Geological and thermochronological studies of the Dashui gold deposit, West Qinling Orogen, Central China

The Dashui gold deposit is a structurally controlled, Carlin-type gold deposit hosted by recrystallised limestone in the West Qinling Orogen of Central China. The major, structurally late east-trending Dashui Fault forms the hanging wall to the gold mineralisation at the Dashui mine and defines the contact between Middle Triassic limestone and a steeply dipping overlying succession of Middle Triassic argillaceous limestone, dolomite, and sandstone. Multiple carbonate veins and large-scale supergene enrichment, represented by hematite, goethite, limonite and jarosite, characterise the deposit. Detailed geochronological investigation using zircon SHRIMP U-Pb dating reveals that volcanic rocks closely associated with the Dashui gold deposit were synchronous with the Ge’erkuohe Granite and pre-date mineralisation. The igneous dyke sample from the hanging wall has the same U-Pb zircon age as the footwall, ca. 213 Ma. (U-Th)/He thermochronology on dykes in the hanging wall and footwall of the Dashui Fault yields identical (U-Th)/He zircon ages of ca. 210 Ma but distinct (U-Th)/He apatite ages of ca. 136 and 211 Ma, respectively. Therefore, the hanging wall and footwall are interpreted as having distinct post-mineralisation exhumation histories. Reverse fault movement exhumed the hanging wall ~2 to 4 km since the Late Triassic with the main component of faulting taking place between the Late Triassic and Early Cretaceous. These relationships suggest a Late Triassic to Early Cretaceous age for the primary gold mineralisation at the Dashui gold deposit, with the corollary that any ‘missing portion’ of the deposit, previously hypothesised to exist in the hanging wall of the Dashui Fault, has been eroded away. The mineralisation in the footwall may have been supergene enriched soon after the primary mineralisation was emplaced, because it has been located at shallow depth since the Late Triassic. Semi-quantitative results obtained in this study also constrain the maximum depth of formation of the Dashui gold at no more than 2 km.     

A few remarks on the kinetics of static grain growth in rocks

Static grain growth is a relatively simple transformation in which grain size increases under driving forces caused by grain and interphase boundary curvature. Given the relative simplicity of the protocol for grain growth experiments, measurements of grain boundary mobility show surprising variations. Boundary mobilities during grain growth are affected by solute and impurity chemistry, chemical fugacity of trace and major elements, pore size and number, pore fluid chemistry, the presence of melts, and the presence of solid second phases, as well as temperature and pressure. All of these factors may exert influence on grain growth of rocks in natural situations and many are also present during the laboratory experiments. Provided that the necessary kinetics parameters are known, bounds may be placed on the interface mobility when pores, partial melts, or solutes are present. To predict the rate of grain growth in natural situations will require improved laboratory data and careful consideration of the thermodynamic conditions likely to be encountered in nature.     

Post-peak,fluid-mediated modification of granulite facies zircon and monazite in the Trivandrum Block,southern India

The quarry at Kottavattom in the Trivandrum Block of southern India contains spectacular examples of fluid-assisted alteration of high-grade metamorphic rocks. Garnet-biotite gneiss has undergone a change in mineral assemblage to form submetre scale orthopyroxene-bearing patches, later retrogressed to form an amphibole-bearing lithology. These patches, often referred to as arrested or incipient charnockite, crosscut the original metamorphic foliation and are typically attributed to passage of a low aH₂O fluid through the rock. Whilst this conversion is recognised as a late stage process, little detailed chronological work exists to link it temporally to metamorphism in the region. Zircon and monazite analysed from Kottavattom not only record metamorphism in the Trivandrum Block but also show internal, lobate textures crosscutting the original zoning, consistent with fluid-aided coupled dissolution-reprecipitation during formation of the orthopyroxene-bearing patches. High-grade metamorphism at the quarry occurred between the formation of metamorphic monazite at ~585 Ma and the growth of metamorphic zircon at ~523 Ma. The fluid-assisted alteration of the garnet-biotite gneiss is poorly recorded by altered zircon with only minimal resetting of the U–Pb system, whereas monazite has in some cases undergone complete U–Pb resetting and records an age for fluid infiltration at ~495 Ma. The fluid event therefore places the formation of the altered patches at least 25 Myr after the zircon crystallisation in the garnet-biotite gneiss. The most likely fluid composition causing the modification and U–Pb resetting of zircon and monazite is locally derived hypersaline brine.     

On the heat budget of the Arabian Sea

This study analyzes the heat budget of the Arabian Sea using satellite-derived sea-surface temperature (SST) from 1985 to 1995 along with other data sets. For a better understanding of air–sea interaction, canonical average monthly fields representing the spatial and temporal structure of the various components of the heat balance of the Arabian Sea are constructed from up to 30 years of monthly atmospheric and oceanic data. The SST over the Arabian Sea is not uniform and continually evolves with time. Cooling occurs over most of the basin during November through January and May through July, with the greatest cooling in June and July. Warming occurs over most of the basin during the remainder of the year, with the greatest warming occurring in March and September. Results indicate that the sign of the net heat flux is strongly dependent on the location and month. The effects of net heat flux and penetrative solar radiation strongly influence the change in SST during February and are less important during August and September. Horizontal advection acts to cool the sea surface during the northeast monsoon months. During the southwest monsoon horizontal advection of surface waters warms the SST over approximately the southern half of the basin, while the advection of upwelled water from the Somalia and Oman coasts substantially cools the northern basin. The central Arabian Sea during the southwest monsoon is the only area where the change in SST is balanced by the entrainment and turbulent diffusion at the base of the mixed layer. Agreement between the temporal change in the satellite-derived SST and the change calculated from the conservation of heat equation is surprisingly good given the errors in the measured variables and the bulk formula parameters. Throughout the year, monthly results over half of the basin agree within 3°. Considering that the SST changes between 8° and 12° over the year, this means that our results explain from 62% to 75% of the change in SST over 56% of the Arabian Sea. Two major processes contribute to the discrepancy in the change in SST calculated according to the heat budget equation and the change in SST derived from satellite observations. The first is the effect of the horizontal advection term. The position of the major eddies and currents during the southwest monsoon greatly affects the change in SST due to the large gradient in temperature between the cold upwelled waters along the Somali coast to the warm waters in the interior of the basin. The second major process is the thermocline effect. In areas of shallow mixed-layer depth, high insolation and wind speeds of either less than 3 m/s or greater than 15 m/s, the bulk formulae parameterization of the surface heat fluxes is inappropriate.     

Submarine hydrothermal activity and gold-rich mineralization at Brothers Volcano, Kermadec Arc, New Zealand

Brothers volcano, of the Kermadec intraoceanic arc, is host to a hydrothermal system unique among seafloor hydrothermal systems known anywhere in the world. It has two distinct vent fields, known as the NW Caldera and Cone sites, whose geology, permeability, vent fluid compositions, mineralogy, and ore-forming conditions are in stark contrast to each other. The NW Caldera site strikes for ??600?m in a SW?CNE direction with chimneys occurring over a ??145-m depth interval, between ??1,690 and 1,545?m. At least 100 dead and active sulfide chimney spires occur in this field and are typically 2?C3?m in height, with some reaching 6?C7?m. Their ages (at time of sampling) fall broadly into three groups: <4, 23, and 35?years old. The chimneys typically occur near the base of individual fault-controlled benches on the caldera wall, striking in lines orthogonal to the slopes. Rarer are massive sulfide crusts 2?C3?m thick. Two main types of chimney predominate: Cu-rich (up to 28.5?wt.% Cu) and, more commonly, Zn-rich (up to 43.8?wt.% Zn). Geochemical results show that Mo, Bi, Co, Se, Sn, and Au (up to 91?ppm) are correlated with the Cu mineralization, whereas Cd, Hg, Sb, Ag, and As are associated with the dominant Zn-rich mineralization. The Cone site comprises the Upper Cone site atop the summit of the recent (main) dacite cone and the Lower Cone site that straddles the summit of an older, smaller, more degraded dacite cone on the NE flank of the main cone. Huge volumes of diffuse venting are seen at the Lower Cone site, in contrast to venting at both the Upper Cone and NW Caldera sites. Individual vents are marked by low-relief (??0.5?m) mounds comprising predominately native sulfur with bacterial mats. Vent fluids of the NW Caldera field are focused, hot (??300°C), acidic (pH????2.8), metal-rich, and gas-poor. Calculated end-member fluids from NW Caldera vents indicate that phase separation has occurred, with Cl values ranging from 93% to 137% of seawater values. By contrast, vent fluids at the Cone site are diffuse, noticeably cooler (??122°C), more acidic (pH?1.9), metal-poor, and gas-rich. Higher-than-seawater values of SO₄ and Mg in the Cone vent fluids show that these ions are being added to the hydrothermal fluid and are not being depleted via normal water/rock interactions. Iron oxide crusts 3?years in age cover the main cone summit and appear to have formed from Fe-rich brines. Evidence for magmatic contributions to the hydrothermal system at Brothers includes: high concentrations of dissolved CO₂ (e.g., 206?mM/kg at the Cone site); high CO₂/³He; negative ??D and ??¹⁸O_H2O for vent fluids; negative ??³⁴S for sulfides (to ?4.6??), sulfur (to ?10.2??), and ??¹⁵N₂ (to ?3.5??); vent fluid pH values to 1.9; and mineral assemblages common to high-sulfidation systems. Changing physicochemical conditions at the Brothers hydrothermal system, and especially the Cone site, occur over periods of months to hundreds of years, as shown by interlayered Cu?+?Au- and Zn-rich zones in chimneys, variable fluid and isotopic compositions, similar shifts in ³He/⁴He values for both Cone and NW Caldera sites, and overprinting of ??magmatic?? mineral assemblages by water/rock-dominated assemblages. Metals, especially Cu and possibly Au, may be entering the hydrothermal system via the dissolution of metal-rich glasses. They are then transported rapidly up into the system via magmatic volatiles utilizing vertical (??2.5?km long), narrow (??300-m diameter) ??pipes,?? consistent with evidence of vent fluids forming at relatively shallow depths. The NW Caldera and Cone sites are considered to represent stages along a continuum between water/rock- and magmatic/hydrothermal-dominated end-members.     

Rotation and dilation deformation mechanisms for auxetic behaviour in the α-cristobalite tetrahedral framework structure

 Analytical expressions are derived for the Poisson's ratios associated with a three-dimensional network of regular, corner-sharing tetrahedra in which: (1) the tetrahedra are assumed to be rigid and free to rotate relative to each other; (2) the tetrahedra are assumed to maintain shape and orientation but are free to change size (dilate); (3) tetrahedral rotation and dilation are assumed to act concurrently. The structure has a primitive unit cell containing four tetrahedra and is analogous to the molecular structure of α-cristobalite. Strain-dependent variations in Poisson's ratio are also predicted by the models. For deformation due to tetrahedral rotation the network is found to exhibit negative Poisson's ratios in each of the three principal directions, with the magnitude of the Poisson's ratio being dependent on the angle of rotation of the tetrahedra. The behaviour of the Poisson's ratio is isotropic in the transverse plane, but anisotropic elsewhere. In the dilation model negative Poisson's ratios equal to −1 are observed for uniaxial loading in any of the principal directions, with the value being constant irrespective of tetrahedral size. The model for concurrent tetrahedral rotation and dilation allows positive as well as negative Poisson's ratios, with the values determined by the framework geometry and relative strengths of the two mechanisms. The concurrent model also offers a design route to materials and structures having ultrahigh Young's moduli. Received: 15 February 2000 / Accepted: 1 October 2000     

Stratigraphic architecture and sedimentology of a Late Pleistocene subaqueous moraine complex,southwest Ireland

Glacigenic sediments exposed in coastal cliffs cut through undulatory terrain fronting the Last Glacial Maximum laterofrontal moraine at Waterville on the Iveragh Peninsula, southwest Ireland, comprise three lithofacies. Lithofacies 1 and 2 consist of interdigitated, offlapping and superimposed ice‐proximal subaqueous outwash and stacked sequences of cohesionless and cohesive subaqueous debris flows, winnowed lag gravels and coarse‐grained suspension deposits. These are indicative of sedimentation in and around small grounding line fans that prograded from an oscillating glacier margin into a proglacial, interlobate lake. Lithofacies 3 comprises braided river deposits that have undergone significant syn‐sedimentary soft‐sediment deformation. Deposition was likely related to proglacial outwash activity and records the reduction of accommodation space for subaqueous sedimentation, either through the lowering of proglacial water levels or due to basin infilling. The stratigraphic architecture and sedimentology of the moraine at Waterville highlight the role of ice‐marginal depositional processes in the construction of morphostratigraphically significant ‘end moraine’ complexes in Great Britain and Ireland. Traditional ‘tills’ in these moraines are often crudely stratified diamictons and gravelly clinoforms deposited in ice‐proximal subaqueous and subaerial fans. Copyright © 2011 John Wiley & Sons, Ltd.