一种基于熵权法的小波去噪复合评价指标

传统的评价指标在真值未知的情况下不能满足小波去噪质量评价的要求。为此,借助变化率特征重新构建均方根误差变化量和平滑度变化量两个指标,利用熵权法定权将归一化后的两个指标线性组合,所得到的新指标即为复合评价指标。该方法借助指标的变化率随分解层数的增加表现出明显的收敛特性来确定去噪最优分解层数。实验表明,该方法能够在真值未知的情况下准确地指导小波分解,确定去噪最优分解层数,从而达到最优去噪效果。     

Assessments on slope instabilities triggered by engineering excavations near a small settlement (Turkey)

In this study, the mechanisms of slope instabilities triggered by engineering excavations at location of a planned tunnel portal in the northwest region of Turkey were assessed, and stability of the current slopes which has impacts on safety of a settlement (village) and agricultural fields was investigated. In the first stage of the study, in order to identify the geological units and structural properties of the sedimentary rocks in the area, to clarify the mechanisms of instabilities and to characterize discontinuity and rock mass properties field works were conducted. In this content, geotechnical boreholes, geophysical explorations between the boreholes, line surveys to explore discontinuity properties, preparation of slope profiles using topographical techniques and sampling of rock blocks and discontinuity planes were performed. In the second stage, laboratory tests were carried out on the samples to determine the geomechnical properties of the slope forming materials and discontinuities. Then, back analyses of the instabilities were made to assess the responsible shear strength parameters of the geological units during failures by considering laboratory shear test results too. Based on the backanalyses of the failures, the strength properties of the slope debris were estimated, and it has been clarified that the residual shear strength properties are the factors controlling slip mechanism along the beddings. Following the stability analyses, it is understood that a further instability along the mass or bedding planes in the failed and redesigned area are not expected, if the current slope geometry is not changed. However, safety factor calculated for the slope in the debris is 1.1 which is well below the recommended value in the literature. The minimum safety factor for currently stable slopes which were cut at the eastern part of the failed area is 1.22 which is also less than that suggested in literature. Some remedial measures such as mini-pile or slope flattening are suggested after analyses to increase the factor of safety for this part below the settlement.     

FLRW cosmological models with quark and strange quark matters in $$ gravity

In this paper, we have studied the magnetized quark matter (QM) and strange quark matter (SQM) distributions in the presence of \(f(R,T)\) gravity in the background of Friedmann-Lemaître-Robertson-Walker (FLRW) metric. To get exact solutions of modified field equations we have used \(f(R,T ) = R + 2 f(T)\) model given by Harko et al. with two different parametrization of geometrical parameters i.e. the parametrization of the deceleration parameter \(q \), and the scale factor \(a \) in hybrid expansion form. Also, we have obtained Einstein Static Universe (ESU) solutions for QM and SQM distributions in \(f(R,T)\) gravity and General Relativity (GR). All models in \(f(R,T)\) gravity and GR for FRW and ESU Universes with QM also SQM distributions, we get zero magnetic field. These results agree with the solutions of Akta? and Aygün in \(f(R,T)\) gravity. However, we have also discussed the physical consequences of our obtained models.     

Snow carrots after the Chelyabinsk event and model implications for highly porous solar system objects

After the catastrophic disruption of the Chelyabinsk meteoroid, small fragments formed funnels in the snow layer covering the ground. We constrain the pre‐impact characteristics of the fragments by simulating their atmospheric descent with the atmospheric entry model. Fragments resulting from catastrophic breakup may lose about 90% of their initial mass due to ablation and reach the snow vertically with a free‐fall velocity in the range of 30–90 m s^?1. The fall time of the fragments is much longer than their cooling time, and, as a consequence, fragments have the same temperature as the lower atmosphere, i.e., of about ?20 °C. Then, we use the shock physics code iSALE to model the penetration of fragments into fluffy snow, the formation of a funnel and a zone of denser snow lining its walls. We examine the influence of several material parameters of snow and present our best‐fit model by comparing funnel depth and funnel wall characteristics with observations. In addition, we suggest a viscous flow approximation to estimate funnel depth dependence on the meteorite mass. We discuss temperature gradient metamorphism as a possible mechanism which allows to fill the funnels with denser snow and to form the observed “snow carrots.” This natural experiment also helps us to calibrate the iSALE code for simulating impacts into highly porous matter in the solar system including tracks in the aerogel catchers of the Stardust mission and possible impact craters on the 67P/Churyumov‐Gerasimenko comet observed recently by the Rosetta mission.     

Solar Energetic Particle Events with Protons Above 500 MeV Between 1995 and 2015 Measured with SOHO/EPHIN

The Sun is an effective particle accelerator that produces solar energetic particle (SEP) events, during which particles of up to several GeVs can be observed. These events, when they are observed at Earth with the neutron monitor network, are called ground-level enhancements (GLEs). Although these events with their high-energy component have been investigated for several decades, a clear relation between the spectral shape of the SEPs outside the Earth’s magnetosphere and the increase in neutron monitor count rate has yet to be established. Hence, an analysis of these events is of interest for the space weather and for the solar event community.In this article, SEP events with protons accelerated to above 500 MeV were identified using data obtained with the Electron Proton Helium Instrument (EPHIN) onboard the Solar and Heliospheric Observatory (SOHO) between 1995 and 2015. For a statistical analysis, onset times were determined for the events and the proton energy spectra were derived and fitted with a power law.As a result, we present a list of 42 SEP events with protons accelerated to above 500 MeV measured with the EPHIN instrument onboard SOHO. The statistical analysis based on the fitted spectral slopes and absolute intensities is discussed, with special emphasis on whether an event has been observed as a GLE. Furthermore, we are able to determine that the derived intensity at 500 MeV and the observed increase in neutron monitor count rate are correlated for a subset of events.     

On Flare-CME Characteristics from Sun to Earth Combining Remote-Sensing Image Data with <Emphasis Type="Italic">In Situ</Emphasis> Measurements Supported by Modeling

We analyze the well-observed flare and coronal mass ejection (CME) from 1 October 2011 (SOL2011-10-01T09:18) covering the complete chain of effects – from Sun to Earth – to better understand the dynamic evolution of the CME and its embedded magnetic field. We study in detail the solar surface and atmosphere associated with the flare and CME using the Solar Dynamics Observatory (SDO) and ground-based instruments. We also track the CME signature off-limb with combined extreme ultraviolet (EUV) and white-light data from the Solar Terrestrial Relations Observatory (STEREO). By applying the graduated cylindrical shell (GCS) reconstruction method and total mass to stereoscopic STEREO-SOHO (Solar and Heliospheric Observatory) coronagraph data, we track the temporal and spatial evolution of the CME in the interplanetary space and derive its geometry and 3D mass. We combine the GCS and Lundquist model results to derive the axial flux and helicity of the magnetic cloud (MC) from in situ measurements from Wind. This is compared to nonlinear force-free (NLFF) model results, as well as to the reconnected magnetic flux derived from the flare ribbons (flare reconnection flux) and the magnetic flux encompassed by the associated dimming (dimming flux). We find that magnetic reconnection processes were already ongoing before the start of the impulsive flare phase, adding magnetic flux to the flux rope before its final eruption. The dimming flux increases by more than 25% after the end of the flare, indicating that magnetic flux is still added to the flux rope after eruption. Hence, the derived flare reconnection flux is most probably a lower limit for estimating the magnetic flux within the flux rope. We find that the magnetic helicity and axial magnetic flux are lower in the interplanetary space by ～?50% and 75%, respectively, possibly indicating an erosion process. A CME mass increase of 10% is observed over a range of \({\sim}\,4\,\mbox{--}\,20~\mathrm{R}_{\odot }\). The temporal evolution of the CME-associated core-dimming regions supports the scenario that fast outflows might supply additional mass to the rear part of the CME.     

Observations of a Radio-Quiet Solar Preflare

The preflare phase of the flare SOL2011-08-09T03:52 is unique in its long duration, in that it was covered by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) and the Nobeyama Radioheliograph, and because it showed three well-developed soft X-ray (SXR) peaks. No hard X-rays (HXR) are observed in the preflare phase. Here we report that no associated radio emission at 17 GHz was found either, despite the higher sensitivity of the radio instrument. The ratio between the SXR peaks and the upper limit of the radio peaks is higher by more than one order of magnitude than the ratio in regular flares. The result suggests that the ratio between acceleration and heating in the preflare phase was different than in regular flares. Acceleration to relativistic energies, if any, occurred with lower efficiency.     

Semi-active model predictive control for 3rd generation benchmark problem using smart dampers

A semi-active strategy for model predictive control (MPC), in which magneto-rheological dampers are used as an actuator, is presented for use in reducing the nonlinear seismic response of high-rise buildings. A multi-step predictive model is developed to estimate the seismic performance of high-rise buildings, taking into account of the effects of nonlinearity, time-variability, model mismatching, and disturbances and uncertainty of controlled system parameters by the predicted error feedback in the multi-step predictive model. Based on the predictive model, a Kalman-Bucy observer suitable for semi-active strategy is proposed to estimate the state vector from the acceleration and semi-active control force feedback. The main advantage of the proposed strategy is its inherent stability, simplicity, on-line real-time operation, and the ability to handle nonlinearity, uncertainty, and time-variability properties of structures. Numerical simulation of the nonlinear seismic responses of a controlled 20-story benchmark building is carried out, and the simulation results are compared to those of other control systems. The results show that the developed semi-active strategy can efficiently reduce the nonlinear seismic response of high-rise buildings.     

A diverse Pleistocene marsupial trackway assemblage from the Victorian Volcanic Plains,Australia

A diverse assemblage of late Pleistocene marsupial trackways on a lake bed in south-western Victoria provides the first information relating to the gaits and morphology of several megafaunal species, and represents the most speciose and best preserved megafaunal footprint site in Australia. The 60–110 ka volcaniclastic lacustrine sedimentary rocks preserve trackways of the diprotodontid Diprotodon optatum, a macropodid (probably Protemnodon sp.) and a large vombatid (perhaps Ramsayia magna or ‘Phascolomys’ medius) and possible prints of the marsupial lion, Thylacoleo carnifex. The footprints were imprinted within a short time period, demonstrating the association of the taxa present, rather than the time-averaged accumulations usually observed in skeletal fossil deposits. Individual manus and pes prints are distinguishable in some trackways, and in many cases some digital pad morphology is also present. Several parameters traditionally used to differentiate ichnotaxa, including trackway gauge and the degree of print in-turning relative to the midline, are shown to be subject to significant intraspecific variation in marsupials. Sexual dimorphism in the trackway proportions of Diprotodon, and its potential for occurrence in all large bodied, quadrupedal marsupials, is identified here for the first time.