Magnetic,geochemical and mineralogical properties of sediments from karstic and flysch rivers of Croatia and Slovenia

The aim of the present work was to investigate links between the low-field magnetic susceptibility (MS) and chemical and mineral composition of sediments from several Croatian and Slovenian rivers, as well as to determine possible anthropogenic influence on these sediments. MS measurements are a fast and simple method, which serves as a proxy for the estimation of pollution in different environmental systems. The investigated rivers are predominantly unpolluted rivers from Croatian and Slovenian karstic and flysch areas, which belong to the Adriatic or the Black Sea watersheds: the Dragonja, the Mirna, the Ra?a, the Ri?ana, the Reka, the Rak, the Cerkni?nica, the Unec and the Ljubljanica rivers. It was assumed that, due to their mostly unpolluted status, they could serve as a database for natural MS background values for this region. For comparison, several rivers and a lake from the Celje old metallurgic industrial area (Slovenia) were also investigated: the Savinja, the Hudinja, the Voglajna rivers and Slivni?ko Lake. They form a sub-basin of the Sava River drainage basin. Sediments of the clean karstic and flysch rivers showed extremely low MS values, with mass susceptibility values ranging from 0.58 × 10^?7 to 5.11 × 10^?7 m³/kg, and isothermal remanent magnetism (IRM) values ranging from 0.71 to 7.88 A/m. In the Celje industrial area, river sediments showed much higher MS values, with mass susceptibility values ranging from 1.31 × 10^?7 to 38.3 × 10^?7 m³/kg, and IRM values ranging from 0.91 to 100.42 A/m. The highest MS value was found in the Voglajna River at Teharje-?tore, a point which showed a significant number of anomalies of toxic metals in earlier investigations. Semiquantitative determination of relations between grain size and concentration of magnetite was performed using the Thompson-Oldfield method. X-ray diffraction (XRD) mineralogical analysis showed that sediments of the Celje area have mostly quartz as major mineral, with relatively small amount of carbonate minerals, while in sediments of karstic rivers carbonate minerals prevail. Statistically significant correlations were obtained between MS and Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd and Ba in the Slovenian karstic region and between MS and Cr, Fe, Co, Ni and Zn in flysch drainage basins. On the contrary, no correlation of MS and Hg content was obtained.     

Investigation of the effect of specific interfacial area on strength of unsaturated granular materials by X-ray tomography

This paper studies the effect of interfacial areas (air–water interfaces and solid–water interfaces) on material strength of unsaturated granular materials. High-resolution X-ray computed tomography technique is employed to measure the interfacial areas in wet glass bead samples. The scanned 3D images are trinarized into three phases and meshed into representative volume elements (RVEs). An appropriate RVE size is selected to represent adequate local information. Due to the local heterogeneity of the material, the discretized RVEs of the scanned samples actually cover a very large range of degree of saturation and porosity. The data of RVEs present the relationship between the specific interfacial areas and degree of saturation and gives boundaries where the interfacial area of a whole sample should fall in. In parallel, suction-controlled direct shear tests have been carried out on glass beads and the material strength has been corroborated with two effective stress definitions related to the specific air–water interfacial areas and fraction of wetted solid surface, respectively. The comparisons show that the specific air–water interfacial area reaches the peak at about 25% of saturation and contributes significantly to the material strength (up to 60% of the total capillary strength). The wetted solid surface obtained from X-ray CT is also used to estimate Bishop’s coefficient χ based on the second type of effective stress definition, which shows a good agreement with the measured value. This work emphasizes the importance to include interface terms in effective stress formulations of unsaturated soils. It also suggests that the X-ray CT technique and RVE-based multiscale analysis are very valuable in the studies of multiphase geomaterials.

     

Distribution of deep carbon dioxide in relation to the structure and tectonic evolution of south-east France

Abstract

Throughout SE France, ¹³C-values of CO₂releases suggest that a variable part of the C0₂ emission derives from mantle and/or lower crust. Carbon dioxide emission takes place in various geological settings. Geodynamical analyses lead to the identification of five provinces: the Sub-Alpine Ranges, the French Massif Central, the Mediterranean part of the Languedoc, the western Pyrénées and the Alps at the West of the Penninic front. Possible correlations are suggested between CO₂ flux and tectonic history of the structural provinces.

Possible processes by which CO₂ is extracted from the mantle, stored and transferred to the surface are investigated for each of these provinces. Major crustal scale gas movements may have taken place during the Carboniferous (Variscan and Late Variscan tectogenesis), the Lias and Dogger (rifting), the Upper Cretaceous and the Cenozoic (Alpine tectogenesis), A model of successive circulations of fluids on the scale of the whole Southeastern France CO₂-belt is proposed. This integrated isotopic and geodynamic approach contributes to a better understanding of the regional CO₂flux.     

Fault systems and paleostresses in the Vestfirdir Peninsula. Relationships with the Tertiary paleo-rifts of Skagi and Snaefells (Northwest Iceland)

Abstract

The Vestfirdir Peninsula of northwestern Iceland mainly consists of tholeiitic lava flows, 8–14 Ma old, gently dipping to the southeast. A detailed study of strike-slip and normal faulting allowed identification of two main paleostress regimes. Two sets of normal faults were recognized. The largest set trends ENE-WSW to NNE-SSW; the minor set trends NW-SE to WNW-ESE. Concerning the major extension, the reconstruction of paleostress trajectories shows a gradual change in trend from ESE-WNW, in the northern half of the peninsula, to NNW-SSE to the south. The minor extension also shows a gradual change from NNE-SSW to ENE-WSW trends, from north to south. The nearly constant perpendicularity between the major and minor trends of extension is accounted for by permutation of stress axes within the general pattern of extension related to oceanic rifting. The progressive azimuthal change of the major extension trend, from northeast to southwest across the peninsula, is interpreted as the expression of a change in trend of the extinct Skagi-Snaefells rift, a structure that cannot be reconstructed directly through geological mapping. The average trends of extension in the southern Vestfirdir Peninsula, N150°E, suggest a N60°E trend for the ancient Snaefells rift segment. Likewise, the N100–110°E trends of extension in northern Vestfirdir suggest a N10–20°E trend for the Skagi paleo-rift., © Elsevier, Paris     

Experimental and theoretical study of the structural environment of magnesium in minerals and silicate glasses using X-ray absorption near-edge structure

X-ray absorption spectroscopy at the Mg K-edge is used to obtain information on magnesium environment in minerals, silicate and alumino-silicate glasses. First-principles XANES calculations are performed for minerals using a plane-wave density functional formalism with core-hole effects treated in a supercell approach. The good agreement obtained between experimental and theoretical spectra provides useful information to interpret the spectral features. With the help of calculation, the position of the first peak of XANES spectra is related to both coordination and polyhedron distortion changes. In alumino-silicate glasses, magnesium is found to be mainly 5-fold coordinated to oxygen whatever the aluminum saturation index value. In silicate glasses, magnesium coordination increases from 4 in Cs-, Rb- and K-bearing glasses to 5 in Na- and Li-bearing glasses but remains equal as the polymerization degree of the glass varies. The variation of the C feature (position and intensity) is strongly related to the alkali type providing information on the medium range order.

Baossi–Warack monogenetic volcanoes,Adamawa Plateau,Cameroon: petrography,mineralogy and geochemistry

Acta Geochimica - Three monogenetic cones in the Baossi–Warack area, Ngaoundéré, Adamawa Plateau forming part of the Cameroon Volcanic Line (CVL) are documented in this study....     

Forward kinematic modelling of a regional transect in the Northern Emirates using geological and apatite fission track age constraints on paleo-burial history

This paper aims to simulate the kinematic evolution of a regional transect crossing the Northern Emirates in the northernmost part of the Semail Ophiolite and the Dibba zone, just south of the Musandam Platform exposures. The studied section comprises, from top to bottom and from inner to outer zones, (1) the erosional remnants of the Semail Ophiolite, mainly made up of serpentinized ultramafics in the west and gabbros in the east, (2) high-grade metamorphic rocks which are currently exposed in the core of a nappe anticline near Masafi, (3) far-travelled Hawasina basinal units and Sumeini paleo-slope units of the Dibba Zone, (4) parautochthonous platform carbonates, which are currently well exposed in the Musandam area, and (5) a flexural basin filled with uppermost Cretaceous to Neogene sediments. Two main compressional episodes are generally identified, resulting first in the obduction of the Semail Ophiolite and then in the stacking of underlying platform carbonate units of the former Arabian passive margin, thus accounting for the present architecture of this transect: (1) first, deformation at the plate boundary initiated in the Late Cretaceous, resulting in the obduction of the Semail Ophiolite and the progressive accretion of the Hawasina and Sumeini tectonic wedge on top of the Arabian foreland, leading to a progressive bending of its lithosphere and development of a wide flexural basin; (2) compression resumed during the Neogene, leading to the tectonic stacking of the parautochthonous platform duplexes of Musandam and Margham trends, the development of out-of-sequence thrusts and triangle zones, refolding of the sole thrust of the former Late Cretaceous accretionary wedge and coeval normal (?) high-angle faulting along the contact between the Musandam and Dibba zones. However, seismic profiles and paleo-thermometers also help in identifying another erosional event at the boundary between the Paleogene Pabdeh and the Neogene Fars series. Evidenced by the local erosional truncation of the Pabdeh series in the vicinity of the frontal triangle zone (i.e. the inner part of the former Late Cretaceous foredeep), this Paleogene uplift/unroofing episode is tentatively interpreted here as an evidence for a continuum of compressional deformation lasting from the Late Cretaceous to the Middle Miocene although one may alternatively speculate that it was related to the detachment of the subducted slab. Although carbonate facies are usually not suitable for apatite fission track (AFT) studies, we were able to extract detrital apatites from quartz-bearing Triassic dolomites in the Musandam area. However, the yield and the quality were both poor and too few fission track lengths could be measured, making it difficult to interpret the meaning of the FT ages. The FT dates obtained in this study are therefore compared with those existing in the literature. Fortunately enough, for each sample, at least ten apatite crystals could be used for fission track dating, except for site 6 with only five datable apatite grains. The obtained apatite fission track dates between 28 and 13 Ma, much younger than the Triassic age of the series, are taken to represent reset fission track ages, implying erosion of an up-to-3-km-thick pile of Jurassic–Cretaceous carbonates and Hawasina allochthon during the Neogene. Apatite fission track dates from the ~95 M-old plagiogranites of the Semail complex (Searle and Cox, Geol Mag 139(3):241–255, 2002) obtained in this study and compared with those recently published provide evidences for more than one cooling event. An early unroofing of the ophiolite during the Late Cretaceous is revealed in fission track dates of 72–76 Ma at the top of the ophiolite in the east, which are coeval and also consistent with the occurrence of paleo-soils, rudists and paleo-reefs on top of serpentinized ultramafics in the west. High-pressure rocks at As Sifah in the southeast near Muscat revealed apatite fission track data ranging from ~46 to 63 Ma (Gray et al. 2006). The leucocratic part of the ophiolite (sample UAE 180) yielded comparable young apatite (40.6?±?3.9 Ma) and zircon (46.6?±?4.3 Ma) FT dates. A Cenozoic (~20–21 Ma) exhumation has been determined for the Bani Hamid metamorphic sole in northern Oman, applying low temperature geochronology and combining apatite FT and apatite (U–Th)/He analyses (Gray et al. 2006). In this study, young apatite fission track dates of 20 Ma have also been found but at the base of the ophiolite near Masafi, in the core of the nappe anticline, thus indicating a Neogene age for the refolding of the allochthon and stacking of underlying parautochthonous platform carbonate units. During the subsequent 2D forward Thrustpack kinematic modelling of the regional transect, these AFT data-set has been used, together with available subsurface information, to reconstruct the past architecture of the structural sections through time, accounting for incremental deformation along the various decollement levels, synorogenic sedimentation and erosion, as well as for successive bending and unbending episodes of the Arabian lithosphere.     

Timescales of convection in magma chambers below the Mid-Atlantic ridge from melt inclusions investigations

Closed hopper and complex swallowtail morphologies of olivine microcrysts have been described in the past in both mid-oceanic ridge basalts and subaerial tholeitic volcanoes and indicate fluctuations in magma undercooling. We describe similar morphologies in a Mid-Atlantic ridge pillow basalt (sample RD87DR10), and in addition we estimate the duration of temperature fluctuations required to produce these textures as follows: (1) Pairs of melt inclusions are arranged symmetrically around the centre of hopper crystals and each pair represents a heating–cooling cycle. Using the literature olivine growth rates relevant to the observed morphologies, and measuring the distance between two successive inclusions, we estimate the minimum time elapsed during one convection cycle. (2) The major element composition of melt inclusions (analysed by electron microprobe) was found to be in the range of the boundary layer measured in the glass surrounding the olivines, irrespective of their size. Several major elements demonstrate that this boundary layer results from rapid quenching on the seafloor, and not from crystal growth at depth, implying the inclusions had the same composition as the surrounding magma when they were sealed. Using diffusivity of slow diffusing elements such as Al₂O₃, we estimate the minimum time required for inclusion formation. These two independent approaches give concordant results: each cooling–heating cycle lasted between a few minutes and 1 h minimum. Thus, these crystals probably recorded thermal convection in small magmatic bodies (a dyke or shallow magma chamber) during the last hour or hours before eruption.     

The magnetic anisotropy of hematite bearing rocks

Summary The high field torque curves of hematite bearing rocks are not caused by directional differences in the energy of magnetization to saturation, but rather by the couple between the ferromagnetic moment and the applied field. An expression, derived for the high field torque curve of a single crystal of hematite, whose basal plane makes an arbitrary angle with the plane of rotation of the applied field, is found to be in excellent agreement with experiment. Furthermore it is shown that the Fourier spectrum of hematite bearing rocks should in general contain significant higher harmonics and that therefore the high field method is not particularly suitable for determining the preferred crystalline alignment of hematite bearing rocks.     

Deep crustal source of gneiss dome revealed by eclogite in migmatite (Montagne Noire,French Massif Central)

In orogens worldwide and throughout geologic time, large volumes of deep continental crust have been exhumed in domal structures. Extension-driven ascent of bodies of deep, hot crust is a very efficient mechanism for rapid heat and mass transfer from deep to shallow crustal levels and is therefore an important mechanism in the evolution of continents. The dominant rock type in exhumed domes is quartzofeldspathic gneiss (typically migmatitic) that does not record its former high-pressure (HP) conditions in its equilibrium mineral assemblage; rather, it records the conditions of emplacement and cooling in the mid/shallow crust. Mafic rocks included in gneiss may, however, contain a fragmentary record of a HP history, and are evidence that their host rocks were also deeply sourced. An excellent example of exhumed deep crust that retains a partial HP record is in the Montagne Noire dome, French Massif Central, which contains well-preserved eclogite (garnet+omphacite+rutile+quartz) in migmatite in two locations: one in the dome core and the other at the dome margin. Both eclogites record P ~ 1.5 ± 0.2 GPa at T  ~  700 ± 20°C, but differ from each other in whole-rock and mineral composition, deformation features (shape and crystallographic preferred orientation, CPO), extent of record of prograde metamorphism in garnet and zircon, and degree of preservation of inherited zircon. Rim ages of zircon in both eclogites overlap with the oldest crystallization ages of host gneiss at c. 310 Ma, interpreted based on zircon rare earth element abundance in eclogite zircon as the age of HP metamorphism. Dome-margin eclogite zircon retains a widespread record of protolith age (c. 470–450 Ma, the same as host gneiss protolith age), whereas dome-core eclogite zircon has more scarce preservation of inherited zircon. Possible explanations for differences in the two eclogites relate to differences in the protolith mafic magma composition and history and/or the duration of metamorphic heating and extent of interaction with aqueous fluid, affecting zircon crystallization. Differences in HP deformation fabrics may relate to the position of the eclogite facies rocks relative to zones of transpression and transtension at an early stage of dome development. Regardless of differences, both eclogites experienced HP metamorphism and deformation in the deep crust at c. 310 Ma and were exhumed by lithospheric extension—with their host migmatite—near the end of the Variscan orogeny. The deep crust in this region was rapidly exhumed from ~50 to <10 km, where it equilibrated under low-P/high-T conditions, leaving a sparse but compelling record of the deep origin of most of the crust now exposed in the dome.