Fusion of multi‐resolution surface (terrestrial laser scanning) and subsurface geodata (ERT,SRT) for karst landform investigation and geomorphometric quantification

A multi‐method research design based on terrestrial laser scanning, GIS, geophysical prospecting (electrical resistivity tomography, refraction seismics) and sedimentology is applied for the first time to investigate enclosed karst depressions in an integrated way. Fusing multi‐resolution surface and subsurface geodata provides profound insights into the formation, geometry and geomorphologic processes of dolines. The studied landforms, which are located in the Dikti Mountains of East Crete, are shown to be filled by loose sediments of thicknesses of up to 30 m that mainly consist of fine‐grained material overlying solid bedrock at depths below 35 to 45 m. By combining subsurface observations with geomorphometric calculations, local doline genesis can be traced back to initial collapse of fractured bedrock followed by subsequent infilling with colluvials. In order to define crucial methodological requirements and guidelines for data fusion, both the impact of different elevation models and the influence of data resolution are assessed. Surface volumes of depressions derived by the digital surface model are 7–21% higher than the results obtained from the terrain model due to vegetation. Similarly, estimates of infill volume calculated on the basis of geophysical outcomes and elevation data differ by up to 13%. Calculations of the landforms' current volumes (i.e. total surface and subsurface volume), however, are fairly insensitive to raster resolution. Hence, the distinct geomorphologic properties of landforms (e.g. shape, terrain roughness, slope inclination) substantially determine the geomorphometric analysis of both surface and subsurface data. As shown by the findings, data fusion to integrate digital terrain, geophysical and sedimentological datasets of varied resolutions benefits geomorphologic studies and helps provide a comprehensive image of landforms. Copyright © 2013 John Wiley & Sons, Ltd.     

Electrical resistivity imaging of hydrologic flow through surface coal mine valley fills with comparison to other landforms

Surface coal mining has altered land cover, near‐surface geologic structure, and hydrologic processes of large areas in central Appalachia, USA. These alterations are associated with changes in water quality such as elevated total‐dissolved solids, which is usually measured via its surrogate, specific conductance (SC). The SC of valley fill effluent streams is a function of fill construction methods, materials, and age; yet hydrologic studies that relate these variables to water quality are sparse due to the difficulty of conducting traditional hydrologic studies in mined landscapes. We used electrical resistivity imaging (ERI) to visualize the subsurface geologic structure and hydrologic flow paths within a valley fill. ERI is a noninvasive geophysical technique that maps spatiotemporal changes in resistivity of the subsurface. We paired ERI with artificial rainfall experiments to track infiltrated water as it moved through the valley fill. Results indicate that ERI can be used to identify subsurface geologic structure and track advancing wetting fronts or preferential flow paths. Our results suggest that the upper portion of the fill contains significant fines, whereas the deeper profile is primarily large rocks and void spaces. Water tended to pond on the surface of compacted areas until it reached preferential flow paths, where it appeared to infiltrate quickly down to >15 m depth in 75 min. ERI applications can improve understanding of how fill construction techniques influence subsurface water movement, and in turn may aid in the development of valley fill construction methods to reduce water quality effects.     

Beobachtungen über die Eientwicklung des Blaufelchens (Coregonus lavaretus wartmanni) im Bodensee-Obersee

Lake Constance whitefish (Coregonus lavaretus wartmanni) spawn in the water column. The demersal eggs develop at the mud-water interface at depths down to 250 m. Samples were taken by dredging areas of 100 m². Mortality, developmental stages and rate of malformations were determined. Incubation period lasts roughly from December to March. The percentage of dead eggs increased from 52% in January to 74% in February. Among living eggs deformations of the trunk raised from 4% to 31% during the same time. It is assumed that larvae with anomalities of the trunk will have no survival chances. Total losses were 91.7% in the average of all samples.      

Trophic modeling of the Northern Humboldt Current Ecosystem, Part II: Elucidating ecosystem dynamics from 1995 to 2004 with a focus on the impact of ENSO

The Northern Humboldt Current Ecosystem is one of the most productive in the world in terms of fish production. Its location near to the equator permits strong upwelling under relatively low winds, thus creating optimal conditions for the development of plankton communities. These communities ultimately support abundant populations of grazing fish such as the Peruvian anchoveta, Engraulis ringens. The ecosystem is also subject to strong inter-annual environmental variability associated with the El Niño Southern Oscillation (ENSO), which has major effects on nutrient structure, primary production, and higher trophic levels. Here our objective is to model the contributions of several external drivers (i.e. reconstructed phytoplankton changes, fish immigration, and fishing rate) and internal control mechanisms (i.e. predator-prey) to ecosystem dynamics over an ENSO cycle. Steady-state models and time-series data from the Instituto del Mar del Perú (IMARPE) from 1995 to 2004 provide the base data for simulations conducted with the program Ecopath with Ecosim. In simulations all three external drivers contribute to ecosystem dynamics. Changes in phytoplankton quantity and composition (i.e. contribution of diatoms and dino- and silicoflagellates), as affected by upwelling intensity, were important in dynamics of the El Niño of 1997–98 and the subsequent 3 years. The expansion and immigration of mesopelagic fish populations during El Niño was important for dynamics in following years. Fishing rate changes were the most important of the three external drivers tested, helping to explain observed dynamics throughout the modeled period, and particularly during the post-El Niño period. Internal control settings show a mix of predator–prey control settings; however a “wasp-waist” control of the ecosystem by small pelagic fish is not supported.     

150 Jahre Geologie

Ohne ZusammenfassungVortrag, gehalten am 29. Juni 1935 in Bad Ems auf den Hauptversammlungen des Naturhistorischen Vereins der Rheinlande und Westfalens, des Niederrheinischen Geologischen Vereins und des Botanischen und Zoologischen Vereins für Rheinland-Westfalen.     

Erinnerung an Werner

Ohne Zusammenfassung     

A Light Portable Steam-driven Ice Drill Suitable for Drilling Holes in Ice and Firn

The purpose of this contribution is to explain the characteristics of a newly developed ice drill which is particularly geared to the needs of glaciologists. It is primarily designed for drilling holes for ablation stakes and for measuring water levels or temperatures in firn areas. Its distinguishing features are its light weight, making it easy to carry even over long distances, and the variety of tasks to which it can be adjusted. Furthermore, it is easy to operate even by one person.
Water is heated in a boiler by two gas flames to produce steam, which flows through an insulated hose to a nozzle. When the valve is opened the issuing steam condenses, and the heat released in the process melts the ice. The heater is constructed in such a way that it can easily be adapted to any form of gas supply locally available. It can be used for drilling in ice as well as in firn. The maximum drilling depth is 13 m in ice and 30 m in firn; hole diameters range from 25 to 45 mm. Mean drilling time is 16 min for 6 m, 35 min for 12 m in ice. The total weight is somewhat less than 16 kg, including all parts needed for drilling holes of 10 m in depth as well as the gas supply for one day. In recent years, devices of this type have been used successfully by scientists in various glaciated regions.     

Field Sampling of Residual Aviation Gasoline in Sandy Soil

Two complementary field sampling methods for the determination of residual aviation gasoline content in the contaminated capillary fringe of a fine, uniform, sandy soil were investigated. The first method featured field extrusion of core barrels into pint-size Mason jars, while the second consisted of laboratory partitioning of intact stainless steel core sleeves. The barrel extrusion procedure involved jar headspace sampling in a nitrogen-filled glove box, which delineated the 0.7m thick residually contaminated interval for subsequent core sleeve withdrawal from adjacent boreholes. Soil samples removed from the Mason jars (in the field) and sleeve segments (in the laboratory) were subjected to methylene chloride extraction and gas chromatographic analysis to compare their aviation gasoline content. The barrel extrusion sampling method yielded a vertical profile with 0.10m resolution over an essentially continuous 5.0m interval from the ground surface to the water table. The sleeve segment alternative yielded a more resolved 0.03m vertical profile over a shorter 0.8m interval through the capillary fringe. The two methods delivered precise estimates of the vertically integrated mass of aviation gasoline at a given horizontal location, and a consistent view of the vertical profile as well. In the latter regard, a 0.2m thick lens of maximum contamination was found in the center of the capillary fringe, where moisture filled all voids smaller than the mean pore size. The maximum peak was resolved by the core sleeve data, but was partially obscured by the barrel extrusion observations, so that replicate barrels or a half-pint Mason jar size should be considered for data supporting vertical transport analyses in the absence of sleeve partitions.