Stick-slip unstable shear failure as a source of high frequency elastic radiation

Summary The results of laboratory measurements on square perspex models with a stress concentrator under uniaxial compression are presented. An attempt was made to interpret these results in order to determine the mutual relations between the mechanical parameters characterizing the treated models, including their focal zones, parameters of model loading, parameters of seismogenic displacement and parameters of radiated elastic pulses. Particular attention was given to the study of slip displacement, slip velocity, rupture velocity, nucleation points of rupture propagation, nucleation points of elastic radiation and to the frequency analysis of radiated pulses. Measurements of the displacement in the focal zone enabled us to determine the source function, to construct theoretical seismograms in a far field and to compare them with the real pulses from ultrasonic transducers located there. This allowed testing theoretical and experimental approaches to the study of how slip displacement, slip velocity and rupture velocity are related to the parameters of radiated pulses.     

Die Verlässlichkeit der Eötvösschen Drehwagen

Ohne Zusammenfassung     

Fourier Power Spectra of Solar Noise Storms

We analyzed three noise storms recorded on 200?–?400 MHz Trieste Callisto radio spectra on 2 July 2012, 8 July 2012, and 16 July 2012 by the Fourier method. We divided intervals of the noise storms into five-minute intervals, and in these intervals we computed the mean Fourier spectra as a function of the wave numbers in the frequency and height-scale spaces. We found that these Fourier spectra, where the spectrum from the quiet-activity interval was subtracted, are power-law spectra. The mean power-law index of these spectra in the range \(\ln(k_{z}) = [1.8, 2.9]\) (where \(k_{z}\) is the wave number in the height-scale space) is \(-1.7\pm0.14\), \(-1.6\pm0.14\), and \(-1.5 \pm0.12\) for the 2 July 2012, the 8 July 2012, and the 16 July 2012 noise storms, respectively. It appears that as the number of Type-I bursts in the studied interval increases, the power-law index becomes closer to \(-5/3\); this is known as the Kolmogorov spectral index. The power-law index of the noise storms is very similar to that of the narrowband dm-spikes found in our previous studies. Furthermore, we found a break in the power spectra at \(\ln(k_{z}) \approx2.9\), and the mean power-law index values above this break are \(-2.9\pm0.46\), \(-3.1\pm0.65\), and \(-3.4\pm0.98\), respectively.     

A new Late Holocene sea-level record from the Mississippi Delta: evidence for a climate/sea level connection?

A detailed relative sea-level (RSL) record was constructed for the time interval 600–1600 AD, using basal peat to track sea level and containing 16 sea-level index points that capture ～60 cm of RSL rise. The study area is in the Mississippi Delta where the spring tidal range is ～0.47 m, the impact of ocean currents on sea-surface topography is limited, and crustal motions are well constrained. Age control was obtained by AMS ¹⁴C dating and most ages represent weighted means of two subsamples. Sample elevations were determined by combining differential GPS measurements with optical surveying. All index points were plotted as error boxes using 2σ confidence intervals for the ages, plus all vertical errors involved in sampling and surveying, as well as the indicative range of the samples. A striking clustering of sea-level index points between ～1000 and ～1200 AD suggests a possible acceleration in the rate of RSL rise. Removal of the long-term trend (0.60 mm yr^?1) allows for the possibility of a sea-level oscillation with a maximum amplitude of ～55 cm. However, given the size of the error boxes the possibility that oscillations did not occur cannot be entirely ruled out. Comparison of the new RSL record with various proxy climate records suggests that sea level in this area may have responded to hemispheric temperature changes, including the Medieval Warm Period and the Little Ice Age. However, given the error margins associated with this reconstruction, it is stressed that this causal mechanism is tentative and requires corroboration by high-resolution sea-level reconstructions elsewhere.     

Ontogenic variation and effect of collection procedure on leaf biomechanical properties of Mediterranean seagrass Posidonia oceanica (L.) Delile

Leaf mechanical traits are important to understand how aquatic plants fracture and deform when subjected to abiotic (currents or waves) or biotic (herbivory attack) mechanical forces. The likely occurrence of variation during leaf ontogeny in these traits may thus have implications for hydrodynamic performance and vulnerability to herbivory damage, and may be associated with changes in morphologic and chemical traits. Seagrasses, marine flowering plants, consist of shoot bundles holding several leaves with different developmental stages, in which outer older leaves protect inner younger leaves. In this study we examined the long‐lived seagrass Posidonia oceanica to determine ontogenic variation in mechanical traits across leaf position within a shoot, representing different developmental stages. Moreover, we investigated whether or not the collection procedure (classical uprooted shoot versus non‐destructive shoot method: cutting the shoot without a portion of rhizome) and time span after collection influence mechanical measurements. Neither collection procedure nor time elapsed within 48 h of collection affected measurements of leaf biomechanical traits when seagrass shoots were kept moist in dark cool conditions. Ontogenic variation in mechanical traits in P. oceanica leaves over intermediate and adult developmental stages was observed: leaves weakened and lost stiffness with aging, while mid‐aged leaves (the longest and thickest ones) were able to withstand higher breaking forces. In addition, younger leaves had higher nitrogen content and lower fiber content than older leaves. The observed patterns may explain fine‐scale within‐shoot ecological processes of leaves at different developmental stages, such as leaf shedding and herbivory consumption in P. oceanica.     

Some Insights into Topographic,Elastic and Self-gravitation Interaction in Modelling Ground Deformation and Gravity Changes in Active Volcanic Areas

Surface displacements and gravity changes due to volcanic sources are influenced by medium properties. We investigate topographic, elastic and self-gravitation interaction in order to outline the major factors that are significant in data modelling. While elastic-gravitational models can provide a suitable approximation to problems of volcanic loading in areas where topographic relief is negligible, for prominent volcanoes the rough topography could affect deformation and gravity changes to a greater extent than self-gravitation. This fact requires the selection, depending on local relief, of a suitable model for use in the interpretation of surface precursors of volcanic activity. We use the three-dimensional Indirect Boundary Element Method to examine the effects of topography on deformation and gravity changes in models of magma chamber inflation/deflation. Topography has a significant effect on predicted surface deformation and gravity changes. Both the magnitude and pattern of the geodetic signals are significantly different compared to half-space solutions. Thus, failure to account for topographic effects in areas of prominent relief can bias the estimate of volcanic source parameters, since the magnitude and pattern of deformation and gravity changes depend on such effects.     

The GTC: An Advanced 10m Telescope for the ORM

The Gran Telescopio CANARIAS (GTC) is a high performance 10-m class telescope whose construction has been promoted by the IAC (Instituto de Astrofísica de Canarias). It will be installed at the Roque de los Muchachos Observatory (ORM), in the island of La Palma. First light is planned for end-2002. The key science drivers for the project are image quality, operational efficiency and reliability, as emphasized in the Conceptual Design Document which was finished in mid-97. The Preliminary Design is now proceeding on all aspects of the project. The GTC Project is presently funded at the 70% level by Spain. The scientific drives behind the GTC project are described here, as well as the current technical, managerial, and operational baseline. This revised version was published online in July 2006 with corrections to the Cover Date.     

Efficacy of Coagulants and Ballast Compounds in Removal of Cyanobacteria (<Emphasis Type="Italic">Microcystis</Emphasis>) from Water of the Tropical Lagoon Jacarepaguá (Rio de Janeiro,Brazil)

Eutrophication is considered the most important water quality problem in freshwaters and coastal waters worldwide promoting frequent occurrence of blooms of potentially toxic cyanobacteria. Removal of cyanobacteria from the water column using a combination of coagulant and ballast is a promising technique for mitigation and an alternative to the use of algaecides. In laboratory, we tested experimentally the efficiency of two coagulants, polyaluminium chloride (PAC) and chitosan (made of shrimp shells), alone and combined with two ballasts: red soil (RS) and the own lagoon sediment, to remove natural populations of cyanobacteria, from an urban brackish coastal lagoon. PAC was a very effective coagulant when applied at low doses (≤8 mg Al L^?1) and settled the cyanobacteria, while at high doses (≥16 mg Al L^?1) large flocks aggregated in the top of test tubes. In contrast, chitosan was not able to form flocks, even in high doses (>16 mg L^?1) and did not efficiently settle down cyanobacteria when combined with ballast. The RS itself removed 33–47 % of the cyanobacteria. This removal was strongly enhanced when combined with PAC in a dose-dependent matter; 8 mg Al L^?1 was considered the best dose to be applied. The lagoon sediment alone did not promote any settling of cyanobacteria but removal was high when combined with PAC. Combined coagulant and ballast seems a very efficient, cheap, fast and safe curative measure to lessen the harmful cyanobacteria bloom nuisance in periods when particularly needed, such as around the 2016 Olympics in Jacarepaguá Lagoon.     

The crystal chemistry of lithium and Fe3+ in synthetic orthopyroxene

Lithian ferrian enstatite with Li₂O = 1.39 wt% and Fe₂O₃ 7.54 wt% was synthesised in the (MgO–Li₂O–FeO–SiO₂–H₂O) system at P = 0.3 GPa, T = 1,000°C, fO₂ = +2 Pbca, and a = 18.2113(7), b = 8.8172(3), c = 5.2050(2) Å, V = 835.79(9) Å³. The composition of the orthopyroxene was determined combining EMP, LA-ICP-MS and single-crystal XRD analysis, yielding the unit formula ^M2(Mg_0.59Fe _0.21 ²⁺ Li_0.20) ^M1(Mg_0.74Fe _0.20 ³⁺ Fe _0.06 ²⁺ ) Si₂O₆. Structure refinements done on crystals obtained from synthesis runs with variable Mg-content show that the orthopyroxene is virtually constant in composition and hence in structure, whereas coexisting clinopyroxenes occurring both as individual grains or thin rims around the orthopyroxene crystals have variable amounts of Li, Fe³⁺ and Mg contents. Structure refinement shows that Li is ordered at the M2 site and Fe³⁺ is ordered at the M1 site of the orthopyroxene, whereas Mg (and Fe²⁺) distributes over both octahedral sites. The main geometrical variations observed for Li-rich samples are actually due to the presence of Fe³⁺, which affects significantly the geometry of the M1 site; changes in the geometry of the M2 site due to the lower coordination of Li are likely to affect both the degree and the kinetics of the non-convergent Fe²⁺-Mg ordering process in octahedral sites.