Staurolite as an isotopic U–Pb geochronometer

A new approach is suggested for measuring the real U–Pb and Pb–Pb ages of rock-forming metamorphic staurolite. Previously, two approaches have been used for this purpose: (1) measurement of the lead isotopic compositions, uranium and lead contents in leach substance as a product of the step-leaching technique; age is calculated by plotting the Pb–Pb leaching isochron; and (2) lead and uranium isotopic compositions are measured in completely dissolved mineral material without leaching. In both cases, it is assumed a priori that inclusions, overgrowths, secondary phases, and the host mineral are cogenetic. This assumption may lead to errors in the measured age. The technique suggested in this paper uses various reagents (acids) to purify staurolite from the above-mentioned secondary phases while obtaining a staurolite “pure culture,” its subsequent disolution, introduction of the mixed spike, separation of lead and uranium compounds, and, finally, estimation of a real staurolite age using several samples to plot the monomineralic Pb–Pb isochron or by plotting measured Pb/U ratios in the diagram with concordia. The data can be used then to reconstruct the P–T–t evolution of metamorphism.     

Revised age of proximal deposits in the Zagros foreland basin and implications for Cenozoic evolution of the High Zagros

The regionally extensive, coarse-grained Bakhtiyari Formation represents the youngest synorogenic fill in the Zagros foreland basin of Iran. The Bakhtiyari is present throughout the Zagros fold-thrust belt and consists of conglomerate with subordinate sandstone and marl. The formation is up to 3000 m thick and was deposited in foredeep and wedge-top depocenters flanked by fold-thrust structures. Although the Bakhtiyari concordantly overlies Miocene deposits in foreland regions, an angular unconformity above tilted Paleozoic to Miocene rocks is expressed in the hinterland (High Zagros).

The Bakhtiyari Formation has been widely considered to be a regional sheet of Pliocene–Pleistocene conglomerate deposited during and after major late Miocene–Pliocene shortening. It is further believed that rapid fold growth and Bakhtiyari deposition commenced simultaneously across the fold-thrust belt, with limited migration from hinterland (NE) to foreland (SW). Thus, the Bakhtiyari is generally interpreted as an unmistakable time indicator for shortening and surface uplift across the Zagros. However, new structural and stratigraphic data show that the most-proximal Bakhtiyari exposures, in the High Zagros south of Shahr-kord, were deposited during the early Miocene and probably Oligocene. In this locality, a coarse-grained Bakhtiyari succession several hundred meters thick contains gray marl, limestone, and sandstone with diagnostic marine pelecypod, gastropod, coral, and coralline algae fossils. Foraminiferal and palynological species indicate deposition during early Miocene time. However, the lower Miocene marine interval lies in angular unconformity above ~ 150 m of Bakhtiyari conglomerate that, in turn, unconformably caps an Oligocene marine sequence. These relationships attest to syndepositional deformation and suggest that the oldest Bakhtiyari conglomerate could be Oligocene in age.

The new age information constrains the timing of initial foreland-basin development and proximal Bakhtiyari deposition in the Zagros hinterland. These findings reveal that structural evolution of the High Zagros was underway by early Miocene and probably Oligocene time, earlier than commonly envisioned. The age of the Bakhtiyari Formation in the High Zagros contrasts significantly with the Pliocene–Quaternary Bakhtiyari deposits near the modern deformation front, suggesting a long-term (> 20 Myr) advance of deformation toward the foreland.     

Intermetallic compounds,copper and palladium alloys in Au–Pd ore of the Skaergaard pluton,Greenland

Copper–palladium intermetallic compounds and alloys (2314 grains) from the Au–Pd ore of the Skaergaard layered gabbroic pluton have been studied. Skaergaardite PdCu, nielsenite PdCu₃, (Cu,Pd)_β, (Cu,Pd)_α, (Pd,Cu,Au,Pt) alloys, and native palladium have been identified as a result of 1680 microprobe analyses. The average compositions and various chemical varieties of these minerals are characterized, as well as vertical and lateral zoning in distribution of noble metals. The primary Pd–Cu alloys were formed within a wide temperature interval broadly synchronously with cooling and crystallization of host gabbro and in close association with separation of Fe–Cu sulfide liquid. In the course of crystallization of residual gabbroic melt enriched in iron, noble and heavy metals and saturated with the supercritical aqueous fluid, PGE and Au are selectively concentrated in the Fe–Cu sulfide phase as Pd–Cu and Cu–Au alloys.     

Magma plumbing beneath Anak Krakatau volcano, Indonesia: evidence for multiple magma storage regions

Understanding magma plumbing is essential for predicting the behaviour of explosive volcanoes. We investigate magma plumbing at the highly active Anak Krakatau volcano (Indonesia), situated on the rim of the 1883 Krakatau caldera by employing a suite of thermobarometric models. These include clinopyroxene-melt thermobarometry, plagioclase-melt thermobarometry, clinopyroxene composition barometry and olivine-melt thermometry. Petrological studies have previously identified shallow magma storage in the region of 2–8 km beneath Krakatau, while existing seismic evidence points towards mid- to deep-crustal storage zone(s), at 9 and 22 km, respectively. Our results show that clinopyroxene in Anak Krakatau lavas crystallized at a depth of 7–12 km, while plagioclase records both shallow crustal (3–7 km) and sub-Moho (23–28 km) levels of crystallization. These magma storage regions coincide with well-constrained major lithological boundaries in the crust, implying that magma ascent and storage at Anak Krakatau is strongly controlled by crustal properties. A tandem seismic tomography survey independently identified a separate upper crustal (<7 km) and a lower to mid-crustal magma storage region (>7 km). Both petrological and seismic methods are sensitive in detecting magma bodies in the crust, but suffer from various limitations. Combined geophysical and petrological surveys, in turn, offer increased potential for a comprehensive characterization of magma plumbing at active volcanic complexes.     

Evidence for Neotethys rooted within the Vardar suture zone from the Voras Massif, northernmost Greece

Three conflicting models are currently proposed for the location and tectonic setting of the Eurasian continental margin and adjacent Tethys ocean in the Balkan region during Mesozoic–Early Tertiary time. Model 1 places the Eurasian margin within the Rhodope zone relatively close to the Moesian platform. A Tethyan oceanic basin was located to the south bordering a large “Serbo-Pelagonian” microcontinent. Model 2 correlates an integral “Serbo-Pelagonian” continental unit with the Eurasian margin and locates the Tethys further southwest. Model 3 envisages the Pelagonian zone and the Serbo-Macedonian zone as conjugate continental units separated by a Tethyan ocean that was sutured in Early Tertiary time to create the Vardar zone of northern Greece and former Yugoslavia. These published alternatives are tested in this paper based on a study of the tectono-stratigraphy of a completely exposed transect located in the Voras Mountains of northernmost Greece. The outcrop extends across the Vardar zone, from the Pelagonian zone in the west to the Serbo-Macedonian zone in the east.Within the Voras Massif, six east-dipping imbricate thrust sheets are recognised. Of these, Units 1–4 correlate with the regional Pelagonian zone in the west (and related Almopias sub-zone). By contrast, Units 5–6 show a contrasting tectono-stratigraphy and correlate with the Paikon Massif and the Serbo-Macedonian zone to the east. These units form a stack of thrust sheets, with Unit 1 at the base and Unit 6 at the top. Unstacking these thrust sheets places ophiolitic units between the Pelagonian zone and the Serbo-Macedonian zone, as in Model 3. Additional implications are, first, that the Paikon Massif cannot be seen as a window of Pelagonian basement, as in Model 1, and, secondly, Jurassic andesitic volcanics of the Paikon Massif locally preserve a gneissose continental basement, ruling out a recently suggested origin as an intra-oceanic arc.We envisage that the Almopias (Vardar) ocean rifted in Triassic time, followed by seafloor spreading. The Almopias ocean was consumed beneath the Serbo-Macedonian margin in Jurassic time, generating subduction-related arc volcanism in the Paikon Massif and related units. Ophiolites were emplaced onto the Pelagonian margin in the west and covered by Late Jurassic (pre-Kimmeridgian) conglomerates. Other ophiolitic rocks formed within the Vardar zone (Ano Garefi ophiolite, Unit 4) in latest Jurassic–Early Cretaceous time and were not deformed until Early Tertiary time. The Vardar zone finally sutured in the Early Tertiary creating the present imbricate thrust structure of the Voras Mountains.     

天然气水合物开发安全检测技术应用研究

中国近年来先后在南海北部和祁连山南缘青海省天峻县永久冻土带中发现天然气水合物,这是一种新能源,它将对中国能源结构的调整和能源紧张的缓解起到非常重要的作用。但是,天然气水合物开采安全是个大问题,已经引起了国际上专家们的极大关注。俄罗斯南方国立技术大学地球物理、探矿工程和石油钻采教研室开发出来的天然气水合物开发安全检测技术和方法,可以准确确定出射孔部位的位置、检查射孔部位是否阻塞和如何解阻等关键技术,对天然气水合物开采安全提供了技术支撑,对此应该进行研究。     

Coexisting alkali feldspars in felsic members of the Cauro-Bastelica ring complex,Corsica

The granodioritic and gneissic Hercynian basement in Corsica was intruded, in the Triassic, by non-orogenic ring complexes in which the association early rhyolite-hypersolvus granite-granophyre-late subsolvus granite is clearly developed. The association of low albite and maximum microcline in mesoperthites cannot be attributed to Alpine low-grade metamorphism, restricted to fault zones. On a number of lines of evidence, the development of ordered, almost pure K-feldspar in this rapidly cooled complex appears related to an episode of mild reheating attending emplacement of late subsolvus granites, rocks formed from melts enriched, perhaps even saturated in aqueous fluids.     

Mean wind-direction shear through a forest canopy

The equations of motion applying to the wind field in a forest canopy are simplified to a balance between the shearing stress gradient and either the form-drag of the leaves in the upper dense canopy, or the overall horizontal pressure gradient in the more open space beneath. The equations imply that, in descending through the forest, the stress and wind vectors turn through an angle which depends on the forest characteristics and on the stability and the speed of the airflow above the forest. The turning is roughly confirmed by an overall average measured on a very flat site near Thetford, Norfolk, covered by an extensive uniform pine forest.