Comparisons of Snowfall Measurements in Complex Terrain Made During the 2010 Winter Olympics in Vancouver

Solid precipitation (SP) intensity ( $ R_{\text{s}} $ ) using four automatic gauges, Pluvio, PARSIVEL (PArticle, SIze and VELocity), FD12P and POSS, and radar reflectivity factor ( $ Z $ ) using the POSS and PARSIVEL were measured at a naturally sheltered station (VOA) located at high level (1,640 m) on the Whistler Mountain in British Colombia, Canada. The R _s and other standard meteorological parameters were collected from March 2009, and from November 2009, to February 2010. The wind speed (ws) measured during this period ranged from 0 to 4.5 ms^?1, with a mean value of 0.5 ms^?1. The temperature varied from 4 to ?17 °C. The SP amount reported by the PARSIVEL was higher than that reported by the Pluvio by more than a factor of 2, while the FD12P and POSS measured relatively smaller amounts, but much closer to that reported by the Pluvio and manual measurements. The dependence of R _s from the PARSIVEL on wind speed was examined, but no significant dependence was found. The PARSIVEL’s precipitation retrieval algorithm was modified and tested using three different snow density size relationships (ρ _s–D) reported in literature. It was found that after modification of the algorithm, the derived R _s amounts using the raw data agreed reasonably well with the Pluvio. Statistical analysis shows that more than 95 % of $ Z_{{h_{\text{poss}} }} $ data measured by POSS appears to correlates well with the reflectivity factors determined using the three ρ _s–D relationships. The automated Pluvio accumulation and manually determined daily SP amount (SPm) measured during five winter months were compared. The mean ratio (MR) and the mean difference (MD), and the correlation coefficient (r) calculated using the data collected using the two methods, were found to be 0.96, 0.4 and 0.6 respectively, indicating respectable agreement between these two methods, with only the Pluvio underestimating the amount by about 4 %.     

Biotransformation potential of hexavalent chromium by Bacillus pumilus-S4, Pseudomonas doudoroffii-S5 and Exiguobacterium-S8 in association with hydrophytes

Three chromium-resistant bacteria Bacillus pumilus-S4, Pseudomonas doudoroffii-S5 and Exiguobacterium-S8 were isolated from chromium-contaminated wastewater/soil and could resist very high concentrations of potassium chromate in Luria agar (up to 25 mg ml^?1) and acetate minimal medium (2 mg ml^?1). The strains showed growth at diverse pH and temperatures and could resist multiple heavy metals. Pseudomonas doudoroffii-S5 reduced (8.27 mg hexavalent chromium 24 h^?1) at a lower initial potassium chromate concentration (100 μg ml^?1), but overall more chromate (28.4 mg hexavalent chromium 24 h^?1) was reduced at a higher initial concentration (1,000 μg ml^?1). The addition of various heavy metals (zinc sulphate, copper sulphate, and manganese sulphate at 50 μg ml^?1) in the chromium reduction media did not significantly affect the hexavalent chromium reduction potential of these isolates. The chromium removal/detoxification potential of these strains increased when used in conjunction with hydrophytes Eichornia crassipes and Pistia stratiotes. Interestingly, the whole process runs automatically with less energy input, that is, the bacterial strains support the growth of plant while in turn the plant releases exudates that help bacterial growth.     

Seismic hazard assessment and rheological implications: a case study selected for cities of Saudi Arabia along the eastern coast of Red Sea

A probabilistic approach is used to evaluate the seismic hazard for 12 strategic cities in Saudi Arabia along the eastern coast of Red Sea. The focal depth variations controlled by rheological characteristics are taken into account for hazard calculations, and its creditability is tested through sensitivity analysis for hazard results. This study presents a neo-probabilistic seismic hazard assessment methodology in which the focal depth distribution of earthquakes within seismogenic layer is divided into three depth slices. These depth slices are based upon rheological characteristic of seismogenic layer. The hazard results are obtained using this depth-slice methodology and conventional approach in which uniform distribution of seismicity within seismogenic layer is assumed. The sensitivity analysis culminated in underestimation of hazard values in higher frequencies for uniform distribution of seismicity within seismogenic layer. Foregoing the observations recorded above, it can be concluded that the exploitation of depth-slices biased by the rheology to calculate hazard is relatively preferable in the situations demanding safety measures.     

Socio-economic determinants of women’s livelihood time use in rural Bangladesh

Achieving gender well-being and equality is one of the 17 Sustainable Development Goals of the United Nations. A close examination of female livelihood time allocation can reveal gender inequality in livelihood choices between males and females. Using the feminist political ecology framework, this paper examines how gendered knowledge, roles, and responsibilities influence female livelihood time use in a patriarchal society like Bangladesh. We use a nationally representative household survey data to create Multiple Linear Regression Model to understand the association between economic, cultural, and environmental shocks with the total time allocation toward livelihood activities by women. Our results suggest that use of ‘Purdah’ by Muslim women acts as a negative detrimental factor towards their livelihood time allocation, thus affirming the complex role of culture and gendered economic activities. Women also allocate less time toward livelihood activities during pregnancy and/or breastfeeding. We find that female livelihood time use also depends on their ability to speak in public, their autonomy in livelihood decision processes, and their ownership in business enterprises. This research suggests creating more robust and gender sensitive policies in Bangladesh that can help achieve the United Nation’s goals of Sustainable Development.

     

Flash flood inundation map preparation for wadis in arid regions

Flood inundation maps are dependent on the topographic and geomorphologic features of a wadi (drainage basin) in arid regions, which are most susceptible for potential flash flood occurrences, such as in the southwestern part of the Kingdom of Saudi Arabia. It is not possible to control the potential flood hazards by using only technological instruments that forewarn the occurrences or imminence. Additionally, it would be better to prepare flood risk maps so as to delineate the risky areas to educate the administrators and local settlers. The availability of these maps is the key requirement for any urban development that entails land use allocation, identification of dam, tunnel, highway, bridge sites, and infrastructure locations for sustainable future. This paper suggests the necessary steps in flood inundation map preparation after determining the possible flood discharge. For this purpose, a set of critical cross-sections along the possible flood plain are taken in the field with surveying methods and measurements. The calculation of the average flow velocity in each section is calculated according to the cross-section geometric, hydraulic, and material properties. Synthetic rating curves (SRC) are prepared for each cross section, which are very useful especially in arid and semi-arid regions where there are no perennial surface water flows for natural rating curve measurements. All the SRCs appear in the form of power function which relates the flow depth to discharge in a given cross section. It is then possible to calculate the flood depth in the cross section through its SRC. Depending on the cross-section shape, the flood width can be calculated. The connection of a series of widths on a scaled topographic map delineates the flood inundation area. If digital elevation map (DEM) is available, then the SRCs can be integrated with these maps and the flood inundation delineation can be achieved automatically. Since DEMs are not available, the topographic maps are used for this purpose in order to delineate flood inundation areas within wadis Hali and Yiba from the southwestern Kingdom of Saudi Arabia.     

Group velocity dispersion analysis in northern Peninsular Malaysia

The crustal structure beneath three seismic stations over Malaysia has been investigated with the application of the group velocity dispersion analysis of the northern Sumatra earthquake data which occurred on 06 April 2010. Eighteen crustal layer models are constructed to assess the structure. Group velocity dispersions have been computed for the recorded earthquake data using a graphical method and modified Haskell matrix method for the models. Both dispersions have been presented for the interpretation of crustal layers. Findings have shown four major crustal layers having thicknesses of 2.5–4.0, 2.0–5.5, 5.0–8.0, and 8.5–9.0 km, while in Terengganu, it has shown three layers. Density, shear, and compressional wave velocities used in models have suggested that the crustal structure of the northern part of Peninsular Malaysia is crystalline. Major crustal minerals are of quartz, plagioclase, and mica. Most layers seem to have upward directions toward Perak from Kedah and Terengganu.     

Mesozoic to Cenozoic tectono‐metamorphic history of the South Pamir–Hindu Kush (Chitral,NW Pakistan): Insights from phase equilibria modelling,and garnet–monazite petrochronology

The Karakoram–Hindu Kush–Pamir and adjacent Tibetan plateau belt comprise a series of Gondwana‐derived crustal fragments that successively accreted to the Eurasian margin in the Mesozoic as the result of the progressive Tethys ocean closure. These domains provide unique insights into the thermal and structural history of the Mesozoic to Cenozoic Eurasian plate margin, which are critical to inform the initial boundary conditions (e.g. crustal thickness, structure and thermo‐mechanical properties) for the subsequent development of the large and hot Tibetan–Himalaya orogen, and the associated crustal deformation processes. Using a combination of microstructural analyses, thermobarometry modelling and U–Th–Pb monazite and Lu–Hf garnet geochronology, the study reappraises the metamorphic history of exposed mid‐crustal metapelites in the Chitral region of the South Pamir–Hindu Kush (NW Pakistan). This study also demonstrates that trace elements in monazite (especially Y and Dy), combined with thermodynamical modelling and Lu–Hf garnet dating, provides a powerful integrated toolbox for constraining long‐lived and polyphased tectono‐metamorphic histories in all their spatial and temporal complexity. Rocks from the Chitral region were progressively deformed and metamorphosed at sub‐ and supra‐solidus conditions through at least four distinct episodes from the Mesozoic to the Cenozoic. Rocks were first metamorphosed at ~400–500°C and ~0.3 GPa in the Late Triassic–Early Jurassic (210–185 Ma), likely in response to the accretion of the Karakoram during the Cimmerian orogeny. Pressure and temperature subsequently increased by ~0.3 GPa and 100°C in the Early‐ to Mid Cretaceous (140–80 Ma), coinciding with the intrusion of calcalkaline granitic plutons across the Karakoram and Pamir regions. This event is interpreted as the record of crustal thickening and the development of a proto‐plateau within the Eurasian margin due to a long‐lived episode of slab flattening in an Andean‐type margin. Peak metamorphism was reached in the Late Eocene–Early Oligocene (40–30 Ma) at conditions of 580–600°C and ~0.6 GPa and 700–750°C and 0.7–0.8 GPa for the investigated staurolite schists and sillimanite migmatites respectively. This crustal heating up to moderate anatexis likely resulted in the underthrusting of the Indian plate after a NeoTethyan slab‐break off or to the Tethyan Himalaya–Lhasa microcontinent collision and subsequent oceanic slab flattening. Near‐isothermal decompression/exhumation followed in the Late Oligocene (28–23 Ma) as marked by a pressure decrease in excess of ~0.1 GPa. This event was coeval with the intrusion of the 24 Ma Garam Chasma leucogranite. This rapid exhumation is interpreted to be related to the reactivation of the South Pamir–Karakoram suture zone during the ongoing collision with India. The findings of this study confirm that significant crustal shortening and thickening of the south Eurasian margin occurred during the Mesozoic in an accretionary‐type tectonic setting through successive episodes of terrane accretions and probably slab flattening, transiently increasing the coupling at the plate interface. Moreover, they indicate that the south Eurasian margin was already hot and thickened prior to Cenozoic collision with India, which has important implications for orogen‐scale strain‐accommodation mechanisms.     

Numerical simulation of fabric anisotropy and strain localization of sand under simple shear

This paper studies the effects of initial fabric anisotropy of dry sand in simple shear deformation. The effects of anisotropy are taken into consideration through the modification of the mobilized friction in the Mohr–Coulomb‐type yield surface as a function of a fabric parameter. In addition, the constitutive model uses a gradient term that directly incorporates the effects of material length scale. The constitutive formulation is implemented into ABAQUS finite element code and used to simulate shearing of the dry sand under various conditions of simple shear. The numerical simulations show that while the shear stress response is affected by fabric anisotropy, its effects on strain localization in simple shear are minimal. This is in contrast to other devices such as the biaxial shear. The strain localization in simple shear is controlled more by the imposed boundary conditions. The use of material length scale is shown to remove the effects of strain localization in the shearing response. Copyright © 2009 John Wiley & Sons, Ltd.     

Drainage basin morphometry for identifying zones for artificial recharge: A case study from the Gagas River Basin,India

Drainage basin morphometry is a quantitative way of describing the characteristics of the surface form of a drainage basin and provides important information about the region’s topography and underlying geological structures. It plays an important role in hydrogeological investigations for delineating zones of adequate groundwater potential and selecting sites for construction of artificial recharge structures.