A preliminary case study of potential ceramic raw materials in the Aileu area of Timor Leste

The newly independent country of Timor Leste is located in the eastern half of Timor Island (Indonesian archipelago). Geological studies of the country’s mineral resources and extractive activities are practically non-existent. There is evidence of the exploitation of ceramic raw materials at outcrop level and two small brick kilns, nowadays inactive, in the Dili and Aileu areas. Near Aileu, there are light-coloured silt-rich deposits, interpreted as overbank deposits, interbedded with ancient river terraces (post-Pliocene) overlying metamorphic bedrock. These sediments are the subject of this study, which encompassed geological mapping and preliminary characterisation. Tectonically, the area is a graben, preserving alluvium and colluvium deposits. Five channel samples representative of the silt-rich deposits were collected. Semi-quantitative mineralogical analysis shows that the samples are made of illite, quartz and kaolinite clays, with accessory illite/vermiculite interstratified minerals and K-feldspar. The chemical data show agreement with the estimated mineralogical composition. The grain size distribution points to a silt-dominated assemblage. Most samples have a satisfactory extrudability but deficient moulding properties. After firing, the sampled raw materials form a final product with possible ceramic capability for whiteware production.     

Long-term pan evaporation observations as a resource to understand the water cycle trend: case studies from Australia

Abstract

Acceleration of the global water cycle over recent decades remains uncertain because of the high inter-annual variability of its components. Observations of pan evaporation (E_pan), a proxy of potential evapotranspiration (ET_p), may help to identify trends in the water cycle over long periods. The complementary relationship (CR) states that ET_p and actual evapotranspiration (ET_a) depend on each other in a complementary manner, through land–atmosphere feedbacks in water-limited environments. Using a long-term series of E_pan observations in Australia, we estimated monthly ET_a by the CR and compared our estimates with ET_a measured at eddy covariance Fluxnet stations. The results confirm that our approach, entirely data-driven, can reliably estimate ET_a only in water-limited conditions. Furthermore, our analysis indicated that ET_a did not show any significant trend in the last 30 years, while short-term analysis may indicate a rapid climate change that is not perceived in a long-term perspective.

Editor Z.W. Kundzewicz; Associate editor D. Gerten

Citation Lugato, E., Alberti, G., Gioli. B., Kaplan, J.O., Peressotti, A., and Miglietta, F., 2013. Long-term pan evaporation observations as a resource to understand the water cycle trend: case studies from Australia. Hydrological Sciences Journal, 58 (6), 1287–1296.     

Structural analysis of the superficial deformation of the 1969 Pariahuanca earthquakes (Central Peru)

An analysis of the superficial structures related to the Huaytapallana fault is presented. This fault was formed during the Pariahuanca earthquakes of July 24 and October 1, 1969. The fault trends N120E and is 3.5 km long, the displacement is 0.70 m left-lateral slip and 1.6 vertical upthrust. At most places the fault appears as a steep flexure associated with open fractures and mostly gravity folds, all of them almost parallel to it. Oblique, “en échelon” shears, often associated with small folds, are developed in the turf which is partly detached from its substratum. The analysis of these fractures is consistent with a mean N65E shortening direction. The compressional and dilatational quadrants obtained by means of this analysis fit rather well with the focal-mechanism data. On the other hand, some of the en échelon fold and fault systems provide a model of similar features with a magnitude of several kilometers.     

Structure of the upper mantle in the Northeastern Atlantic close to the azores-gibraltar ridge from surface-wave and body-wave observations

Phase velocities of teleseismic Rayleigh waves have been measured in the central North Atlantic on both sides of the Azores-Gibraltar Ridge (AGR) by means of a specially designed long-period station network. The dispersion data obtained were regionalized and then subjected to a “hedgehog” inversion, which gives a set of upper mantle models compatible with the observational data within specified error bounds.Reasonable model solutions were selected by using regional body-wave observations, such as P_n- and S_n-wave velocities determined from earthquakes along the AGR. The S_(itn) velocities measured indicate that the shear-wave velocity in the mantle part of the lithosphere is much higher on the northern side of the AGR. Strongly negative P-wave residuals in this area indicate faster seismic propagation than implied by the Jeffreys-Bullen travel-time tables, while propagation is much slower in the Gulf of Cadiz area. Furthermore the residuals show a clear difference for paths through oceanic and continental domains and suggest that the transition between these two domains extends much further into the ocean on the southern side of the AGR than on the northern side.The proposed model for the structure of the upper mantle in that region shows that there exists a pronounced velocity contrast across the AGR. Thickening of the lithospheric plate with increasing plate age is indicated to the south of the ridge. The greatest thickness is reached close to the continental margin within a zone about 500 km wide, whose velocity close to the Canary Islands and Madeira is significantly lower, probably due to the well-known volcanic activity there. These observations together with the travel time residuals reveal that this zone seems to be of a transitional nature somewhere between a continental and oceanic structure.     

Thermobarometry of the Bleikvassli Zn-Pb-(Cu) deposit, Nordland, Norway

The Bleikvassli massive sulfide ore deposit is hosted by Proterozoic pelitic, quartzofeldspathic, and amphibolitic rocks of the Uppermost Allochthon of the Scandinavian Caledonides. Staurolite-garnet-biotite and kyanite-staurolite-biotite assemblages indicate that metamorphism reached the kyanite zone of the amphibolite facies. Geothermobarometry was conducted on rocks in and around the deposit using a variety of silicate and sulfide calibrations. Temperature determinations are most reliant on the garnet-biotite exchange reaction, with analyses obtained from 259 garnet rims and adjacent biotite. Results from nine calibrations of the garnet-biotite geothermometer are considered, but compositional limitations of many calibrations involving high Ca and Mn contents in garnet and Al^VI and Ti in biotite make many of the coexisting mineral pairs unsuitable. Average temperatures calculated from the two calibrations that most closely address the garnet-biotite compositions observed at Bleikvassli are 584 °C ± 49 °C and 570 °C ± 40 °C. The application of two calibrations of the garnet-staurolite geothermometer on a limited number of samples yields 581 °C ± 2 °C and 589 °C ± 12 °C, assuming a _H2O=0.84, based upon calculations of the modal proportions of gaseous species. Pressure determinations are less constrained. Phengite and plagioclase-biotite-garnet-muscovite geobarometers give average pressures of approximately 5.0 kbar and 8.5 ± 1.2 kbar, respectively. Pressures obtained from the sphalerite-hexagonal pyrrhotite-pyrite barometer average 7.7 ± 1.0 kbar. In consideration of these results, the peak metamorphic conditions at the Bleikvassli deposit are estimated to be 580 °C and 8 kbar. Received: 18 June 1997 / Accepted: 14 May 1998     

A coupling of mixed and continuous Galerkin finite element methods for poroelasticity I: the continuous in time case

In this paper, we formulate a finite element procedure for approximating the coupled fluid and mechanics in Biot’s consolidation model of poroelasticity. Here, we approximate the pressure by a mixed finite element method and the displacements by a Galerkin method. Theoretical convergence error estimates are derived in a continuous in-time setting for a strictly positive constrained specific storage coefficient. Of particular interest is the case when the lowest-order Raviart–Thomas approximating space or cell-centered finite differences are used in the mixed formulation, and continuous piecewise linear approximations are used for displacements. This approach appears to be the one most frequently applied to existing reservoir engineering simulators.     

Interparticle forces and displacements in granular materials

In a micromechanics framework, the main issue is the relationship between the microscale variables and the macroscale variables. These variables are used to describe either the statics or kinematics of the system. The relationships can be classified in two ways, namely, the “averaging” relationships and the “tracking” relationships. The averaging relationships express the macroscale variable as an averaging of the microscale variables; for example, the stress as a function of contact forces. The “tracking” relationships express the microscale variable as a function of the macroscale variables; for example, the contact force at a given orientation as a function of the stress. Based on fundamental premises, a unique averaging relationship exists for either the statics or the kinematics case. However, it is generally impossible to have a unique expression of the “tracking” relationship because they are generally derived with certain assumptions. In this paper, we will present expressions of the “tracking” based on three different approaches, namely, (1) energy conservation principle, (2) representation theory, and (3) indirect scheme. The assumptions used in each approach are discussed. The results are compared among the three approaches as well as that obtained from the Discrete Element Method (DEM).     

Late thermal events based on zircon fission track ages in northeastern New South Wales and southeastern Queensland: Links to Sydney Basin seismicity?

Zircon, concentrated from basaltic terrains in northeastern New South Wales and southeastern Queensland, reveals some unexpectedly young fission track peaks. Between 2 to 13 Ma in age, these peaks are younger than known Tertiary basaltic ages from these regions which match older fission track peaks. Analysis of the fission track data suggests that the young dates are probably not reset ages due to recent heating events such as bush fires, but more likely mark thermal resetting by later volcanic eruptions.

The young ages decrease southwards from Queensland through northern New South Wales and trend toward seismic zones within the Sydney Basin in the Newcastle, Blue Mountains and Illawarra regions. A model based on northward motion of the Australian plate over a hot asthenospheric source (0.75° latitude/Ma over 12 Ma)) predicts the positions of most young zircon ages to within ± 70 km in latitude when projected from seismic sites at Newcastle and Bowral‐Robertson.

A minor hot spot source is proposed, some 250 km across, which triggered isolated basaltic and zircon‐bearing eruptions every few million years and now underlies the southern Sydney Basin. This would bring Sydney Basin seismicity into line with other seismic zones known at present hot spot positions across southeastern Australia and the Tasman Sea. It raises questions concerning activation of local seismicity, potential for volcanic risk and distribution of young uplift in the Sydney region. Similar studies are needed to test other puzzling seismic zones (e.g. the Dalton‐Gunning Zone).