinates characterized by lower variability present multimodality, thus capturing the presence of alternative states in the analyzed spatial domain also for the current time. Further developments are needed to determine the ranges of conditions for which variability and other statistics can be useful indicators of regime shifts on different time–space scales in geochemical systems.