Terpenoid composition and origin of amber from the Cape York Peninsula,Australia

The terpenoid composition of fossil resin from the Cape York Peninsula, Australia has been analysed by pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) to determine its origin. The pyrolysis products were dominated by cadalene-based C₁₅ bicyclic sesquiterpenoids including some C₃₀–C₃₁ bicadinanes and bicadinenes typical of Class II resin derived from angiosperm plants of Dipterocarpaceae. This observation contrasts with the Araucariaceae (Agathis sp.) source previously suggested for the resin based on Fourier transform infrared (FTIR) analyses. Dipterocarpaceae are not known in Australian vegetation but grow abundantly in Southeast Asia including New Guinea, indicating that the geological origin of the amber is not the Australian mainland but could be traced to Southeast Asia.     

Structural features and mechanical behaviour of a pyroclastic weak rock

The results of an extensive programme of laboratory testing on intact and reconstituted samples of a pyroclastic weak rock from the volcanic complex of the Colli Albani (Central Italy) are presented. The deposit is known as Pozzolana Nera and may be assimilated to a bonded coarse grained material. The nature of bonds and the micro‐structural features were examined by means of diffractometry, optical and electron microscopy. As bonds are made of the same constituents of grains and aggregates of grains, bond deterioration and particles breakage upon loading are indistinguishable features of the mechanical behaviour. The testing programme consisted mainly of one‐dimensional and drained and undrained triaxial compression tests in a wide range of confining pressures up to 58 MPa. As confining stress increases, the mechanical behaviour of the material changes from brittle and dilatant to ductile and contractant; for both brittle and ductile behaviour failure is associated with the formation of shear surfaces separating the sample in several parts at the end of test. The experimental stress–dilatancy relationships are compared with the classical stress–dilatancy theories for a purely frictional material and for a material with friction and cohesion between particles. The analysis of the data indicates that peak strength results from the interplay between degradation of inter‐particle bonds, increasing friction between particles and increasing rate of dilation. Copyright © 2001 John Wiley & Son, Ltd.     

Development of a brownfield inventory for prioritizing funding outreach in Tucson,Arizona

Fear of liability from the 1980 Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA or Superfund) has prompted developers to build pre...     

Fe-rich Dunite Xenoliths from South African Kimberlites: Cumulates from Karoo Flood Basalts

Fe-rich dunite xenoliths within the Kimberley kimberlites compriseolivine neoblasts with minor elongated, parallel-oriented ilmenite,and rarely olivine porphyroclasts and spinel. Compared withtypical mantle peridotites, olivines in the Fe-rich duniteshave lower forsterite (Fo_87–89) and NiO contents (1300–2800ppm), which precludes a restitic origin for the dunites. Chrome-richspinels are remnants of a metasomatic reaction that producedilmenite and phlogopite. Trace element compositions differ betweenporphyroclastic and neoblastic olivine, the latter having higherTi, V, Cr and Ni and lower Zn, Zr and Nb contents, documentingtheir different origins. The dunites have high ¹⁸⁷Os/ ¹⁸⁸Osratios (0·11–0·15) that result in youngmodel ages for most samples, whereas three samples show isotopicmixtures between Phanerozoic neoblasts and ancient porphyroclasticmaterial. Most Fe-rich dunite xenoliths are interpreted to berecrystallized cumulates related to fractional crystallizationof Jurassic Karoo flood basalt magmatism, whereas the porphyroclastsare interpreted to be remnants from a much earlier (probablyArchaean Ventersdorp) magmatic episode. The calculated parentalmagma for the most primitive olivine neoblasts in the Fe-richdunites is similar to low-Ti Karoo basalts. Modelling the crystalfractionation of the inferred parental magma with pMELTS yieldselement fractionation trends that mirror the element variationof primitive low-Ti Karoo basalts. KEY WORDS: dunite xenoliths; fractional crystallization; Karoo; large igneous province; pMELTS; Re–Os; trace elements     

Effect of Sample Digestion,Air Filter Contamination,and Post‐adsorption on the Analysis of Trace Elements in Air Particulate Matter

Inductively coupled plasma atomic emission spectrometry and inductively coupled plasma MS are the major analytical tools for trace elements in environmental matrices, however, the underestimate of certain trace elements in analysis of air particulate matter by these two techniques has long been observed. This has been attributed to incomplete sample digestion. Here, we demonstrate that the combined effects of sample digestion, air filter impurities, and post‐adsorption of the analytes contribute to the interference of the analysis. Particular attention should be paid to post‐adsorption of analytes onto air filters after acid digestion.     

The rise and fall of the Irish orange roughy fishery: An economic analysis

An Irish commercial fishery for orange roughy began in the Northeast Atlantic in 2001 with the assistance of government grants. The fishery began as an open access, non-quota fishery. The rapid boom and bust of many deep water fisheries was experienced. Landings peaked in 2002 and then dropped significantly the following year. Many vessels were forced out of the fishery due to high costs and rapidly declining stocks. By 2005 the fishery was largely closed. Applying a bioeconomic analysis, this paper shows why the fishery no longer exists and discusses both the external and opportunity costs of the fishery. A bioeconomic model is applied to the available data to assess the open access effort and harvest with and without government grant aid. The results suggest that in the absence of subsidies, deep water trawling would not have been viable. In addition to the financial costs such as high fuel consumption, there are also externalities associated with deep water trawling. Orange roughy is closely associated with deep water ecosystems such as seamounts and cold water corals. This paper examines the costs of damage to cold water corals. These costs include the loss of fish habitats and lost future use and preservation values.     

Coupled silicon–oxygen isotope fractionation traces Archaean silicification

Silica alteration zones and cherts are a conspicuous feature of Archaean greenstone belts worldwide and provide evidence of extensive mobilisation of silica in the marine environment of the early Earth. In order to understand the process(es) of silicification we measured the silicon and oxygen isotope composition of sections of variably silicified basalts and overlying bedded cherts from the Theespruit, Hooggenoeg and Kromberg Formations of the Barberton Greenstone Belt, South Africa.The δ³⁰Si and δ¹⁸O values of bulk rock increase with increasing amount of silicification from unsilicified basalts (?0.64‰ < δ³⁰Si < ?0.01‰ and + 8.6‰ < δ¹⁸O < + 11.9‰) to silicified basalts (δ³⁰Si and δ¹⁸O values as high as + 0.81‰ and + 15.6‰, respectively). Cherts generally have positive isotope ratios (+ 0.21‰ < δ³⁰Si < + 1.05‰ and + 10.9 < δ¹⁸O < + 17.1), except two cherts, which have negative δ³⁰Si values, but high δ¹⁸O (up to + 19.5‰).The pronounced positive correlations between δ³⁰Si, δ¹⁸O and SiO₂ imply that the isotope variation is driven by the silicification process which coevally introduced both ¹⁸O and ³⁰Si into the basalts. The oxygen isotope variation in the basalts from about 8.6‰ to 15.6‰ is likely to represent temperature-dependent isotope fractionation during alteration. Our proposed model for the observed silicon isotope variation relies on a temperature-controlled basalt dissolution vs. silica deposition process.     

δ30Si and δ29Si Determinations on USGS BHVO-1 and BHVO-2 Reference Materials with a New Configuration on a Nu Plasma Multi-Collector ICP-MS

We report silicon isotopic determinations for USGS rock reference materials BHVO-1 and BHVO-2 using a Nu Plasma multi-collector (MC)-ICP-MS, upgraded with a new adjustable entrance slit, to obtain medium resolution, as well as a stronger primary pump and newly designed sampler and skimmer cones ("B" cones). These settings, combined with the use of collector slits, allowed a resolution to be reached that was sufficient to overcome the ¹⁴N¹⁶O and ¹⁴N₂ interferences overlying the ³⁰Si and the ²⁸Si peaks, respectively, in an earlier set-up. This enabled accurate measurement of both δ³⁰Si and δ²⁹Si. The δ value is expressed in per mil variation relative to the NBS 28 quartz reference material. Based on data acquired from numerous sessions spread over a period of six months, we propose a recommended average δ³⁰Si of −0.33 ± 0.05‰ and −0.29 ± 0.11‰ (2se) for BHVO-1 and BHVO-2, respectively. Our BHVO grand mean silicon isotope composition (δ³⁰Si =−0.31 ± 0.06‰) is significantly more negative than the only published value for BHVO-2, but is in very good agreement with the recently established average value of ocean island basalts (OIB), confirming the conclusion that the OIB reservoir has a distinct isotopic composition from the solar reservoir as sampled by chondrites.     

High-pressure synthesis of priderite and members of the lindsleyite-mathiasite and hawthorneite-yimengite series

Experiments investigating simplified members of the alkali-titanate mineral series priderite, lindsleyite-mathiasite (LIMA) and hawthorneite-yimengite (HAWYIM) confirm their stability at pressures between 3.5 and 5 GPa for priderite and LIMA, 4.3 and 5 GPa for HAWYIM at likely mantle solidus temperatures. Starting materials with K/Ba=1 resulted in solid-solutions for LIMA, whereas HAWYIM produced separate hawthorneite (K/Ba approx. 0.5) and nearly pure yimengite (K), indicating the existence of an asymmetric solvus for HAWYIM at high pressures. Priderite was examined with iron present as either Fe³⁺ or Fe²⁺; both are stable at 5 GPa, confirming the possible coexistence of priderite with diamond. X-ray powder diffraction data on end-members synthesized at high pressures and calculated reflection patterns improve the scope of diffraction data on these rare mantle minerals, with only small differences existing between the patterns for the synthetic minerals and those observed or expected for natural minerals.