Tracking past mining activity using trace metals,lead isotopes and compositional data analysis of a sediment core from Longemer Lake,Vosges Mountains,France

A 157-cm-long sediment core from Longemer Lake in the Vosges Mountains of France spans the past two millennia and was analyzed for trace metal content and lead isotope composition. Trace metal accumulation rates highlight three main input phases: Roman Times (cal. 100 BC–AD 400), the Middle Ages (cal. AD 1000–1500), and the twentieth century. Atmospheric contamination displays a pattern that is similar to that seen in peat bogs from the region, at least until the eighteenth century. Thereafter, the lake sediment record is more precise than peat records. Some regional mining activity, such as that in archaeologically identified eighteenth-century mining districts, was detected from the lead isotope composition of sediment samples. Compositional data analysis, using six trace metals (silver, arsenic, cadmium, copper, lead and zinc), enabled us to distinguish between background conditions, periods of mining, and of other anthropogenic trace metal emissions, such as the recent use of leaded gasoline.     

Dating the Tethyan Ocean in the Western Alps with radiolarite pebbles from synorogenic Oligocene molasse basins (southeast France)

For the first time in the Western Alps, radiolarite pebbles collected from Tertiary foreland molasse conglomerates are treated for microfossil extraction and dated. Among forty pebbles collected in the field, seven of them released diagnostic radiolarian assemblages ranging in age from Late Bajocian?CEarly Callovian to Middle Oxfordian?CEarly Tithonian. These ages overlap previous biochronological data obtained from in situ localities of the Schistes Lustrés Piemont zone of the French-Italian Alps and triple the number of diagnostic radiolarite samples known so far in this segment of the chain. The diagnostic pebbles are characterized by low grade metamorphism, showing that some eroded thrust-sheets from the oldest parts of the ocean escaped any tectonic burial during the Alpine convergence. Mixing of low and high-grade radiolarites, mafics and ultramafics pebbles implies that various ocean-derived units were exposed. This tectonic scenario involves tight refolding and severe uplift of the Eocene subduction wedge in the Early Oligocene.     

Measurements of iron concentration in kaolinites considering disorder broadening of EPR lines

Only one part of the EPR lines of a kaolinite spectrum of structural Fe³⁺ is clearly observable because of the overlapping of other lines with other spectra. For this reason, to determine the structural Fe³⁺ concentration we used the line near g=9, although it is not intense. A standard is needed: powders of ZnS containing given concentrations of Mn²⁺ (isoelectronic to Fe³⁺) were used for this purpose. Using the simulations of the EPR spectra, the concentration (number of Fe³⁺ per Al³⁺) is determined; it is in the range 10^?5 to 10^?4 for our samples. Considering that the crystal-field disorder around Fe³⁺ is responsible for line broadening, we looked for a possible effect of the broadening on the intensity of the EPR spectra. This effect is taken as a distribution of the parameter λ=B₂²/B₂⁰. The influence of the parameter λ and its statistical distribution on the position, shape, width and intensity of the EPR line has been calculated using simulation procedures. The correction due to the disorder on the calculated concentration is of the same order of magnitude as the precision measurement. This method can be applied for other kaolinites by comparing the area of their g=9 lines with known ones.     

Genetic differentiation ofNiphargus rhenorhodanensis (Amphipoda) from interstitial and karst environments

Electrophoretic variation in proteins encoded by seven presumptive gene loci was analyzed in four populations of the stygobiont amphipodNiphargus rhenorhodanensis. The four populations occur in different habitats, including one in drainage canals, another from sediments of the Ain River, a tributary of the Rhône River, and the remaining two occur in a karstic massif (Dorvan, Ain, France) in the epikarstic and at the base level of the massif, respectively. Six of the seven loci were polymorphic within or among populations, with as many as three electromorphs segregating at the most variable loci. Significant deficiencies in the frequency of heterozygotes were common. Genetic divergence between the two populations of the Dorvan Massif and between the two of the Ain River (forest and sediment habitats) was large. This was highly unexpected, particularly in the case of the two hydrologically connected populations of the Dorvan Massif. It is suggested that either low migration rates or the presence of ecological barriers to gene flow may result in strong genetic differention among local populations ofNiphargus.     

Guidelines for the good practice of surface wave analysis: a product of the InterPACIFIC project

Surface wave methods gained in the past decades a primary role in many seismic projects. Specifically, they are often used to retrieve a 1D shear wave velocity model or to estimate the V_S,30 at a site. The complexity of the interpretation process and the variety of possible approaches to surface wave analysis make it very hard to set a fixed standard to assure quality and reliability of the results. The present guidelines provide practical information on the acquisition and analysis of surface wave data by giving some basic principles and specific suggestions related to the most common situations. They are primarily targeted to non-expert users approaching surface wave testing, but can be useful to specialists in the field as a general reference. The guidelines are based on the experience gained within the InterPACIFIC project and on the expertise of the participants in acquisition and analysis of surface wave data.     

Redistribution of riverine and rainfall freshwater by the Bay of Bengal circulation

Ocean Dynamics - We use satellite-derived currents and a Lagrangian approach to investigate the redistribution of the precipitation minus evaporation (P-E) and river freshwater inputs into Bay of...     

Characterization of contact properties in biocemented sand using 3D X-ray micro-tomography

The mechanical efficiency of the biocementation process is directly related to the microstructural properties of the biocemented sand, such as the volume fraction of calcite, its distribution within the pore space (localized at the contact between grains, over the grain surfaces) and the contact properties: coordination number, contact surface area, contacts orientation and types of contact. In the present work, all these micromechanical properties are computed, for the first time, from 3D images obtained by X-ray tomography of intact biocemented sand samples. The evolution of all these properties with respect to the volume fraction of calcite is analyzed and compared between each other (from untreated sand to highly cemented sand). Whatever the volume fraction of calcite, it is shown that the precipitation of the calcite is localized at the contacts between grains. These results are confirmed by comparing our numerical results with analytical estimates assuming that the granular medium is made of periodic simple cubic arrangements of grains and by considering two extreme cases of precipitation: (1) The calcite is localized at the contact, and (2) the grains are covered by a uniform layer of calcite. In overall, the obtained results show that a small percentage of calcite is sufficient to get a large amount of cohesive contacts.

     

Interannual variability and predictability of African easterly waves in a GCM

The interannual variability of African Easterly Waves (AEWs) is assessed with the help of spatio-temporal spectral analysis (STSA) and complex empirical orthogonal functions methods applied to the results of ten-member multiyear ensemble simulations. Two sets of experiments were conducted with the Météo-France ARPEGE-Climat GCM, one with interactive soil moisture (control), and the other with soil moisture relaxed towards climatological monthly means calculated from the control. Composites of Soudano–Sahelian AEWs were constructed and associated physical processes and dynamics were studied in the frame of the waves. It is shown that the model is able to simulate realistically some interannual variability in the AEWs, and that this dynamical aspect of the West African climate is potentially predictable (i.e. signal can be extracted from boundary conditions relatively to internal error of the GCM), especially along the moist Guinean coast. Compared with ECMWF 15-year reanalysis (ERA15), the maximum activity of AEWs is located too far to the South and is somewhat too zonal, but the main characteristics of the waves are well represented. The major impact of soil moisture relaxation in the GCM experiments is to reduce the seasonal potential predictability of AEWs over land by enhancing their internal variability.     

Effect of intertidal compared to subtidal exposure on the uptake,loss and oxidative toxicity of water-born benzo[a]pyrene in the mantle and whole tissues of the mussel,Mytilus edulis L

Blue mussels (Mytilus edulis, L.) were exposed to a single dose of 1 ppb benzo[a]pyrene (BaP) under subtidal (SC) or tidal conditions (TC; 6 h immersion, 6 h emersion) in order to follow its bioaccumulation in whole mussel and mantle tissue, and to compare BaP-mediated toxicity on lipids (malonaldehyde formation, MDA) in the mantle. Rapid uptake of BaP (70-80% of BaP initially introduced in tanks) was observed in both conditions after 12 h, but subsequent depuration in clean water was slower in TC mussels. BaP levels decreased in whole tissue in both conditions between 12 and 24 h, but increased in mantle. The mantle BaP levels were similar during the first 4 days in SC and TC, but whereas they decreased in SC after 7 days. BaP was retained at high levels in mantle in TC until the end of the study (14 days). In both conditions, significant increases (P < 0.05) in lipid peroxidation were observed after 4 days, but MDA levels were approximately 3 times higher in the mantle of TC than SC mussels, although BaP tissue concentrations were similar. These observations suggested that increased BaP-mediated toxicity in mantle lipid was due to the interactive effect of the tidal cycle of immersion/emersion on BaP-mediated oxidative damage.     

SIMS analyses of oxygen isotopes: Matrix effects in Fe-Mg-Ca garnets

Large instrumental mass fractionation (IMF) may occur during measurements of oxygen isotope ratios by SIMS. Part of this fractionation depends on crystal structure and mineral composition. In order to improve the accuracy of SIMS measurements, we gathered 6 commonly used garnet standards and prepared 6 others to adequately cover the composition range Alm_0-73, Prp_0-99, Grs_0-20. Electron microprobe analyses were performed at UBP-Clermont to check the chemical homogeneity of these standards. Oxygen isotope compositions were determined by laser fluorination and mass spectrometry at UW-Madison. Ten SIMS sessions and 336 δ¹⁸O measurements at CRPG-Nancy, on a Cameca IMS1270 instrument, demonstrate that the standards are homogeneous with external reproducibility of 0.3‰ (1σ). In terms of δ¹⁸O, SIMS measurements indicate that, during a single session, IMF can vary up to 6.3‰ from one garnet standard to another. In most of the sessions, IMF can be correlated with the grossular content. However, for a satisfactory correction scheme, we suggest the combination of the 3 main components (Ca, Fe, Mg). This is done using a simple least square calculation routine. The correction coefficients determined for each session can be used to calculate the IMF and correct the measured isotopic ratio of a garnet of known chemical composition. This way, we were able to reproduce the δ¹⁸O values of most of the Fe-Mg-Ca garnet standards within ± 0.6‰. Interestingly, the use of only 3 end-member standards (AlmCMG, PrpMM, GrsSE) plus a standard of intermediate composition (e.g. UWG-2) is sufficient to reproduce δ¹⁸O within the same precision. Thus, linear interpolation among end-member standards is satisfactory in the case of the garnet solid-solutions. Two studies carried out on zoned garnets from the Alps and the Pyrenees indicate that matrix effects become significant when variations in grossular contents are important (> 10%). In order to obtain reliable isotope ratio measurements on Fe-Mg-Ca garnets using a SIMS, we suggest a correction scheme using at least 3 reliable end-member standards plus a standard of intermediate composition (a garnet standard closest to the average composition of the analysed garnet). This allows cross-checking and incorporates a correction based on the variations in composition of zoned crystals.