Numerical Modeling of Sediment Mass Sliding and Tsunami Generation: The Case of February 7, 1963, in Corinth Gulf,Greece

Numerical modeling of a landslide process at the continental slope by taking into account slope parameters is performed for the tsunami event of February 7, 1963, reported in the Corinth Gulf, central Greece. A layered sediment structure was considered, and an initial external dynamic action at the landslide process was introduced. The results obtained were quite consistent with the observational runup data as well as with the results arrived at by conventional rigid-body and viscous-fluid models. However, this approach permits to describe in detail the formation of several wave groups and particular tsunami characteristics that are strongly dependent on the landslide model.     

Positioning requirements for the tsunami warning system

Abstract

Canada has increased the number of tsunami warning stations on the Pacific Coast from two to three. The last gauge was installed at the north end of Vancouver Island, thereby filling a large gap previously existing and providing full coverage along the coast. The record of gauges at two of the three locations is accessible either by telephone or by means of meteor burst communication, alleviating the difficulties experienced during the tsunami threat of May 6, 1986, when telephone communications were disrupted by heavy use. The gauge at Langara Island will be relocated in a more accessible and also a more tsunami‐responsive location at Rennell Sound in the Queen Charlotte Islands. All tsunami gauges also serve as tide gauges, recording the water level every 15 min. In the event of a tsunami, the recording interval can be altered to every 60 s. Suggestions have been made that Canada attempt deep‐sea recording of tsunamis off its Pacific Coast. Although this would be of great scientific value, no such program is contemplated at this time.     

A New Methodology for Incorporating Tide Gauge Data in Sea Surface Topography Models

As part of the Vertical Offshore Reference Frames (VORF) project sponsored by the U. K. Hydrographic Office, a new model for Sea Surface Topography (SST) around the British Isles has been developed. For offshore areas (greater than 30 km from the coast), this model is largely derived from satellite altimetry. However, its accuracy and level of detail have been enhanced in coastal areas by the inclusion of not only the 60 PSMSL tide gauges with long-term records around the coasts of the United Kingdom and Ireland but also some 385 gauges established at different epochs and for different observation spans by the U. K. Admiralty. All tide gauge data were brought into a common reference frame by a combination of datum models and direct GPS observations, but a more significant challenge was to bring all short-term sea level observations to an unbiased value at a common epoch. This was achieved through developing a spatial-temporal correlation model for the variations in mean sea level around the British Isles, which in turn meant that gauges with long-term observation spans could be used as control points to improve the accuracy of Admiralty gauges. It is demonstrated that the latter can contribute point observations of mean sea level (MSL) with a precision of 0.078 m. A combination of least squares collocation and interpolation was developed to merge the coastal point and offshore gridded data sets, with particular algorithms having to be developed for different configurations of coastal topology. The resulting model of sea surface topography is shown to present a smooth transition from inshore coastal areas to offshore zones. Further benefits of the techniques developed include an enhanced methodology for detecting datum discontinuities at permanent tide gauges.     

Determination of characteristics of atmospheric motions from satellite multiwave remote sensing data

A method of determination of atmospheric dynamic characteristics from the data of remote sensing from a geostationary satellite is described. The method is based on the use of inhomogeneities in the concentration field of a conservative additive as tracers and on the application of correlation-extreme algorithms. Unlike the common methods used abroad, this method is able to determine not only the vector field of wind velocity but also the coefficient of turbulent diffusion and vorticity. Results of computations of the fields of the horizontal component of wind velocity and the effective coefficient of horizontal mesoscale turbulent diffusion from the Meteosat-8 SEVIRI water-vapor channel data are presented. It is shown that the average values of the effective coefficient of mesoscale horizontal turbulent diffusion in the areas with a predominantly turbulized air-mass motion are 1.5 times greater than in the areas where a laminar motion dominates. Specific features of the calculated values of the upper-troposphere dynamic characteristics in different stages of the North Atlantic TC Helene (September 2006) are analyzed.     

The origin and age of the Alpha-Mendeleev and Lomonosov ridges in the Amerasia Basin

The results of the bathymetry simulation indicate the emplacement of the Mesozoic Arctic plume into the lithosphere of the Alpha-Mendeleev and Lomonosov ridges. The study also presents a model of the thermal subsidence to the asthenosphere. The calculated coefficients are compared with those obtained for the Greenland-Iceland and Iceland-Faeroe ridges, which were formed in response to hotspot activity. It was shown that the coefficients of the thermal subsidence in the central part of the Alpha-Mendeleev and Lomonosov Ridges are similar to those calculated for the Greenland-Iceland and Iceland-Faeroe ridges. This indicates the thermal regime of the subsidence of the Alpha-Mendeleev and Lomonosov ridges since the Early Miocene and the increased influence of the Arctic plume on the ridge genesis. The ridges are interpreted to have formed over a broad geological timeframe, from the late Cretaceous to the Cenozoic. A geothermal method, which is highly informative in terms of the age of the lithosphere, provides better constraints on the timing of ridge formation. The age estimates for the Alpha-Mendeleev (97–79 Ma) and Lomonosov ridges (69–57 Ma) derived from the geothermal data allowed us to draw a convincing conclusion about the genesis of these ridges.     

Heterotrophic microbial communities on the water-sediment boundary in the Kara Sea

The qualitative and quantitative characteristics of the heterotrophic microbial communities (bacteria, flagellates, and ciliates) in the thin water-sediment layer in the Kara Sea are analyzed. The bacterial abundance correlated with the concentration of organic matter, whereas their size depended on the abundance of heterotrophic flagellates. The number of species of heterotrophic flagellates increased with the increase in the bacterial number. A positive relationship between the bacterial abundance and the ration of heterotrophic flagellates was observed at the offshore stations, probably due to the grazing pressure. The density of the ciliates on the soft silty and sandy-silty sediments was extremely low. The share of upstream filter feeding ciliate species increased with the increase in the abundance of the flagellates, probably due to the shift to less selective feeding strategies at higher values of the food concentrations. The classification of the heterotrophic microbial communities in the surface sediment layer has revealed two distinct types of the communities. The river communities are rich in species and are characterized by the high abundance of microorganisms. They are gradually replaced by marine communities at the salinity of 9%.     

Space-time variability of the field of mechanical energy transfer from the atmosphere to the Indian Ocean

An analysis of the spatial and temporal variability of the field of mechanical energy transfer (MET) from the atmosphere into the ocean is based on a separate numerical simulation of evolution for the terms of source function for a wind-wave model conducted in the Indian Ocean area for the period 1998 to 2009. The MET field is described by two integral values calculated per unit area: the total rate of energy flux from the wind to waves, I _E (x, t), and the rate of energy-loss flux for the wind waves, D _E (x, t). To solve this problem, the wind field W(x, t) is used, downloaded from the NCEP/NOAA archive [1], and the fields I _E (x, t) and D _E (x, t) were calculated using the numerical model WAM [2] with the modified source function proposed in [3]. Maps for the fields I _E (x, t) and D _E (x, t) were obtained by calculations with different scales of the space-time averaging, extreme and average values of the MET were found, seasonal and interannual variability was estimated, and the 12-year trend for several mean quantities was obtained.     

Australia’s no-take marine protected areas: Appropriate conservation or inappropriate management of fishing?

The absence of properly identified mechanisms to adequately protect the marine environment remains a major shortcoming in Australia’s commitment to biodiversity conservation. The current commitment to a National Representative System of Marine Protected Areas (NRSMPA) falls far short of providing adequate protection against the suite of existing and potential threats even though areas are designated as being ‘protected’. In this paper it is argued that the actions taken under the NRSMPA are disproportionately concentrated on regulating fishing, including the closing of areas in so-called sanctuary zones to all types of fishing. In the absence of clearly identified threats from most forms of fishing and without assessment of how best to manage those few fishing threats that have been identified, such actions are inefficient and mostly inappropriate. Moreover, they do not provide adequate protection against the full suite of threats to marine environments. Adequate measures for the proper conservation of these areas and/or the protection of marine biodiversity more generally are not being provided and in most cases threats are not even adequately described and evaluated.     

Deep-water geomorphology of the glaciated Irish margin from high-resolution marine geophysical data

The continental margin offshore of western Ireland offers an opportunity to study the effects of glacial forcing on the morphology and sediment architecture of a mid-latitude margin. High resolution multibeam bathymetry and backscatter data, combined with shallow seismic and TOBI deep-towed side-scan sonar profiles, provide the basis for this study and allow a detailed geomorphological interpretation of the northwest Irish continental margin. Several features, including submarine mass failures, canyon systems and escarpments, are identified in the Rockall Trough for the first time. A new physiographic classification of the Irish margin is proposed and linked to the impact of glaciations along the margin. Correlation of the position and dimensions of moraines on the continental shelf with the level of canyon evolution suggests that the sediment and meltwater delivered by the British–Irish Ice Sheet played a fundamental role in shaping the margin including the upslope development of some of the canyon systems. The glacial influence is also suggested by the variable extent and backscatter signal of sedimentary lobes associated with the canyons. These lobes provide an indirect measurement of the amount of glaciogenic sediment delivered by the ice sheet into the Rockall Trough during the last glacial maximum. None of the sedimentary lobes demonstrates notable relief, indicating that the amount of glaciogenic sediment delivered by the British–Irish Ice Sheet into the Rockall Trough was limited. Their southward disappearance suggests a more restricted BIIS, which did not reach the shelf edge south of 54°23′ N. The various slope styles observed on the Irish margin represent snapshots of the progressive stages of slope development for a glacially-influenced passive margin and may provide a predictive model for the evolution of other such margins.     

Hydroelastic optimisation of a composite marine propeller in a non-uniform wake

The purpose of this paper is to optimise the hydroelastic performance of a composite marine propeller to reduce vibration and dynamic stress. A hydroelasticity method based on the finite element method (FEM) coupled with computational fluid dynamics (CFD) is used to simulate the composite marine propeller in a non-uniform wake. Composite blades can be considered as a cantilever-like laminated structure experiencing an unsteady hydrodynamic load and centrifugal force. The objective of the improved design is to minimise the vibratory hub loads. The ply angle and stacking sequence are considered as the design variables. The nonlinear periodic transient responses and vibration hub loads of the composite blade are obtained by solving coupled equations using the Newton–Raphson numerical procedure. Compared to the starting design of the propeller, the optimum solution results in a 49.6–70.6% reduction of the 7/rev hub loads.