Active normal faulting along the Mt. Morrone south-western slopes (central Apennines,Italy)

In the present work we analyse one of the active normal faults affecting the central Apennines, i.e. the Mt. Morrone normal fault system. This tectonic structure, which comprises two parallel, NW-SE trending fault segments, is considered as potentially responsible for earthquakes of magnitude ≥ 6.5 and its last activation probably occurred during the second century AD. Structural observations performed along the fault planes have allowed to define the mainly normal kinematics of the tectonic structure, fitting an approximately N 20° trending extensional deformation. Geological and geomorphological investigations performed along the whole Mt. Morrone south-western slopes permitted us to identify the displacement of alluvial fans, attributed to Middle and Late Pleistocene by means of tephro-stratigraphic analyses and geomorphological correlations with dated lacustrine sequences, along the western fault branch. This allowed to evaluate in 0.4 ± 0.07 mm/year the slip rate of this segment. On the other hand, the lack of synchronous landforms and/or deposits that can be correlated across the eastern fault segment prevented the definition of the slip rate related to this fault branch. Nevertheless, basing on a critical review of the available literature dealing with normal fault systems evolution, we hypothesised a total slip rate of the fault system in the range of 0.4 ± 0.07 to 0.8 ± 0.09 mm/year. Moreover, basing on the length at surface of the Mt. Morrone fault system (i.e. 22–23 km) we estimated the maximum expected magnitude of an earthquake that might originate along this tectonic structure in the order of 6.6–6.7.     

Loggerhead turtles Caretta caretta (Linnaeus) preying on the invading gastropod Rapana venosa (Valenciennes) in the Río de la Plata Estuary

Here we report the first observations of loggerhead turtles Caretta caretta preying on a conspicuous molluscan invader, the rapa whelk Rapana venosa. An average number of 136 opercula were found in stomach contents of five turtles, the curved carapace length ranging in from 51 to 112 cm. No other alimentary items were found in the turtles analyzed. We suggest that the rapa whelk may constitute up to 100% of the diet for immature and mature loggerheads in the Río de la Plata estuary (Uruguay), highlighting the plastic nature of the foraging behavior of loggerheads.     

Fe xxv and Fe xxvi lines from low-velocity, photoionized gas in the X-ray spectra of active galactic nuclei

We have calculated the equivalent widths of the absorption lines produced by Fe  xxv and Fe  xxvi in a Compton-thin, low-velocity photoionized material illuminated by the nuclear continuum in active galactic nuclei. The results, plotted against the ionization parameter and the column density of the gas, are a complement to those presented by Bianchi & Matt for the emission lines from the same ionic species. As an extension to the work by Bianchi & Matt, we also present a qualitative discussion on the different contributions to the He-like iron emission line complex in the regimes where recombination or resonant scattering dominates, providing a useful diagnostic tool to measure the column density of the gas. Future high-resolution missions (e.g. Astro-E2 ) will allow us to fully take advantage of these plasma diagnostics. In the meantime, we compare our results with an up-to-date list of Compton-thick and unobscured (at least at the iron line energy) Seyfert galaxies with emission and/or absorption lines from H- and He-like iron observed with Chandra and XMM–Newton .     

Role of the backstop-to-cover thickness ratio on vergence partitioning in experimental thrust wedges

The ratio between the thickness of the sedimentary sequences offscraped from the subducting plate ( H _c) and the average thickness of the backstop ( H _b) is expected to significantly influence vergence partitioning in thrust wedges. A series of simple sandbox experiments was performed to study the role of the H _c/ H _b ratio in model thrust wedges. The results obtained show that thrust wedges with H _c/ H _b values lower than 1 are essentially pro-ward verging, with minor retro-ward faulting; H _c/ H _b values greater than 1 imply an increase of vergence partitioning. When a threshold value is exceeded, fully partitioned, doubly vergent thrust wedges develop. Comparison with natural submarine thrust wedges suggests that these experimental results may provide useful insights on the evolution of structural architecture at convergent margins.     

Hypothesis on a possible role of El Ni?o in the occurrence of influenza pandemics

The El Ni?o phenomenon is the Earth??s strongest climatic fluctuation on an interannual timescale and has a quasi-global impact, although originating in the tropical Pacific Ocean. A very strong El Ni?o is recognized to cause extreme dryness and wetness in different parts of the world. We show that all the eight well-documented influenza pandemics, starting from the first certain one documented in ad 1580, originated in China and in Russia, a few years after the occurrence of a very strong or after a prolonged strong/moderate El Ni?o event. At present, the next El Ni?o will probably occur at the beginning of 2013 (Mazzarella et al. Theor Appl Climatol 100:23?C27, 2010), and this forecast may suggest to be well prepared to take appropriate precautionary epidemiological measures.     

High-pressure thermo-elastic properties of beryl (Al<Subscript>4</Subscript>Be<Subscript>6</Subscript>Si<Subscript>12</Subscript>O<Subscript>36</Subscript>) from ab initio calculations,and observations about the source of thermal expansion

Ab initio calculations of thermo-elastic properties of beryl (Al₄Be₆Si₁₂O₃₆) have been carried out at the hybrid HF/DFT level by using the B3LYP and WC1LYP Hamiltonians. Static geometries and vibrational frequencies were calculated at different values of the unit cell volume to get static pressure and mode-γ Grüneisen’s parameters. Zero point and thermal pressures were calculated by following a standard statistical-thermodynamics approach, within the limit of the quasi-harmonic approximation, and added to the static pressure at each volume, to get the total pressure (P) as a function of both temperature (T) and cell volume (V). The resulting P(V, T) curves were fitted by appropriate EoS’, to get bulk modulus (K ₀) and its derivative (K′), at different temperatures. The calculation successfully reproduced the available experimental data concerning compressibility at room temperature (the WC1LYP Hamiltonian provided K ₀ and K′ values of 180.2 Gpa and 4.0, respectively) and the low values observed for the thermal expansion coefficient. A zone-centre soft mode \( P6/mcc \to P\bar{1} \) phase transition was predicted to occur at a pressure of about 14 GPa; the reduction of the frequency of the soft vibrational mode, as the pressure is increased, and the similar behaviour of the majority of the low-frequency modes, provided an explanation of the thermal behaviour of the crystal, which is consistent with the RUM model (Rigid Unit Model; Dove et al. in Miner Mag 59:629–639, 1995), where the negative contribution to thermal expansion is ascribed to a geometric effect connected to the tilting of rigid polyhedra in framework silicates.     

Thermo-elastic behaviour of Be2BO3OH (hambergite) up to 7 GPa and 1,100 K

The thermo-elastic behaviour of Be₂BO₃(OH)_0.96F_0.04 (i.e. natural hambergite, Z = 8, a = 9.7564(1), b = 12.1980(2), c = 4.4300(1) Å, V = 527.21(1) ų, space group Pbca) has been investigated up to 7 GPa (at 298 K) and up to 1,100 K (at 0.0001 GPa) by means of in situ single-crystal X-ray diffraction and synchrotron powder diffraction, respectively. No phase transition or anomalous elastic behaviour has been observed within the pressure range investigated. P?V data fitted to a third-order Birch–Murnaghan equation of state give: V ₀ = 528.89(4) ų, K _T0 = 67.0(4) GPa and K′ = 5.4(1). The evolution of the lattice parameters with pressure is significantly anisotropic, being: K _T0(a):K _T0(b):K _T0(c) = 1:1.13:3.67. The high-temperature experiment shows evidence of structure breakdown at T > 973 K, with a significant increase in the full-width-at-half-maximum of all the Bragg peaks and an anomalous increase in the background of the diffraction pattern. The diffraction pattern was indexable up to 1,098 K. No new crystalline phase was observed up to 1,270 K. The diffraction data collected at room-T after the high-temperature experiment showed that the crystallinity was irreversibly compromised. The evolution of axial and volume thermal expansion coefficient, α, with T was described by the polynomial function: α(T) = α ₀ + α ₁ T ^?1/2. The refined parameters for Be₂BO₃(OH)_0.96F_0.04 are: α ₀ = 7.1(1) × 10^?5 K^?1 and α ₁ = ?8.9(2) × 10^?4 K ^?1/2 for the unit-cell volume, α ₀(a) = 1.52(9) × 10^?5 K^?1 and α ₁(a) = ?1.4(2) × 10^?4 K ^?1/2 for the a-axis, α ₀(b) = 4.4(1) × 10^?5 K^?1 and α ₁(b) = ?5.9(3) × 10^?4 K ^?1/2 for the b-axis, α ₀(c) = 1.07(8) × 10^?5 K^?1 and α ₁(c) = ?1.5(2) × 10^?4 K ^?1/2 for the c-axis. The thermo-elastic anisotropy can be described, at a first approximation, by α ₀(a):α ₀(b):α ₀(c) = 1.42:4.11:1. The main deformation mechanisms in response to the applied temperature, based on Rietveld structure refinement, are discussed.     

The DEM or Mt. Etna: geomorphological and structural implications

Abstract

A Digital Elevation Model (DEM) of Mt. Etna is presented; it has altimetric and planimetric resolution of 1 m and 5 m, respectively, and covers an area of about 120 km . This 3-D view of Mt. Etna allowed both recognition and location of the main morphostructural and volcano-tectonic features of the volcano. A slope map has been generated from the DEM; on the basis of slope distributions and surface textures, five acclivity domains have been recognized. The largest domain, south of the summit craters, reflects the occurrence of old plateau lavas, distinct from central volcanoes which built the present Etnean volcanic system. Interaction between the central volcanoes, with their summit calderas and failed slopes, produced the other recognised domains. Furthermore, newly identified relevant morphostructural lines are discussed. © Elsevier, Paris     

Historical Comparison of Fish Community Structure in Lower Chesapeake Bay Seagrass Habitats

Seagrass beds provide important habitat for fishes and invertebrates in many regions around the world. Accordingly, changes in seagrass coverage may affect fish communities and/or populations, given that many species utilize these habitats during vulnerable early life history stages. In lower Chesapeake Bay, seagrass distribution has contracted appreciably over recent decades due to decreased water clarity and increased water temperature; however, effects of changing vegetated habitat on fish community structure have not been well documented. We compared fish community composition data collected at similar seagrass sites from 1976–1977 and 2009–2011 to investigate potential changes in species richness, community composition, and relative abundance within these habitats. While seagrass coverage at the specific study sites did not vary considerably between time periods, contemporary species richness was lower and multivariate analysis showed that assemblages differed between the two datasets. The majority of sampled species were common to both datasets but several species were exclusive to only one dataset. For some species, relative abundances were similar between the two datasets, while for others, there were notable differences without directional uniformity. Spot (Leiostomus xanthurus) and northern pipefish (Syngnathus fuscus) were considerably less abundant in the contemporary dataset, while dusky pipefish (Syngnathus floridae) was more abundant. Observed changes in community structure may be more attributable to higher overall bay water temperature in recent years and other anthropogenic influences than to changes in seagrass coverage at our study sites.     

Intensity measures for the seismic response prediction of base-isolated buildings

Base isolation has become a widely applied technique for protecting buildings located in highly seismic areas. Due to the strongly non-linear constitutive behaviour typical of many isolation devices, the seismic response of base-isolated buildings is usually evaluated through non-linear dynamic analysis. In this type of analysis a suitable set of ground motions is needed for representing the earthquake loads and for exciting the structural model. Many methods can be found in the literature for defining the ground motions. When natural accelerograms are used, the methods mainly differ from each other based on the intensity measures used for scaling the records to the defined earthquake intensity level. Investigations have been carried out for evaluating the predictive capability of the intensity measures used in these methods: while many studies focused on ordinary buildings, only a few focused on base-isolated ones. The objective of this paper is to evaluate the most commonly used intensity measures, which are currently available in the literature, with respect to their capability to predict the seismic response of base-isolated buildings. Selected for the investigation are two frame structures characterized by a different number of storeys and base-isolated with systems having different properties. Two sets of accelerograms, consisting of ordinary and pulse-like near-fault records, are used in the analyses and in the evaluation of the intensity measures. Modified versions of existing intensity measures are also proposed, with the intent of improving the correlations between the considered intensity measures and response quantities.