In situ methods for measuring thermal properties and heat flux on planetary bodies

The thermo-mechanical properties of planetary surface and subsurface layers control to a high extent in which way a body interacts with its environment, in particular how it responds to solar irradiation and how it interacts with a potentially existing atmosphere. Furthermore, if the natural temperature profile over a certain depth can be measured in situ, this gives important information about the heat flux from the interior and thus about the thermal evolution of the body. Therefore, in most of the recent and planned planetary lander missions experiment packages for determining thermo-mechanical properties are part of the payload. Examples are the experiment MUPUS on Rosetta's comet lander Philae, the TECP instrument aboard NASA's Mars polar lander Phoenix, and the mole-type instrument HP³ currently developed for use on upcoming lunar and Mars missions. In this review we describe several methods applied for measuring thermal conductivity and heat flux and discuss the particular difficulties faced when these properties have to be measured in a low pressure and low temperature environment. We point out the abilities and disadvantages of the different instruments and outline the evaluation procedures necessary to extract reliable thermal conductivity and heat flux data from in situ measurements.     

Denudation of the Côte d'Ivoire-Ghana transform continental margin from apatite fission tracks

Apatite fission track analysis of samples from the shoulder (marginal ridge) of the Côte d'Ivoire-Ghana transform continental margin reveal a cooling of the margin between 85 and 65 Ma for the central and eastern parts of the ridge. All samples were heated in situ during sedimentary burial with a temperature >120 °C, except for two samples located in the eastern part which were heated between 105 and 120 °C. For the first time, age/depth diagram along a transform margin shows a shape involving erosion starting at the bottom of the continental slope, then stepping backwards towards the edge of the slope. This retrogressive erosion can result from the deepening of the lithospheric plate sliding along the transform margin, from thick continental crust to thin continental crust, and finally to oceanic crust. This process could be at the origin of the shoulder uplift by flexural response to the important crustal discharge (>2 km).     

Water production and release in Comet 153P/Ikeya-Zhang (C/2002 C1): accurate rotational temperature retrievals from hot-band lines near 2.9-μm

Multiple non-resonance fluorescence lines of water (H₂O) were detected in Comet 153/P Ikeya-Zhang (2002 C1) between UT 2002 March 21.9 (R_h=0.51 AU) and April 13.9 (R_h=0.78 AU), using the Cryogenic Echelle Spectrometer (CSHELL) at the NASA Infrared Telescope Facility. Analysis of 2.9-μm water lines enabled accurate determination of rotational temperatures on three dates. The derived H₂O rotational temperatures were 138⁺⁶₋₅, 141⁺¹⁰₋₉, and 94±3 K on UT 2002 March 22.0, March 23.0, and April 13.8, respectively. Water production rates were retrieved from spectral lines measured in nineteen separate grating settings over seven observing periods. The derived heliocentric dependence of the water production rate was Q=(9.2±1.1)×10²⁸[R_h^{(−3.21±0.26)}] molecules s⁻¹. The spatial distribution of H₂O in the coma was consistent with its release directly from the nucleus (as a native source) on all dates.     

Miocene to Recent exhumation of the central Himalaya determined from combined detrital zircon fission-track and U/Pb analysis of Siwalik sediments, western Nepal

Fission‐track (FT) analysis of detrital zircon from synorogenic sediment is a well‐established tool to examine the cooling and exhumation history of convergent mountain belts, but has so far not been used to determine the long‐term evolution of the central Himalaya. This study presents FT analysis of detrital zircon from 22 sandstone and modern sediment samples that were collected along three stratigraphic sections within the Miocene to Pliocene Siwalik Group, and from modern rivers, in western and central Nepal. The results provide evidence for widespread cooling in the Nepalese Himalaya at about 16.0±1.4 Ma, and continuous exhumation at a rate of about 1.4±0.2 km Myr^?1 thereafter. The ～16 Ma cooling is likely related to a combination of tectonic and erosional activity, including movement on the Main Central thrust and Southern Tibetan Detachment system, as well as emplacement of the Ramgarh thrust on Lesser Himalayan sedimentary and meta‐sedimentary units. The continuous exhumation signal following the ～16 Ma cooling event is seen in connection with ongoing tectonic uplift, river incision and erosion of lower Lesser Himalayan rocks exposed below the MCT and Higher Himalayan rocks in the hanging wall of the MCT, controlled by orographic precipitation and crustal extrusion. Provenance analysis, to distinguish between Higher Himalayan and Lesser Himalayan zircon sources, is based on double dating of individual zircons with the FT and U/Pb methods. Zircons with pre‐Himalayan FT cooling ages may be derived from either nonmetamorphic parts of the Tethyan sedimentary succession or Higher Himalayan protolith that formerly covered the Dadeldhura and Ramgarh thrust sheets, but that have been removed by erosion. Both the Higher and Lesser Himalaya appear to be sources for the zircons that record either ～16 Ma cooling or the continuous exhumation afterwards.     

Contributing Factors to Disease Outbreaks Associated with Untreated Groundwater

Disease outbreaks associated with drinking water drawn from untreated groundwater sources represent a substantial proportion (30.3%) of the 818 drinking water outbreaks reported to CDC's Waterborne Disease and Outbreak Surveillance System (WBDOSS) during 1971 to 2008. The objectives of this study were to identify underlying contributing factors, suggest improvements for data collection during outbreaks, and inform outbreak prevention efforts. Two researchers independently reviewed all qualifying outbreak reports (1971 to 2008), assigned contributing factors and abstracted additional information (e.g., cases, etiology, and water system attributes). The 248 outbreaks resulted in at least 23,478 cases of illness, 390 hospitalizations, and 13 deaths. The majority of outbreaks had an unidentified etiology (n = 135, 54.4%). When identified, the primary etiologies were hepatitis A virus (n = 21, 8.5%), Shigella spp. (n = 20, 8.1%), and Giardia intestinalis (n = 14, 5.7%). Among the 172 (69.4%) outbreaks with contributing factor data available, the leading contamination sources included human sewage (n = 57, 33.1%), animal contamination (n = 16, 9.3%), and contamination entering via the distribution system (n = 12, 7.0%). Groundwater contamination was most often facilitated by improper design, maintenance or location of the water source or nearby waste water disposal system (i.e., septic tank; n = 116, 67.4%). Other contributing factors included rapid pathogen transport through hydrogeologic formations (e.g., karst limestone; n = 45, 26.2%) and preceding heavy rainfall or flooding (n = 36, 20.9%). This analysis underscores the importance of identifying untreated groundwater system vulnerabilities through frequent inspection and routine maintenance, as recommended by protective regulations such as Environmental Protection Agency's (EPA's) Groundwater Rule, and the need for special consideration of the local hydrogeology.     

Potential climate change impacts on the probability of wind damage in a south Swedish forest

We estimated how the possible changes in wind climate and state of the forest due to climate change may affect the probability of exceeding critical wind speeds expected to cause wind damage within a forest management unit located in Southern Sweden. The topography of the management unit was relatively gentle and the forests were dominated by Norway spruce (Picea abies (L.) Karst.). We incorporated a model relating the site index (SI) to the site productivity into the forest projection model FTM. Using estimated changes in the net primary production (NPP) due to climate change and assuming a relative change in NPP equal to a relative change in the site productivity, we simulated possible future states of the forest under gradual adjustment of SI in response to climate change. We estimated changes in NPP by combining the boreal-adapted BIOMASS model with four regional climate change scenarios calculated using the RCAO model for the period 2071–2100 and two control period scenarios for the period 1961–1990. The modified WINDA model was used to calculate the probability of wind damage for individual forest stands in simulated future states of the forest. The climate change scenarios used represent non-extreme projections on a 100-year time scale in terms of global mean warming. A 15–40% increase in NPP was estimated to result from climate change until the period 2071–2100. Increasing sensitivity of the forest to wind was indicated when the management rules of today were applied. A greater proportion of the calculated change in probability of wind damage was due to changes in wind climate than to changes in the sensitivity of the forest to wind. While regional climate scenarios based on the HadAM3H general circulation model (GCM) indicated no change (SRES A2 emission scenario) or a slightly reduced (SRES B2 emission scenario) probability of wind damage, scenarios based on the ECHAM4/OPYC3 GCM indicated increased probability of wind damage. The assessment should, however, be reviewed as the simulation of forest growth under climate change as well as climate change scenarios are refined.     

The probability of wind damage in forestry under a changed wind climate

We (1) estimated how the possible changes in wind climate due to climatic change may affect the probability of exceeding critical wind speeds (CWS) expected to cause significant wind damage within a forest management unit located in southern Sweden, (2) analysed how the probability of exceeding an approximate CWS as observed in the management unit would change in different regions in Sweden if expecting a similar kind of forested area to occur in different geographical locations. The topography of the management unit was relatively gentle and the forests were dominated by Norway spruce (Picea abies (L.) Karst.). Seven regions across Sweden were selected for comparison of possible future probability of damaging wind speed. The model-system WINDA was modified and used for calculations of the probability of wind damage together with regionally downscaled climate change scenario (CCS) data. In total, two climate scenarios downscaled using the RCAO model for the control period 1961–1990 and four for the period 2071–2100 were used. The CCSs represent fairly central projections on a 100-year time scale in terms of global mean warming. Although there is ambiguity between different CCSs, the results indicated that the present pattern of more windy conditions in southern than in northern Sweden will remain. For most sites the probability of exceeding the CWS from westerly to south-westerly directions was indicated to remain comparatively high and the probability of damaging wind from south-westerly to south-easterly directions was indicated to increase in many places. For southernmost Sweden increasing probability of exceeding the CWS from the north-westerly to south-easterly wind directions were indicated for all but one CCS. The results were discussed with respect to spatial planning in forestry under a changing wind climate.     

Anthrosols in Iron Age Shetland: Implications for arable and economic activity

The soils surrounding three Iron Age settlements on South Mainland, Shetland, were sampled and compared for indicators of soil amendment. Two of the sites (Old Scatness and Jarlshof) were on lower‐lying, better‐drained, sheltered land; the third (Clevigarth) was in an acid, exposed environment at a higher elevation. The hypothesis, based on previous regional assessments, soil thicknesses, and excavations at Old Scatness, was that the lowland sites would have heavily fertilized soils and that the thin upland soil would show little if any amendment. Our findings indicate that the Middle Iron Age soils at Old Scatness had extremely high phosphorus levels, while the soil at Jarlshof had lower levels of enhancement. At Clevigarth, where charcoal from the buried soil was 14C dated to the Neolithic and Bronze Age, there was no evidence of arable activity or soil amendment associated with the Iron Age phases of settlement. These observations indicate that not all sites put the same amount of effort into creating rich arable soils. The three sites had very different agricultural capacities, which suggests the emergence of local trade in agricultural commodities in Iron Age Shetland. © 2008 Wiley Periodicals, Inc.     

Zeittafel

Ohne Zusammenfassung