Thermomechanical properties of deep argillaceous formations

A difficulty in the interpretation of mechanical and thermo-mechanical tests on specimens drawn from large argillaceous formations is the strong inhomogeneity of void ratio, clay minerals and carbonates content.

In this paper a relationship is developed to link strength and the maximum preconsolidation stress to the initial void ratio and carbonate content. Compressibility is also correlated to carbonates.

Thermal strains in drained and undrained conditions for a Spanish, a belgian and an Italian natural clay are compared. In the elastic state strains are comparable, while in the plastic range thermal strains are highest for the Belgian clay, lower in the Spanish cemented clay and lowest in the Italian clay, very stiff and cemented.     

Solar wind induction in Mercury: Constraints on the formation of a magnetosphere

The discovery of Mercury's magnetosphere by Mariner 10 was surprising since the conventional view of regenerative planetary dynamos had been that the spin requirement would likely have been in excess of the observed spin rate of Mercury. Also internal fluid motions were not expected to be sufficiently large. This paper explores the alternative model of the formation of Mercury's magnetosphere via electromagnetic induction forced by the solar wind. It is shown, however, that the constraints are so severe as to limit severely the applicability of such a model. Although induction is easily observed on the Moon, the modification of the magnetic boundary condition associated with a plasma magnetosphere on Mercury rules out its formation via induction except for interplanetary driving fields which are decreasing in amplitude. That model is explored but retains the difficulty that induced magnetospheres tend to be of small radial and temporal extent compared to that inferred by Ness et al. for Mercury.     

Evidence for downflow following a coronal transient?

On 11 September 1973 a peculiar prominence was observed. The prominence displayed strong ( 50km s^–1) systematic motions toward and away from the observer. The unusual spectrographic appearance of the prominence might have been due to downflowing material lifted into the corona during an earlier coronal transient.The National Center for Atmospheric Research is sponsored by the National Science Foundation.Operated by the Association of Universities for Research in Astronomy, Inc., under contract with the National Science Foundation.     

Observations of vertical ground accelerations exceeding gravity during the 1997 Umbria-Marche (central Italy) earthquakes

We found extensive evidence that the vertical ground accelerations produced during the largest shock (M = 6.0) of the 1997 Umbria-Marche earthquake sequence exceeded 1g in two areas close to the heavily-damaged villages of Annifo and Colle Croce. This evidence comes from the striking observation of thousands of freshly fractured and broken rocks and stones in these areas. Some of the broken stones lie isolated on soft detritic soil while others had been previously piled up, probably a long time agoto clear the fields for farming. The freshness of the cuts and fractures and the consistency of the observations for thousands of rocks and stones in these areas indicate that these rocks were thrown upwards during the earthquake, with breakage occurring at the time of impact. Ground motion calculations consistent with the static deformation inferred from GPS and interferometry data, show that the broken stones and rocks are found in the zone where the strongest shaking took place during the earthquake and that most of the shaking there was vertical.     

Ambient Changes in Tracer Concentrations from a Multilevel Monitoring System in Basalt

Starting in 2008, a 4‐year tracer study was conducted to evaluate ambient changes in groundwater concentrations of a 1,3,6‐naphthalene trisulfonate tracer that was added to drill water. Samples were collected under open borehole conditions and after installing a multilevel groundwater monitoring system completed with 11 discrete monitoring zones within dense and fractured basalt and sediment layers in the eastern Snake River aquifer. The study was done in cooperation with the U.S. Department of Energy to test whether ambient fracture flow conditions were sufficient to remove the effects of injected drill water prior to sample collection. Results from thief samples indicated that the tracer was present in minor concentrations 28 days after coring, but was not present 6 months after coring or 7 days after reaming the borehole. Results from sampling the multilevel monitoring system indicated that small concentrations of the tracer remained in 5 of 10 zones during some period after installation. All concentrations were several orders of magnitude lower than the initial concentrations in the drill water. The ports that had remnant concentrations of the tracer were either located near sediment layers or were located in dense basalt, which suggests limited groundwater flow near these ports. The ports completed in well‐fractured and vesicular basalt had no detectable concentrations.     

Petrogenesis of voluminous mid-Tertiary ignimbrites of the Sierra Madre Occidental,Chihuahua, Mexico

The mid-Tertiary ignimbrites of the Sierra Madre Occidental of western Mexico constitute the largest continuous rhyolitic province in the world. The rhyolites appear to represent part of a continental magmatic arc that was emplaced when an eastward-dipping subduction zone was located beneath western Mexico.In the Batopilas region of the northern Sierra Madre Occidental the mid-Tertiary Upper Volcanic sequence is composed predominantly of rhyolitic ignimbrites, but volumetrically minor lava flows as mafic as basaltic andesite are also present. The basaltic andesite to rhyolite series is calc-alkalic and contains 1% K₂O at 60% SiO₂. Trace element abundances of a typical ignimbrite with 73% SiO₂ are Sr 225 ppm, Rb 130 ppm, Y 32 ppm, Th 12 ppm, Zr 200 ppm, and Nb 15 ppm. The entire series plots as coherent and continuous trends on variation diagrams involving major and trace elements, and the trends are distinct from those of geographicallyassociated rocks of other suites. We interpret these and other geochemical variations to indicate that the rocks are comagmatic. Mineral chemistry, Sr isotopic data, and REE modelling support this interpretation.Least squares calculations show that the major element variations are consistent with formation of the basaltic andesite to rhyolite series by crystal fractionation of observed phenocryst phases in approximate modal proportions. In addition, calculations modelling the behavior of Sr with the incompatible trace element Th favor a fractional crystallization origin over a crustal anatexis origin for the rock series. The fractionating minerals included plagioclase (> 50%), and lesser amounts of Fe-Ti oxides, pyroxenes, and/or hornblende. The voluminous ignimbrites represent no more than 20% of the original mass of a mantle-derived mafic parental magma.     

A tertiary lamprophyre dike with high pressure xenoliths and megacrysts from Wiedemanns Fjord,East Greenland

Lamprophyric dikes, mainly of camptonite/monchiquite affinities occur in the Wiedemanns Fjord area. One example contains a complex assemblage of olivine-orthopyroxene-chrome spinel nodules, megacrysts of kaersutite, diopside, strongly reverse-zoned green salite and various spinel phases. Microprobe analyses are presented for all these phases and for the lilac-coloured titansalites and strongly-coloured kaersutites of the groundmass. It is concluded that these minerals record evolution under various P, T and oxidation regimes during the formation of a lamprophyric parent magma. The nodules provide evidence for deep fractures in this area supposedly associated with early rifting in the North Atlantic.     

Towards medium-term (order of months) morphodynamic modelling of the Teign estuary, UK

The main objective of this paper is to address the principal mechanisms involved in the medium-term (order of months to years) morphodynamic evolution of estuaries through the application of a process-based numerical modelling. The Teign estuary (Teignmouth, UK) is the selected site. The system is forced by the macrotidal semi-diurnal tide in the English Channel and is perturbed to a minor extent by high river discharge events (freshets). Although waves have a definite influence on the adjacent coastal area, Wells (Teignmouth Quay Development Environmental Statement: Changes to Physical Processes. Report R.984c:140. ABP Marine Environmental Research Ltd., Southampton, 2002b) suggested that swell waves do not enter the estuary. Hence, wave effects are neglected in this study, as only tides and the river discharge are taken into account. The sediment grain size is highly variable, but mainly sandy. Within the frame of the COAST3D project (), four bathymetric surveys of the adjacent coastal area were carried out at a nearly weekly intervals. The outer estuary and the adjacent coastal area were also surveyed every 6 months as part of the COASTVIEW project (). Based on these data and on continuously measured parameters, such as water level, waves, wind and river discharge, numerical modelling of the morphodynamic processes can be tested. To replicate the morphological changes in the medium-term within a feasible simulation time, forcing conditions are reduced through the use of an input reduction method (called ensemble technique). In this study, simulations are based on the coupling between Telemac-2D and its non-cohesive sediment transport module, Sisyphe (version 5.3 for both modules). Three different sediment transport formulae were tested: (1) Engelund and Hansen (A monograph on sediment transport in alluvial streams, 3rd edn. Technological University of Denmark, Copenhagen, 1967) including the modifications proposed by Chollet and Cunge (J Hydraul Eng 17(1):1–13, 1979); (2) Bijker (Mechanics of sediment transport by the combination of waves and current. In: Design and reliability of coastal structures. 23rd international conference on Coastal Engineering, pp 147–173, 1968) and (3) Soulsby (Dynamics of Marine Sands. A manual for practical applications. HR Wallingford, Wallingford, p 142, 1997) modified version of van Rijn [J Hydraul Eng 110(10):1431–1456, 1984a, J Hydraul Eng 110(11):1613–1641, 1984b] formulation. Both a qualitative (i.e. visual comparison) and a quantitative tool [Brier Skill Score (BSS); described in Sutherland et al. in Coast Eng 51:917–939, 2004b] are applied to assess the similarity of simulations when compared to model predictions and observations. Tests confirmed the reliability and time efficiency of the ensemble technique, since it reproduced very well the results of a reference run, a computation based on the observed boundary conditions. For the spring-neap cycle modelled, the BSS was of 0.91 (a perfect modelling would have a BSS of 1), with a reduction in the simulation time on the order of 80%. For the 6-month-period simulation, results were also excellent: BSS=0.92 and a computer time reduction of 85%. In principle, this method has the advantage of being applied to any process-based numerical model.     

Ice flow direction during late Paleozoic glaciation in western Paraná Basin, Brazil

The recent discovery of ice-striated surfaces associated with the late Paleozoic Aquidauana Formation suggests that glaciers coming from southwest Africa reached westernmost parts of the Paraná Basin in central Brazil. Abrasion features were developed by glaciers moving from SSE towards NNW, mainly on an unconsolidated bed. These records expand to about 1,050,000 km², the coverage of the late Paleozoic glaciation in the region of the Paraná Basin in Western Gondwana.

Resumen

A recente descoberta de superfícies estriadas associadas à Formação Aquidauana, de idade permocarbonífera, sugere que as geleiras provenientes do sudoeste da África alcançaram as porções ocidentais da Bacia do Paraná, na região central do Brasil. As feições de abrasão foram geradas pelo deslocamento de geleiras de SSE para NNW, principalmente sobre substrato inconsolidado. Estes novos registros evidenciam que a glaciação neopaleozóica cobriu uma área de pelo menos de 1.050.000 km² na região ocupada pela Bacia do Paraná no Gondwana Ocidental.