Paléoenvironnements et caractérisation des roches mères pétrolières des séries pré-salifères du bassin intérieur du Gabon

The Interior Basin of Gabon, created during the break-up between South America and Africa, displays thick Neoproterozoic to Aptian p.p. fluvio-lacustrine deposits overlain by Aptian to Albian marine facies. Rock–Eval analyses from outcrop and drillhole samples show high content in organic matter (up to 25%) related to types I and II. These intervals are encountered within Permian, Neocomian–Barremian as well as Aptian siliciclastic succession. They constitute fairly good to excellent potential petroleum source rocks, which are most probably at the origin of oil indices recognized both in drillholes and in surface.     

Relations entre les données isotopiques océaniques et l'histoire des grandes faunes européennes plio-pleistocenes

This study is the first test of correlation between the results obtained on the large Plio-Pleistocene European faunas and the main climatic stages (cold as well as temperate) demonstrated in marine isotopic records. In particular, there are cold stages which often explain the disappearance of some species, as well as climatic events that promote the substitution of some species by other groups. A rather evident parallelism appears between the European succession of large faunal associations and paleoclimatic stages revealed in oceanic areas, but some discordance occurs in the later periods. Faced with the great diversification of the Quaternary faunas, probably due to the multiplicity of climatic environments, and with global information from oceanic records, only local biostratigraphic studies will allow precise reconstruction of the different biotopes.     

Stable isotope study of antimony deposits in the Muratdagi region,western Turkey

The Muratdagi region is rich in antimony deposits having the following common characteristics: post Miocene age, location on the down-thrown blocks next to normal faults, in the vicinity of active or fossil thermal springs, and in contact with carbonate rocks. The isotopic composition of — 7. SMOW of the mineralizing fluid calculated from the measured ° ¹⁸O of quartz and the fluid inclusion microthermometry, is indicative of meteoric water origin. The ° ¹³C of the inclusion CO₂ of — 19.1 to — 25.4 PDB is indicative of interaction with organic material-graphite. The ° ³⁴S of stibnite — 3.6 to — 0.7 is, in view of the mineral assemblage, indicative of magmatic origin of the sulphur. A tightly confined set of structural, lithological, hydrological and geochemical features define a sequence of geochemical processes; formation of acid and reducing fluid, leaching and transport of antimony complexes and precipitation of stibnite within defined lithological units. The set of processes seems to have taken place within a space of 5000 m lateral and 1000 m vertical extension.     

Depositional environment of a Kimmeridgian carbonate 'black band' (Akkuyu Formation, south-western Turkey)

The Upper Jurassic Akkuyu Formation of south-western Turkey consists of pale-coloured carbonate facies, but includes a peculiar ‘black band’ at its base. In order to characterize the depositional environment of this level, a sedimentological, organic and inorganic geochemical study was performed on 30 samples. Three units are distinguished. Unit 1 consists of black marlstones, very rich in organic carbon (22–30%) with HI (hydrogen index) values around 600. The organic matter is an amorphous homogeneous material even at nanoscopic scale. This unit is also characterized by a very high concentration of V ( >1000 p.p.m.) and a δ¹³C_org value around ?26·5‰. Unit 2 shows thin-bedded black limestones with chert layers. Its organic content varies from 2% to 6%. As in unit 1, the HI values are uniformly high (600), and gas chromatography shows a high quantity of hopanes. The V concentration is also high (≈400 p.p.m.). The unit has a high Sr/Ca ratio, an organic carbon isotopic ratio close to ?28·7‰ and diffuse, nanoscopically amorphous organic material that is closely associated with pyrite. Unit 3 corresponds to the white limestones overlying the ‘black band’. This calcitic facies is almost devoid of organic carbon (<0·1%). The δ¹³C_org values are similar to those of unit 1 (?25·5‰ to ?26‰). Deposition occurred in a basinal environment surrounded by a carbonate platform. Primary productivity was high but not exceptional; terrestrial organic inputs were scarce. Bottom waters were probably euxinic during the deposition of unit 1. The presence of both hopane-rich and sulphur-rich nanoscopically amorphous organic matter may be the result of strong sulphate-reducing bacterial activity. Coupled with low amounts of iron, this led to intense vulcanization of the organic matter and thus good preservation. With the onset of unit 2 deposition, environmental conditions became less extreme, perhaps because of cooler water temperatures. Finally, the depositional conditions became oxic, leading to the accumulation of pale-coloured organic-poor limestones of unit 3.     

Soil wettability in ground engineering: fundamentals,methods, and applications

Wettability is a fundamental property controlling the extent of wetting in flat and granular solids. In natural soils, wettability affects a wide variety of processes including infiltration, preferential flow and surface runoff. In mineral processing, wettability is paramount in enhancing the efficiency of separation of minerals from gangue. The manipulation of surface wettability is equally crucial in many industrial applications. For instance, superhydrophobic surfaces are those on which water drops roll off easily and as such are used for self-cleaning applications. Therefore, while wettability is strongly cross-disciplinary, its evolution has been discipline-specific with a direct extrapolation or transfer of concepts, approaches, and methods to ground engineering unlikely to remain valid. This paper synthesizes relevant aspects from surface chemistry, materials science, mining engineering, and soil science, and discusses their implications within the context of new granular materials that resist wetting, for use in barriers or ground improvement and, in unsaturated soils, where the effects of wettability have been documented.     

Aspects of sand behaviour by modified constant shear drained tests

Constant shear drained tests (CSD) are probably the most suitable to simulate the strength and deformation behaviour of soils in slopes under water infiltration conditions or lateral stress relief. This is significant because soil behaviour following a CSD stress path could differ from that of traditional compression triaxial tests. In this paper, CSD tests on sand following an alternative procedure are presented and discussed. The modified CSD tests were conducted by increasing the pore water pressure at a constant rate from one end of the specimen with water free to drain from the opposite end. Among the results from specimens consolidated at variable initial void ratios and principal stress ratios it was revealed that specimens showed a tendency to dilate even for loose sands; failure was reached at low axial strains; and a pre-failure type of instability could be identified. The modified procedure has the potential to provide new insights into the failure mechanisms of slopes under a water infiltration condition.     

Chromium speciation in oxide-type compounds: application to minerals,gems, aqueous solutions and silicate glasses

Cr K-edge XANES spectra were obtained for a variety of Cr-bearing model compounds containing Cr(II), Cr(III), Cr(IV), Cr(V) and Cr(VI), in which the Cr-site symmetry is D4h, Oh and Td. The centroid position of the pre-edge feature is a better indicator of the Cr valence than the edge position. In Cr-rich oxides, higher-energy transitions must be excluded in order to refine a robust valence for Cr. The pre-edge for chromates is not unique and varies as a function of the CrO₄ ^2? moiety distortion, which is often related to Cr-polymerization (monochromate vs. dichromate). Both the analogy with the Mn K-pre-edge information and ab initio FEFF calculations of the pre-edge feature for Cr(III) and Cr(VI) confirm the experimental trends. This methodology is applied to the Cr K-edge pre-edge feature collected in gems (emerald, spinel and ruby), the layered minerals fuchsite and kämmererite, two Cr-bearing aqueous solutions and a set of sodo-calcic silicate glasses used for bottling sparkling white wine. In emerald and fuchsite, the Cr-site is differently distorted than its ruby or spinel counterpart. In a Cr(III)-bearing aqueous solution and sodo-calcic glass, no evidence for Cr(III) with Td and C3v symmetry is detected. However, minor amounts of chromate moieties (most likely monomeric) are detected in a glass synthesized in air. Preliminary spectra for the wine bottle glass suggest that only trace amounts of chromates might possibly be present in these glasses.     

Neogyroporella? servaisi n. sp., nouvelle dasycladacee du Maastrichtien du Chiapas, sud-est du Mexique

Au Chiapas, sud-est du Mexique, la Formation Angostura d'âge Maastrichtien est riche en grands formanifères benthiques et en algues dasycladacées. Parmi celles-ci, nous avons reconnu une nouvelle forme, Neogyroporella? servaisi n. sp., qui se caractérise par un seul ordre de ramifications disposées en verticille et de type vésiculifère.In the State of Chiapas (SE Mexico), the Maastrichtian Angostura Formation is very rich in large benthic foraminifera and Dasycladaceae. We describe a new species. Neogyroporella? servaisi n. sp., which is characterized by having primary branches arranged in whorls of a vesicular type.     

Sedimentological and stratigraphic evolution of northern Lebanon since the Late Cretaceous: implications for the Levant margin and basin

This paper presents an updated review of the Upper Mesozoic and Cenozoic sedimentological and stratigraphic evolution of the Levant margin with a focus on the northern Lebanon. Facies and microfacies analysis of outcrop sections and onshore well cores (i.e., Kousba and Chekka) supported by nannofossil and planktonic foraminifers biostratigraphy, allowed to constrain the depositional environments prevailing in the Turonian to Late Miocene. The “Senonian” (a historical term used to define the Coniacian to Maastrichtian) source rock interval was subdivided into four sub-units with related outer-shelfal facies: (1) Upper Santonian, (2) Lower, (3) Upper Campanian, and (4) Lower Maastrichtian. This Upper Cretaceous rock unit marks the major drowning of the former Turonian rudist platform. This paper confirms the Late Lutetian to Late Burdigalian hiatus, which appears to be a direct consequence of major geodynamic events affecting the Levant region (i.e., the continued collision of Afro-Arabia with Eurasia), potentially enhanced by regressional cycles (e.g., Rupelian lowstand). The distribution of Late Burdigalian–Serravallian rhodalgal banks identified in northern Lebanon was controlled by pre-existing structures inherited from the pulsating onshore deformation. Reef barriers facies occur around the Qalhat anticline, separating an eastern, restricted back-reef setting from a western, coastal to open marine one. The acme of Mount Lebanon’s uplift and exposure is dated back to the Middle–Late Miocene; it led to important erosion of carbonates that were subsequently deposited in paleo-topographic lows. The Late Cretaceous to Cenozoic facies variations and hiatuses show that the northern Lebanon was in a higher structural position compared to the south since at least the Late Cretaceous.