Coastal-Fog Microphysics Using In-Situ Observations and GOES-R Retrievals

Boundary-Layer Meteorology - The objective of this work is to evaluate GOES-R (Geostationary Operational Environmental Satellites-R series) data-based fog conditions which occurred during the C-FOG...     

Effect of Roughness on Surface Boundary Conditions for Large-Eddy Simulation

An important parameterization in large-eddy simulations (LESs) of high- Reynolds-number boundary layers, such as the atmospheric boundary layer, is the specification of the surface boundary condition. Typical boundary conditions compute the fluctuating surface shear stress as a function of the resolved (filtered) velocity at the lowest grid points based on similarity theory. However, these approaches are questionable because they use instantaneous (filtered) variables, while similarity theory is only valid for mean quantities. Three of these formulations are implemented in simulations of a neutral atmospheric boundary layer with different aerodynamic surface roughness. Our results show unrealistic influence of surface roughness on the mean profile, variance and spectra of the resolved velocity near the ground, in contradiction of similarity theory. In addition to similarity-based surface boundary conditions, a recent model developed from an a priori experimental study is tested and it is shown to yield more realistic independence of the results to changes in surface roughness. The optimum value of the model parameter found in our simulations matches well the value reported in the a priori wind-tunnel study.     

PGE distribution in massive sulfide deposits of the Iberian Pyrite Belt

We present the first platinum group elements (PGE) data on seven massive sulfide deposits in the Iberian Pyrite Belt (IPB), one of the world largest massive sulfide provinces. Some of these deposits can contain significant PGE values. The highest PGE values were identified in the Cu-rich stockwork ores of the Aguas Teñidas Este (Σ PGE 350 ppb) and the Neves Corvo (Σ PGE 203 ppb) deposits. Chondrite normalized PGE patterns and Pd/Pt and Pd/Ir ratios in the IPB massive, and stockwork ores are consistent with the leaching of the PGE from the underlying rock sequence.     

Petrogenesis of highly depleted peridotites and gabbroic rocks from the Mayarí-Baracoa Ophiolitic Belt (eastern Cuba)

The Moa-Baracoa and Mayarí-Cristal massifs (eastern Cuba) are two ophiolitic complexes mainly constituted by harzburgite tectonites and minor dunites, cut by gabbroic dykes. The Moa-Baracoa massif exhibits a well developed Moho transition zone and an incomplete crustal section made up of layered gabbros and tectonically emplaced pillow basalts. A plutonic crustal section is absent in the Mayarí-Cristal massif and mantle tectonites are in tectonic contact with arc-related volcanic rocks. Mantle peridotites are very refractory in terms of modal composition, whole rock major element and HREE contents implying that Moa-Baracoa and Mayarí-Cristal harzburgites are residues after high degrees (20–30%) of partial melting. The relative enrichment of Th, Nb, Ta and LREE in peridotites is due to re-equilibration of melting residues with percolating melts. Peridotites lost on average 6 wt% of relative MgO by intense seafloor weathering. REE contents and Mg# of melts in equilibrium with cumulate gabbros from the Moho transition zone and crustal section of the Moa-Baracoa massif coincide with those of the spatially-related pillow basalts. On the other hand, no geochemical relation has been inferred between melt in equilibrium with Mayarí-Cristal segregate and the spatially-related arc volcanics. Our results indicate that the Mayarí-Baracoa Ophiolitic Belt formed at an original back-arc spreading centre. The Moa-Baracoa massif represents a portion of MORB-like lithosphere located nearby a back-arc mid-ocean spreading ridge, and the Mayarí-Cristal massif represents a piece of transitional (MORB to IAT) mantle located closer to the paleo-volcanic arc than Moa-Baracoa.     

Influence of a permanent low-friction boundary on rotation and flow in rigid inclusion/viscous matrix systems from an analogue perspective

Natural occurrences and recent experimental work show that a low-friction inclusion/matrix boundary can be responsible for antithetical rotation and development of stable shape preferred orientations in simple shear. The flow of a viscous matrix around a rigid inclusion to which it may or may not be adherent is still not well studied, but it is relevant to the understanding of the behaviour of structural elements in mylonite zones. We used two-dimensional (2-D) analogue experiments to address these issues. The experimental results with a permanent low-friction inclusion/matrix boundary (nonadherent mode) show the following. (1) The rotation behaviour of inclusions in this mode is markedly different from the theoretical predictions and experimental results for the adherent mode. (2) Inclusions with aspect ratio equal to 1 rotate synthetically at a rate that depends upon inclusion shape and orientation. (3) Ellipse-, rectangle- and lozenge-shaped inclusions rotate antithetically when starting with their greatest axis parallel to the shear direction. (4) Back rotation is limited in all cases studied, and the angle between the inclusion greatest axis and the shear direction represents a stable orientation, which depends on inclusion aspect ratio and shape. (5) A metastable orientation exists, which is strongly dependent upon inclusion shape and aspect ratio, and separates fields of antithetic and synthetic rotation.Our experimental results show that the overall flow pattern is bow tie-shaped in adherent and nonadherent modes. However, there are major differences in the way the matrix flows near the inclusion. (i) In the nonadherent mode, the nearby matrix flows past the inclusion, whereas in the adherent mode, the nearby matrix flows with and follows the inclusion. Therefore, in the adherent mode, passive marker lines parallel to the shear direction and streamlines show considerable deflections at the inclusion crests, in marked contrast with their straight character in the nonadherent mode. (ii) Stagnation points or closed flow lines near the inclusion were not observed in the nonadherent mode, which means that there is no closed separatrix around the inclusion in this mode, despite the fact that the overall flow shape is bow tie. (iii) In the adherent mode, the line of flow reversal is stable throughout deformation, but in the nonadherent mode, it changes position and orientation with progressive shearing. This shifting of the line of flow reversal can be an important factor controlling rotation behaviour in the nonadherent mode. (iv) In the nonadherent mode, the inclusion behaviour is similar to that observed in confined flow. (v) The flow pattern in the nonadherent mode provides an explanation for the observed lack of drag folds associated with small-scale rigid inclusions in mylonites.     

Flood Events of Selected European Rivers in the Sixteenth Century

The severity and frequency of sixteenth-century floods of the Rhine, the Main, the middle and upper Elbe with its tributaries, rivers of northern and central Italy, the Garonne and rivers in Catalonia and Andalusia are analyzed using documentary evidence. The basic topographical and hydrological characteristics of the rivers investigated as well as the synoptic causes of their flooding during the instrumental period are presented. Different examples of modifications of the run-off process due to anthropogenic activity are discussed. Prevalence in flood occurrence during the second half of the sixteenth century in comparison to the first half is typical for central European and Andalusian rivers (mainly in the 1560s and 1590s) and agrees with the evolution of precipitation patterns. On the other hand, Italian and Catalonian rivers, in part, had a higher occurrence of floods during the first half of the century. Changes in the flooding seasons in both halves of the century are not unambiguous. Results of an analysis on a broader European scale show floods to be a random natural phenomena with limited areal extent defined by the spatial influence of forcing meteorological factors (continuous heavy rains, sudden melting of thick snow cover, etc.). Despite some limitations of documentary evidence, series of reconstructed historical floods are valuable sources of proxy data which can be utilized for the study of the flooding fluctuations in the pre-instrumental period.     

Empirical seismic fragility models for Nepalese school buildings

Natural Hazards - Empirical vulnerability models are fundamental tools to assess the impact of future earthquakes on urban settlements and communities. Generally, they consist of sets of fragility...     

A Modeling Approach to Assess the Key Factors in the Evolution of Coastal Systems: the Ebro North Hemidelta Case

One-Line shoreline evolution models have been used as a tool to understand and forecast long-term coastal evolution. However, in some coastal environments, where the influence of the wind is important, the limitations of existing models preclude its direct application to characterize its effect on sediment transport processes. To fill this knowledge gap, we have developed a shoreline evolution model that includes the effect of wind on longshore sediment transport and accounts for beach-dune sedimentary exchange due to aeolian transport. The model produces quantitative estimates of sediment transport and exchanges rates alongshore, easing the assessment of the role of different forcing agents in coastline evolution. The model was applied to the Ebro north hemidelta coast. The results are used to discuss the relative importance of the wind interaction in the evolution of different coastline stretches. Aeolian sand transport at Riumar Beach could cause coastal erosion. At the rectilinear coast, aeolian exchange does not seem to influence the shoreline evolution but the wind-current interaction does. The model provides valuable data when considering the approach to be taken regarding conservation measures. Alongshore aeolian sediment transport can be useful when designing and placing aeolian sediment traps. Conservation of the Ebro north hemidelta coast needs to focus on increasing the river sediment supply. The application herein presented can be regarded as a first step in understanding wave and wind coupling effects in shoreline evolution.