Assessment of the influence of horizontal diaphragms on the seismic performance of vernacular buildings

The awareness and preservation of the vernacular heritage and traditional construction techniques and materials is crucial as a key element of cultural identity. However, vernacular architecture located in earthquake prone areas can show a particularly poor seismic performance because of inadequate construction practices resulting from economic restraints and lack of resources. The horizontal diaphragms are one of the key aspects influencing the seismic behavior of buildings because of their major role transmitting the seismic actions to the vertical resisting elements of the structure. This paper presents a numerical parametric study adopted to understand the seismic behavior and resisting mechanisms of vernacular buildings according to the type of horizontal diaphragm considered. Detailed finite element modeling and nonlinear static (pushover) analyses were used to perform the thorough parametric study aimed at the evaluation and quantification of the influence of the type of diaphragm in the seismic behavior of vernacular buildings. The reference models used for this study simulate representative rammed earth and stone masonry vernacular buildings commonly found in the South of Portugal. Therefore, this paper also contributes for a better insight of the structural behavior of vernacular earthen and stone masonry typologies under seismic loading.     

Comparison Between Stress and Strain Quantities of the Failure–Deformation Process of Fennoscandian Hard Rocks Using Geological Information

The aim of this paper was to compare the stress and strain quantities that are related to the failure–deformation process of hard rock. The data used here was obtained from laboratory uniaxial compression tests performed on different types of Fennoscandian hard rocks. The failure–deformation process quantities were compared at each deformation stage and for each single specimen. Moreover, geological information such as the rock origin process and the rock characteristics of the specimens were studied and linked to the stress and strain quantities. The purpose was to investigate the influence of the rock origin process and rock characteristics on these quantities. The main results of this study showed that the normalized crack damage lateral strain (ε _3cd/ε _3p ) and the volumetric strain (ε _crv?ci and ε _v?cd) quantities were strongly affected by the grain size. The normalized and volumetric quantities are weakly dependent on the mineral composition.     

Misperceptions of global climate change: information policies

Previous experimental studies have found that people generally misperceive the basic dynamics of renewable resources, and in particular the accumulation of greenhouse gases (GHGs) in the atmosphere. The purpose of the present laboratory experiment is to find out why people misperceive the dynamics of CO₂ accumulation and how misperceptions could be avoided. Using a simulator, 242 subjects were each asked to control total global emissions of CO₂ to reach a given target for the stock of CO₂ in the atmosphere. Consistent with previous investigations we find a strong tendency for people to overshoot the stated goal. Furthermore, our results point out that people need help to develop proper mental models of CO₂ accumulation and they need motivation to reconsider inappropriate decision heuristics. Based on these results and the literature on conceptual change a new information strategy is designed. To motivate, it imposes cognitive conflict; and to facilitate new understanding, it provides simple analogies. A new test shows promising learning effects. The results have important implications for the Intergovernmental Panel on Climate Change (IPCC), governments, and media covering the climatic change issue as well as for general education.     

From the Sun to the Earth: The 13 May 2005 Coronal Mass Ejection

We report the results of a multi-instrument, multi-technique, coordinated study of the solar eruptive event of 13 May 2005. We discuss the resultant Earth-directed (halo) coronal mass ejection (CME), and the effects on the terrestrial space environment and upper Earth atmosphere. The interplanetary CME (ICME) impacted the Earth’s magnetosphere and caused the most-intense geomagnetic storm of 2005 with a Disturbed Storm Time (Dst) index reaching ?263 nT at its peak. The terrestrial environment responded to the storm on a global scale. We have combined observations and measurements from coronal and interplanetary remote-sensing instruments, interplanetary and near-Earth in-situ measurements, remote-sensing observations and in-situ measurements of the terrestrial magnetosphere and ionosphere, along with coronal and heliospheric modelling. These analyses are used to trace the origin, development, propagation, terrestrial impact, and subsequent consequences of this event to obtain the most comprehensive view of a geo-effective solar eruption to date. This particular event is also part of a NASA-sponsored Living With a Star (LWS) study and an on-going US NSF-sponsored Solar, Heliospheric, and INterplanetary Environment (SHINE) community investigation.     

A Landsat-based evaluation of lake water clarity in Maine lakes

Temporal trends in water clarity and land-use/land-cover (LULC), as well as the relationship between changes in water clarity and LULC, were analyzed using water clarity values extracted from Landsat images from 1986 to 2008, acquired for east-central Maine. Of 40 lakes identified using satellite imagery, our analysis found one lake with a significant decrease in water clarity. In a second data-set, with 99 lakes, we identified two lakes with a significant increase in water clarity. Analyses of the relationship between temporal changes in the water clarity and LULC did not identify any clear, consistent, relationships between changes in the water quality variables and LULC. Overall, the results of this study aid in the identification of the relationship between water clarity and LULC, and identify temporal changes in water clarity. The findings of this study support the previous research that demonstrates the ability of satellite imagery to be used in assessments of water clarity, thus enabling evaluation at broader spatial scales and longer temporal scales than assessments that rely solely on ground-based data.     

Precipitate flotation of copper as the sulfide,using recyclable amphoteric surfactants

An experimental study was made to identify surfactants which are effective for removal of copper from dilute aqueous solution (100–500 ppm) by precipitate flotation as the sulfide, and which at the same time can be recovered from the CuS product for recycle. Batch flotation experiments confirmed that a cationic surfactant was necessary for flotation of CuS from such dilute suspensions; however, no satisfactory way could be found for recovering cationic surfactants from the CuS. This led to consideration of amphoteric surfactants, which are cationic at low pH and anionic at high pH. It was found that a change to negative, rather than simply neutral, charge was required for efficient surfactant recovery. It was further found, through the assistance of experiments in which the CuS suspension was agitated with solvents, that certain functional groups which interact chemically with the CuS surface should also be absent from the surfactant molecule. Following this logic, Amphoterge K-2 (Lonza Chemical Co.) was identified as a suitable surfactant, provided CuS was precipitated with S^2? in excess. Tests established that 95% of adsorbed Amphoterge K-2 could be recovered by raising the pH to 11 and boiling the suspension for one hour, followed by decanting. Surfactant thus recovered was effective in a second flotation test. Foamate solids settled rapidly; such behavior would help reduce the consumption of chemicals for the pH change.Column flotation studies were made using Amphoterge K-2 for removal of Cu²⁺ present at 100 ppm and pH = 2. High removals of CuS could be obtained at concentrations of surfactant above about 25 ppm, for which conditions a substantial fraction of the surfactant remains in solution rather than being adsorbed onto the CuS. The recovery of CuS would be improved by introducing the surfactant in a separate feed, below the feed of CuS suspension. Adding some surfactant in the CuS feed, as well as in a lower feed, gave an even better recovery of CuS (99.8%) at sufficiently high surfactant loadings.     

Quantifying multiple Permian–Recent exhumation events during the break‐up of eastern Gondwana: sonic transit time analysis of the central and southern Perth Basin

The central and southern Perth Basin in southwestern Australia has a geological history involving multiple regional unconformity‐forming events from the Permian to Recent. This study uses sonic transit time analysis to quantify the magnitudes of net and gross exhumation for four stratigraphic periods from 43 wells. Most importantly, we quantify gross exhumation of the Permian–Triassic, Triassic–Jurassic, Valanginian break‐up and post‐Early Cretaceous events. Post‐Early Cretaceous gross exhumation averages 900‐m offshore and 600‐m onshore. Up to 200 m of this exhumation may be attributed to localized fault block rotation during extension in the Late Cretaceous and/or reverse fault re‐activation due to the compressive stresses in Australia in the last 50 Ma. The remainder is attributed to regional exhumation caused by epeirogenic processes either during the Cenozoic or at the Aptian–Albian boundary. Maximum burial depths prior to the Valanginian unconformity‐forming event were less than those reached subsequently, so that the magnitude of Valanginian break‐up exhumation cannot be accurately quantified. Gross exhumation prior to the break‐up of Gondwana was defined by large magnitude differences (up to 2500 m) between adjoining sub‐basins. At the end of Triassic, exhumation is primarily attributed to reverse re‐activation of faults that were driven by short‐wavelength inversion and exhumation at the end Permian is likely caused by uplift of rotated fault blocks during extension. The evidence from quantitative exhumation analysis indicates a switch in regime, from locally heterogeneous before break‐up to more regionally homogeneous after break‐up.     

Managed water levels and the expansion of emergent vegetation along a lakeshore

Water-level fluctuations may be used to promote the expansion of emergent vegetation along lakeshores. We present the case of the lake Volkerak-Zoommeer in the Netherlands, a fresh-water lake created in 1987 after the enclosure of an estuary. Using an experimental area in which the water level could be manipulated, it was shown that partial summer drawdown of the shoreline created suitable conditions for germination and growth of tall emergent species (in particular Phragmites australis). Plant survival and growth depended on subsequent water-level fluctuations and grazing by waterbirds. Based on the experiment and empirical data, a model was developed to predict the effects of the water-level regime on potential reed bed development. The model was applied for four hydrological scenarios that have been considered for the water-level management of the lake.