Simulation experiment on hydrocarbon generating potential of various source rocks on the northern margin of the Qaidam Basin,Qinghai, China

The northern margin of the Qaidam Basin is one of the main oil-gas exploration areas in western China, where source rocks are composed mostly of Middle and Lower Jurassic dark mud shale, carbargillite and coal. A large number of subsurface and outcrop samples differing in lithology with different types of organic matter were selected for resource evaluation, research and calculation. And among them, 13 samples were used for simulation experiment on hydrocarbon generating potential of various source rocks. At first, two kinds of heating modes were compared through simulation experiment, including single temperature-step heating and continual heating. Perhaps, the process of hydrocarbon generation and expulsion occurred naturally between a close system and an open system. In addition, the first heating mode was convenient, and all its reaction products were involved in the whole thermal evolution, and the final simulation experimental results were basically in consistency with the natural evolution trend Therefore, the first heating mode was adopted and the hydrocarbon yield of every sample was worked out. According to the type and lithology of organic matter and the hydrocarbon yield of samples for simulation experiment, hydrocarbon generation and expulsion mode with three kinds of lithology and five types of source rock has been established to provide the basis for hydrocarbon generation evaluation, research and resource calculation.     

铁路工程GPS施工控制坐标的建立方法

GPS定位技术可以提供高精度的WGS-84坐标系坐标,这些坐标不能直接用于铁路工程测量,需要转换为施工坐标.介绍不需要计算转换参数的坐标转换方法棗直接投影法,详细说明该方法的主要原理及算法.     

基于小波变换的全色和多光谱遥感图像融合

基于多分辨率小波变换,针对高分辨率全色图像和多光谱图像的融合,提出了一种基于方向可调滤波器的区域能量测量的小波变换融合算法.将此方法与HIS和传统小波的融合方法比较,结果表明,该方法在保留多光谱图像光谱信息的同时,能够更好地保留高分辨率图像的空间信息,融合效果有较大改善.     

大冶铁矿国家矿山公园规划实践

大冶铁矿的开发利用在为我国的钢铁事业作出巨大贡献的同时,也给矿区的地表环境、森林资源带来了很大的破坏。矿山公园的规划实施可极大地改善矿山环境,为矿山的可持续发展提供较好的途径。     

基于DOA和TOA的机载单站无源定位

研究可对地面固定目标进行定位跟踪的机载单站无源定位方法,建立二维等效定位模型,利用DOA和TOA信息建立状态方程及测量方程,经过扩展卡尔曼滤波算法进行定位及跟踪。通过计算机仿真结果验证,该方法稳定、有效,且可达到相当的精度。     

基于圆增长特征的点状要素群选取算法

控制点、独立地物等在地图上呈点群状表达,如何高效、合理地实现此类要素的自动综合是地图多尺度表达的重要问题。文中在前人研究的基础上,提出一种基于圆增长特征的点状要素群结构化选取算法,实现点状要素群的自动选取。其基本原理是：根据一个点与其周围点重要性程度的比较来确定该点删除与否,从而确保其拓扑关系和几何信息的正确性。实验证明：该算法实用、有效。     

江西省永平铜矿西部排土场极限堆载高度确定

国内外对排土场极限堆载高度的理论计算缺乏研究,目前尚无成熟的统一理论计算方法。文章结合永平铜矿西部排土场的工程实例,在进行边坡工程地质条件勘察与排土场岩土物理力学性质试验研究的基础上,采用数值计算方法对排土场进行了分层堆载数值模拟计算。通过对计算结果的分析,得到位移、塑性区与安全系数随堆载高度的变化规律,并确定了该排土场的极限堆载高度。     

大岭子金矿地质特征及选矿浸出率

大岭子金矿V1矿体赋存于中元古界高黎贡山群变质岩中,受韧性剪切带控制,矿石类型以氧化矿石为主。提出选矿依据。     

长春地区高回填土力学性质的研究

依据工程实例中桩顶位移数据,利用位移与内力之间的关系,采用"m"法,进行反分析研究.结果表明,支护桩桩顶理论位移为147.9 mm,与实际位移64 m差距较大,所以高回填土c,φ值所采用的经验值不精确.本文给出了长春地区回填土c,φ值的折减系数(分别为1.4和1.28).     

蚀变岩的蠕变特性研究

以某水电站工程项目为依托,利用自行研制的试验仪器对大量的蚀变岩做了单轴压缩流变试验。通过对试验数据的处理和分析,得到了该种岩石的流变,并对蚀变岩的蠕变特性进行了分析总结,为工程设计提供了试验依据。