Late Eocene marginal marine deposits and paleoenvironment characterisation from the Maadi Formation (Northern Eastern Egypt)

Two beds containing relatively thick and highly concentrated oyster shell banks occurring in the densely fossiliferous Wadi Al Abraq outcrop (Upper Eocene Maadi Formation, Cairo-Sukhna Road, Egypt). Such shell beds are almost monospecific. The upper level consists mainly of Ostrea clotbeyi Bellardi, topped by a considerable concentration of Carolia placunoides Cantraine, while in the lower level occurs Ostrea multicostata Deshayes. In both beds, the upper contact with the overlying marl bed (about 2 m thick) is sharp and sometimes erosive. Similarly, the contact with the underlying shale (1.5 m thick) is sharp and erosional. The shell beds are composed mainly of loosely packed oyster shells and their fragments (usually with a high proportion of disarticulated specimens) set in the sandy limestone matrix. The collected oysters show bioerosion and skeletobiont assemblages. Bioerosion trace fossils comprise ten ichnospecies while skeletozoans comprise five taxa. In general, shells of O. clotbeyi show a higher incidence of bioerosion than O. multicostata. The shells' chaotic orientation and their moderate fragmentation indicate that the shell bed formation was associated with high energy events. On the other hand, the low frequency of articulated specimens suggests that the shell beds are parautochthonous oyster banks' remnants. The taphonomic features of the studied assemblage indicate deposition in a shallow-water, wave-dominated environment.     

Gravity and magnetic data inversion for 3D topography of the Moho discontinuity in the northern Red Sea area, Egypt

The main goal of our study is to investigate 3D topography of the Moho boundary for the area of the northern Red Sea including Gulf of Suez and Gulf of Aqaba. For potential field data inversion we apply a new method of local corrections. The method is efficient and does not require trial-and-error forward modeling. To separate sources of gravity and magnetic field in depth, a method is suggested, based on upward and downward continuation. Both new methods are applied to isolate the contribution of the Moho interface to the total field and to find its 3D topography. At the first stage, we separate near-surface and deeper sources. According to the obtained field of shallow sources a model of the horizontal layer above the depth of 7 km is suggested, which includes a density interface between light sediments and crystalline basement. Its depressions and uplifts correspond to known geological structures. At the next stage, we isolate the effect of very deep sources (below 100 km) and sources outside the area of investigation. After subtracting this field from the total effect of deeper sources, we obtain the contribution of the Moho interface. We make inversion separately for the area of rifts (Red Sea, Gulf of Suez and Gulf of Aqaba) and for the rest of the area. In the rift area we look for the upper boundary of low-density, heated anomalous upper mantle. In the rest of the area the field is satisfied by means of topography for the interface between lower crust and normal upper mantle. Both algorithms are applied also to the magnetic field. The magnetic model of the Moho boundary is in agreement with the gravitational one.     

Divisional morphogenesis in the marine ciliate Anteholosticha manca (Kahl, 1932) Berger, 2003 (Ciliophora: Urostylida)

The cortical development and macronuclear evolution of the marine hypotrichous ciliate Anteholosticha manca, collected from the coastal waters near Qingdao, China, were investigated using the protargol impregnation method. The morphogenesis of A. manca is generally typical for the genus, and can be characterized as the following features ： （ 1 ） in the proter, a new oral primordium is formed on the bottom （beneath the pellicle） of the buccal cavity, disorganization of the parental undulating membranes do not contribute to the formation of this primordium ; （2） FVT-cirral anlagen in both dividers develop independently, and very likely only a few midventral cirri join in the formation of these primordia; （ 3 ） both marginal row and dorsal kinety anlagen develop intrakinetally within the parental structure; （4） at the middle stage, macronuclear segments fuse together to form a single mass as observed in most of its related forms.     

Impact of Lithofacies and Structures on the Hydrogeochemistry of the Lower Miocene Aquifer at Moghra Oasis,North Western Desert,Egypt

Natural Resources Research - The Moghra Oasis is one of the major Egyptian desert-reclamation projects. Understanding the hydrochemistry of the Moghra aquifer is an onus to properly plan and manage...     

Geochemical constraints on the provenance of Oligocene–Miocene siliciclastic deposits (Zivah Formation) of NW Iran: implications for the tectonic evolution of the Caucasus

In this study, the whole-rock geochemistry of 35 Oligocene–Miocene sandstone and shale samples from the Zivah Formation, Moghan area (NW Iran) were collected and analyzed for evaluation of their provenance, tectonic setting and the intensity of paleo-weathering. Low to moderate values of the chemical index of alteration (mean CIA?=?53/68 for sandstones/shales) and relatively high values of index of compositional variability (mean ICV?=?1.23/1.08 for sandstones/shales) suggest weak chemical weathering and an immature source. These results support for the semi-arid and semi-humid paleoclimate conditions in the source area. The geochemistry results reveal that the sediments were deposited in a basin related to the island arc and active continental margin tectonic settings, probably indicating the time of initial collision between Arabia and Eurasia. The enrichment of Cr, Ni and V in the sandstone and shales are consistent with mafic input from the source area. However, La/Th vs. Hf and La/Sc vs. Co/Th plots reveal mixed source of felsic and intermediate volcanic rocks. The data indicate that the sediments most likely originated from a mixture of mafic, intermediate and felsic igneous source areas, possibly as the erosional products of localized topography of the Talysh and the Lesser Caucasus mountains (south to southwest), created by compression in the Moghan region during the syn-collisional development of the Caucasus.     

Characterization of complex fluvial systems using remote sensing of spatial and temporal water level variations in the Amazon,Congo, and Brahmaputra Rivers

The Surface Water and Ocean Topography (SWOT) satellite mission will provide global, space‐based estimates of water elevation, its temporal change, and its spatial slope in fluvial environments, as well as across lakes, reservoirs, wetlands, and floodplains. This paper illustrates the utility of existing remote sensing measurements of water temporal changes and spatial slope to characterize two complex fluvial environments. First, repeat‐pass interferometric SAR measurements from the Japanese Earth Resources Satellite are used to compare and contrast floodplain processes in the Amazon and Congo River basins. Measurements of temporal water level changes over the two areas reveal clearly different hydraulic processes at work. The Amazon is highly interconnected by floodplain channels, resulting in complex flow patterns. In contrast, the Congo does not show similar floodplain channels and the flow patterns are not well defined and have diffuse boundaries. During inundation, the Amazon floodplain often shows sharp hydraulic changes across floodplain channels. The Congo, however, does not show similar sharp changes during either infilling or evacuation. Second, Shuttle Radar Topography Mission measurements of water elevation are used to derive water slope over the braided Brahmaputra river system. In combination with in situ bathymetry measurements, water elevation and slope allow one to calculate discharge estimates within 2.3% accuracy. These two studies illustrate the utility of satellite‐based measurements of water elevation for characterizing complex fluvial environments, and highlight the potential of SWOT measurements for fluvial hydrology. Copyright © 2010 John Wiley & Sons, Ltd.     

Compositional characteristics and geodynamic significance of late Miocene volcanic rocks associated with the Chah Zard epithermal gold–silver deposit,southwest Yazd,Iran

Whole‐rock geochemical and Sr–Nd isotopic data are presented for late Miocene volcanic rocks associated with the Chah Zard epithermal Au–Ag deposit in the Urumieh‐Dokhtar Magmatic Arc (UDMA), Iran, to investigate the magma source, petrogenesis and the geodynamic evolution of the study area. The Chah Zard andesitic to rhyolitic volcanic rocks are characterized by significant Large Ion Lithophile Element (LILE) and Light Rare Earth Element (LREE) enrichment coupled with High Field Strength Element (HFSE) depletion. Our geochemical data indicate an adakitic‐like signature for the volcanic rocks (e.g. SiO₂ > 62 wt%, Al₂O₃ > 15 wt%, MgO < 1.5 wt%, Sr/Y > 70, La/Yb > 35, Yb < 1 ppm, and Y < 18 ppm, and no significant Eu anomalies), distinguishing them from the other volcanic rocks of the UDMA. The Chah Zard volcanic rocks have similar Sr and Nd isotopic compositions; the ⁸⁷Sr/⁸⁶Sr(i) ratios range from 0.704 902 to 0.705 093 and the ε_Nd(i) values are from +2.33 to +2.70. However, the rhyolite porphyry represents the final stage of magmatism in the area and has a relatively high ⁸⁷Sr/⁸⁶Sr ratio (0.705 811). Our data suggest that the andesitic magmas are from a heterogeneous source and likely to result from partial melting of a metasomatized mantle wedge associated with a mixture of subducted oceanic crust and sediment. These melts subsequently underwent fractional crystallization along with minor amounts of crustal assimilation. Our study is consistent with the model that the volcanic host rocks to epithermal gold mineralization in the UDMA are genetically related to late Miocene Neo‐Tethyan slab break‐off beneath Central Iran.     

Use of Geophysical and Remote Sensing Data for Assessment of Aquifer Depletion and Related Land Deformation

An integrated approach [field, Interferometric Synthetic Aperture Radar (InSAR), hydrogeology, geodesy, and spatial analysis] was adopted to identify the nature, intensity, and spatial distribution of deformational features (sinkholes, fissures, differential settling) reported over fossil aquifers in arid lands, their controlling factors, and possible remedies. The Lower Mega Aquifer System (area 2 × 10⁶ km²) in central and northern Arabia was used as a test site. Findings suggest that excessive groundwater extraction from the fossil aquifer is the main cause of deformation: (1) deformational features correlated spatially and/or temporally with increased agricultural development and groundwater extraction, and with a decline in water levels and groundwater storage (? 3.7 ± 0.6 km³/year); (2) earthquake events (years 1985–2016; magnitude 1–5) are largely (65% of reported earthquakes) shallow (1–5 km) and increased from 1 event/year in the early 1980s (extraction 1 km³/year), up to 13 events/year in the 1990s (average annual extraction > 6.4 km³). Results indicate that faults played a role in localizing deformation given that deformational sites and InSAR-based high subsidence rates (? 4 to ? 15 mm/year) were largely found within, but not outside of, NW–SE-trending grabens bound by the Kahf fault system. Findings from the analysis of Gravity Recovery and Climate Experiment solutions indicate that sustainable extraction could be attained if groundwater extraction was reduced by 3.5–4 km³/year. This study provides replicable and cost-effective methodologies for optimum utilization of fossil aquifers and for minimizing deformation associated with their use.