The Maltese Islands: climate, vegetation and landscape

The Maltese Islands, situated in the central Mediterranean, occupy an area of only some 316 km². The climate is typically Mediterranean: the average annual rainfall is c. 530 mm of which some 85% falls during the period October to March; the mean monthly temperature range is 12--26 °C, and the islands are very windy and sunny. Although small, the Maltese Islands have a considerable diversity of landscapes and ecosystems which are representative of the range and variety of those of the Mediterranean region. The islands are composed mainly of limestones, the soils are young and are very similar to the parent rocks, and there are no mountains, streams or lakes, but only minor springs; the main geomorphological features are karstic limestone plateaux, hillsides covered with clay taluses, gently rolling limestone plains, valleys which drain runoff during the wet season, steep sea-cliffs on the south-western coasts, and gently sloping rocky shores to the Northeast. The main vegetational assemblages are maquis, garigue and steppe; minor ones include patches of woodland, coastal wetlands, sand dunes, freshwater, and rupestral communities; the latter are the most scientifically important in view of the large number of endemic species they support. Human impact is significant. Some 38% of the land area is cultivated, c. 15% is built up, and the rest is countryside. The present landscape is a result of the interaction of geology and climate, coupled with the intense human exploitation of the environment over many thousands of years, which has altered the original condition of the vegetation cover, principally through the diversion of vast tracts of land to cultivation, the construction of terraces, water catchment devices, irrigation channels and drainage ditches, the grazing of animals on uncultivated land, and the development of land for buildings and industry. The scantiness of the soil, combined with the erratic rainfall and the periodic disturbance of the vegetation cover, has resulted in extensive erosion. As a consequence it is now difficult for the original vegetation to reassert itself, affecting the landscape drastically and permanently. Much of the original native flora has been lost or marginalised and the present day non-urban landscape is now dominated by vegetation consisting mainly of ruderal and introduced species. As the population increases, and human pressure on the environment mounts, such trends are likely to continue and it is only very recently that some important initiatives have been taken to manage the environment and halt the deterioration of the landscape.     

Water quality impacts from mining in the Black Hills,South Dakota,USA

The focus of this research was to determine if abandoned mines constitute a major environmental hazard in the Black Hills. Many abandoned gold mines in the Black Hills contribute acid and heavy metals to streams. In some areas of sulfide mineralization local impacts are severe, but in most areas the impacts are small because most ore deposits consist of small quartz veins with few sulfides. Pegmatite mines appear to have negligible effects on water due to the insoluble nature of pegmatite minerals. Uranium mines in the southern Black Hills contribute some radioactivity to surface water, but the impact is limited because of the dry climate and lack of runoff in that area.     

Mineralogy, geochemistry, and Nd isotope composition of the Rainbow hydrothermal field, Mid-Atlantic Ridge

Petrological, geochemical, and Nd isotopic analyses have been carried out on rock samples from the Rainbow vent field to assess the evolution of the hydrothermal system. The Rainbow vent field is an ultramafic-hosted hydrothermal system located on the Mid-Atlantic Ridge characterized by vigorous high-temperature venting (∼365°C) and unique chemical composition of fluids: high chlorinity, low pH and very high Fe, and rare earth element (REE) contents (Douville et al., Chemical Geology 184:37–48, 2002). Serpentinization has occurred under a low-temperature (<270°C) retrograde regime, later overprinted by a higher temperature sulfide mineralization event. Retrograde serpentinization reactions alone cannot reproduce the reported heat and specific chemical features of Rainbow hydrothermal fluids. The following units were identified within the deposit: (1) nonmineralized serpentinite, (2) mineralized serpentinite—stockwork, (3) steatite, (4) semimassive sulfides, and (5) massive sulfides, which include Cu-rich massive sulfides (up to 28wt% Cu) and Zn-rich massive sulfide chimneys (up to 5wt% Zn). Sulfide mineralization has produced significant changes in the sulfide-bearing rocks including enrichment in transition metals (Cu, Zn, Fe, and Co) and light REE, increase in the Co/Ni ratios comparable to those of mafic Cu-rich volcanic-hosted massive sulfide deposits and different ¹⁴³Nd/¹⁴⁴Nd isotope ratios. Vent fluid chemistry data are indicative of acidic, reducing, and high temperature conditions at the subseafloor reaction zone where fluids undergo phase separation most likely under subcritical conditions (boiling). An explanation for the high chlorinity is not straightforward unless mixing with high salinity brine or direct contribution from a magmatic Cl-rich aqueous fluid is considered. This study adds new data, which, combined with the current knowledge of the Rainbow vent field, brings compelling evidence for the presence, at depth, of a magmatic body, most likely gabbroic, which provides heat and metals to the system. Co/Ni ratios proved to be good tools used to discriminate between rock units, degree of sulfide mineralization, and positioning within the hydrothermal system. Deeper units have Co/Ni <1 and subsurface and surface units have Co/Ni >1.     

Effect of sampling and linkage on fault length and length–displacement relationship

The power-law exponent (n) in the equation: D=cL ⁿ , with D = maximum displacement and L = fault length, would be affected by deviations of fault trace length. (1) Assuming n=1, numerical simulations on the effect of sampling and linkage on fault length and length–displacement relationship are done in this paper. The results show that: (a) uniform relative deviations, which means all faults within a dataset have the same relative deviation, do not affect the value of n; (b) deviations of the fault length due to unresolved fault tip decrease the values of n and the deviations of n increase with the increasing length deviations; (c) fault linkage and observed dimensions either increase or decrease the value of n depending on the distribution of deviations within a dataset; (d) mixed deviations of the fault lengths are either negative or positive and cause the values of n to either decrease or increase; (e) a dataset combined from two or more datasets with different values of c and orders of magnitude also cause the values of n to deviate. (2) Data including 19 datasets and spanning more than eight orders of fault length magnitudes (10⁻²–10⁵ m) collected from the published literature indicate that the values of n range from 0.55 to 1.5, the average value being 1.0813, and the peak value of n _d (double regression) is 1.0–1.1. Based on above results from the simulations and published data, we propose that the relationship between the maximum displacement and fault length in a single tectonic environment with uniform mechanical properties is linear, and the value of n deviated from 1 is mainly caused by the sampling and linkage effects.     

A surface complexation model for cadmium and lead adsorption onto diatom surface

This work is devoted to the physico-chemical study of cadmium and lead interaction with diatom–water interfaces for two marine planktonic (Thalassiosira weissflogii = TW, Skeletonema costatum = SC) and two freshwater periphytic species (Achnanthidium minutissimum = AMIN, Navicula minima = NMIN) by combining adsorption measurements with surface complexation modeling. Reversible adsorption experiments were performed at 20 °C after 3 h of exposure as a function of pH, metal concentration in solution, and ionic strength. While the shape of pH-dependent adsorption edge is similar among all four diatom species, the constant-pH adsorption isotherm and maximal binding capacities differ. These observations allowed us to construct a surface complexation model for cadmium and lead binding by diatom surfaces that postulates the constant capacitance of the electric double layer and considers Cd and Pb complexation with mainly carboxylic and, partially, silanol groups. Parameters of this model are in agreement with previous acid–base titration results and allow quantitative reproduction of all adsorption experiments.     

Lithofacies succession of maar crater deposits in the Eifel area (Germany)

ABSTRACT Maar craters often contain exceptionally preserved fossils and maar sediments may reflect detailed environmental changes. Volcanosedimentary processes in a Middle Eocene maar crater lake are illustrated by the deposits of Eckfeld Maar in the Tertiary Hocheifel Volcanic Field (Rhenish Massif, Germany). The maar origin of the basin is evident from a circular negative gravity anomaly which indicates a low-density funnel-shaped basin filling. From the facies analysis of an Eocene (Eckfeld) and a Pleistocene (Döttingen) maar we develop a lithozone classification for the interpretation of maar sediments: syn-/post-eruptive breccias are followed by a fining-upwards sequence of lacustrine mud with coarse layers and final swamp deposits. From the facies analysis and regional geological data we reconstruct the pre- to post-eruptive history of a maar crater prior to post-Eocene uplift. These observations can be used for the interpretation of Tertiary and Quaternary maar craters that are ideal fossil and sediment traps.     

Distribution and sources of pre-anthropogenic lead isotopes in deep ocean water from FeMn crusts

The lead isotope composition of ocean water is not well constrained due to contamination by anthropogenic lead. Here the global distribution of lead isotopes in deep ocean water is presented as derived from dated (ca. 100 ka) surface layers of hydrogenetic Fe-Mn crusts. The results indicate that the radiogenic lead in North Atlantic deep water is probably supplied from the continents by river particulates, and that lead in Pacific deep water is similar to that characteristic of island and continental volcanic arcs. Despite a short residence time in deep water (80–100 a), the isotopes of lead appear to be exceedingly well mixed in the Pacific basin. There is no evidence for the import of North Atlantic deep water-derived lead into the Pacific ocean, nor into the North Indian Ocean. This implies that the short residence time of lead in deep water prohibits advection over such long distances. Consequently, any climate-induced changes in deep-water flow are not expected to result in major changes in the seawater Pb-isotope record of the Pacific Ocean.     

Graben generation of major sedimentary basins

Regional isostatic adjustment to the load that fills the trough of a large graben will produce a surface depression that extends far beyond the boundaries of the load. Sediment infilling of this depression can lead to the development of a major sedimentary basin as the regional adjustment mechanism approaches isostatic equilibrium.     

Metal content and environmental risk assessment around high-altitude mine sites

Gold mining activities in Apolobamba area, northwest of La Paz, Bolivia have created serious environmental concern and great risk to human health. The current methods used to extract gold are too primitive resulting in metal contamination of soil and water. The objectives of this study were to: (1) determine the degree of metal pollution, and (2) assess the risk to human health and environment in the Apolobamba area. Soil, water, sediment samples, and mine spills were collected and analyzed. Metals including Pb, Cu, Zn, Cd, and Hg concentrations were higher in surface soils than in subsurface soils indicating active atmospheric deposition of metals. Sediment samples had elevated levels of metals probably from mine spills discharged into the Sunchulli River. Surface soils in the Sunchulli community show the highest levels of Pb and Hg in all soil samples and may pose a risk to the health of the human population and environment.     

Distribution and possible sources of organochlorine residues in sediments of a large urban estuary,Port Jackson,Sydney

Sydney Harbour is surrounded by a large capital city of about four million people and its highly urbanised (86%) catchment supports a substantial industrial base and an extensive transport infrastructure. Large commercial and naval ports occupy the waterway and the harbour is an important recreational area. Surficial sediment in Sydney Harbour contains high concentrations of PCBs, HCB, total chlordane, total DDT, aldrin, dieldrin, heptachlor and heptachlor‐epoxide, but low concentrations of lindane. PCBs, total chlordane, and to a lesser extent dieldrin, are most elevated in sediment in creeks on the southern shores of the harbour suggesting sources within older, highly urbanised/industrialised catchments of western‐central Sydney. There are high concentrations of total DDT and HCB in sediments of the upper harbour and Homebush Bay suggesting that chemical industries on the shores of the estuary in this area are sources of these contaminants. Although no sediment quality guidelines apply in Australia, empirically derived biological effects criteria suggest that sediment over extensive areas of Sydney Harbour may have an adverse impact on biota. Especially of concern are sediments containing high concentrations of chlordane and DDT.