Petrogenesis of Sierra Nevada plutons inferred from the Sr, Nd, and O isotopic signatures of mafic igneous complexes in Yosemite Valley, California

Mafic complexes in the central Sierra Nevada batholith record valuable geochemical information regarding the role mafic magmas play in arc magmatism and the generation of continental crust. In the intrusive suite of Yosemite Valley, major and trace element compositions of the hornblende-bearing gabbroic rocks from the Rockslides mafic complex and of the mafic dikes in the North America Wall are compositionally similar to high-alumina basalt. Of these rocks, two samples have higher Ni and Cr abundances as well as higher ε_Nd values than previously recognized for the intrusive suite. Plagioclase crystals in rocks from the North America Wall and the Rockslides have prominent calcic cores and sharply defined sodic rims, a texture commonly associated with mixing of mafic and felsic magmas. In situ analyses of ⁸⁷Sr/⁸⁶Sr in plagioclase show no significant isotopic difference from the cores to the rims of these grains. We propose that the high ⁸⁷Sr/⁸⁶Sr (~0.7067) and low ε_Nd (~?3.4) of bulk rocks, the homogeneity of ⁸⁷Sr/⁸⁶Sr in plagioclase, and the high δ¹⁸O values of bulk rocks (6.6–7.3 ‰) and zircon (Lackey et al. in J Petrol 49:1397–1426, 2008) demonstrate that continental crust was assimilated into the sublithospheric mantle-derived basaltic precursors of the mafic rocks in Yosemite Valley. Contamination (20–40 %) likely occurred in the lower crust as the magma differentiated to high-alumina basalt prior to plagioclase (and zircon) crystallization. As a consequence, the isotopic signatures recorded by whole rocks, plagioclase, and zircon do not represent the composition of the underlying lithospheric mantle. We conclude that the mafic and associated felsic members of the intrusive suite of Yosemite Valley represent 60–80 % new additions to the crust and include significant quantities of recycled ancient crust.     

Geological and thermochronological studies of the Dashui gold deposit, West Qinling Orogen, Central China

The Dashui gold deposit is a structurally controlled, Carlin-type gold deposit hosted by recrystallised limestone in the West Qinling Orogen of Central China. The major, structurally late east-trending Dashui Fault forms the hanging wall to the gold mineralisation at the Dashui mine and defines the contact between Middle Triassic limestone and a steeply dipping overlying succession of Middle Triassic argillaceous limestone, dolomite, and sandstone. Multiple carbonate veins and large-scale supergene enrichment, represented by hematite, goethite, limonite and jarosite, characterise the deposit. Detailed geochronological investigation using zircon SHRIMP U-Pb dating reveals that volcanic rocks closely associated with the Dashui gold deposit were synchronous with the Ge’erkuohe Granite and pre-date mineralisation. The igneous dyke sample from the hanging wall has the same U-Pb zircon age as the footwall, ca. 213 Ma. (U-Th)/He thermochronology on dykes in the hanging wall and footwall of the Dashui Fault yields identical (U-Th)/He zircon ages of ca. 210 Ma but distinct (U-Th)/He apatite ages of ca. 136 and 211 Ma, respectively. Therefore, the hanging wall and footwall are interpreted as having distinct post-mineralisation exhumation histories. Reverse fault movement exhumed the hanging wall ~2 to 4 km since the Late Triassic with the main component of faulting taking place between the Late Triassic and Early Cretaceous. These relationships suggest a Late Triassic to Early Cretaceous age for the primary gold mineralisation at the Dashui gold deposit, with the corollary that any ‘missing portion’ of the deposit, previously hypothesised to exist in the hanging wall of the Dashui Fault, has been eroded away. The mineralisation in the footwall may have been supergene enriched soon after the primary mineralisation was emplaced, because it has been located at shallow depth since the Late Triassic. Semi-quantitative results obtained in this study also constrain the maximum depth of formation of the Dashui gold at no more than 2 km.     

Distributed deformation around the eastern tip of the Kunlun fault

Whether active strain within the Indo-Asian collision zone is primarily localized along major strike-slip fault systems or is distributed throughout the intervening crust between faults remains uncertain. Despite refined estimates of slip rates along many of the major fault zones, relatively little is known about how displacement along these structures is accommodated at fault terminations. Here, we show that a systematic decrease in left-lateral slip rates along the eastern ~200 km of the Kunlun fault, from >10 mm/year to <1 mm/year, is coincident with high topography in the Anyemaqen Shan and with a broad zone of distributed shear and clockwise vorticity within the Tibetan Plateau. Geomorphic analysis of river longitudinal profiles, coupled with inventories of cosmogenic radionuclides in fluvial sediment, reveal correlated variations in fluvial relief and erosion rate across the Anyemaqen Shan that reflect ongoing differential rock uplift across the range. Our results imply that the termination of the Kunlun fault system is accommodated by a combination of distributed crustal thickening and by clockwise rotation of the eastern fault segments.     

Paleogeographical restoration and ramp tectonic evidence in Tunisian Tellian domain: Ain El Bey-Bou Awen area

The imbrication’s area in northern Tunisia is the most external segment of Alpine range, where several associated folds types with thrust ramps are recognized within imbricate units beneath Numidian front slope. Their presence help to understand thrusting mechanisms installation through studied area. In fact, this zone was considered as a result of Paleogene gravitary slop (Kujawski (Ann Miner Géol Tunis (24):281, 1969); Caire (Ann Min Géol Tunis 26:87–110, 1973); Rouvier 1977), which is proved to be affected by major deep decollement, given rise to various structures, some are propagation folds, specific of foreland front, limited to this area, and those in more external position: Tunisian Atlas (Creusot et al. (C R Acad Sci Paris 314(Sér II):961–965, 1992); Ouali and Mercier (PII: S0191-8141(97):00048-5, 1997); Ouali 1984; Ahmadi et al. (J Struct Geol 28:721–728, 2006)). Various categories of fold ramps could be identified: frontal folds ramp NE–SW and others as lateral or oblique ramp with NW–SE trend (Aridhi et al. (C R Geosci 343:360–369, 2011)). The relation between various structures has been used as recognition tools of thrusting sequences and to propose a new deformation chronology. Delimited outcropping of these structures between two both parallel faults strikes with regional displacement, leads to interpret these faults as cogenetic tear faults of propagation thrusts; this fault separates two domains with different deformation styles from each other side.     

Evaluating vegetative transplant success in Posidonia australis: a field trial with habitat enhancement

Seagrasses in Western Australia grow on open coastlines that are wave and surge exposed, which are known to reduce transplant success. This study investigated the use of habitat enhancement procedures to improve the survival and expansion of Posidonia australis transplants. Limited success transplanting P. australis vegetative propagules (plugs) was achieved after habitat enhancement was implemented, using artificial seagrass (ASG) mats to emulate a "surrogate" seagrass meadow. The ASG mats enhanced one aspect of the habitat (stabilised sediment grain size) but did not suitably stabilise erosion and accretion. Transplant survival was significantly increased (up to 50% survival) in 60% of the sites where ASG mats were present. However, only 8% of the total transplant population exhibited rhizome extension (3.2+/-0.11 mmd(-1)).     

The Oligocene Lund Tuff, Great Basin, USA: a very large volume monotonous intermediate

Unusual monotonous intermediate ignimbrites consist of phenocryst-rich dacite that occurs as very large volume (>1000 km³) deposits that lack systematic compositional zonation, comagmatic rhyolite precursors, and underlying plinian beds. They are distinct from countless, usually smaller volume, zoned rhyolite–dacite–andesite deposits that are conventionally believed to have erupted from magma chambers in which thermal and compositional gradients were established because of sidewall crystallization and associated convective fractionation. Despite their great volume, or because of it, monotonous intermediates have received little attention. Documentation of the stratigraphy, composition, and geologic setting of the Lund Tuff – one of four monotonous intermediate tuffs in the middle-Tertiary Great Basin ignimbrite province – provides insight into its unusual origin and, by implication, the origin of other similar monotonous intermediates.The Lund Tuff is a single cooling unit with normal magnetic polarity whose volume likely exceeded 3000 km³. It was emplaced 29.02±0.04 Ma in and around the coeval White Rock caldera which has an unextended north–south diameter of about 50 km. The tuff is monotonous in that its phenocryst assemblage is virtually uniform throughout the deposit: plagioclase>quartz≈hornblende>biotite>Fe–Ti oxides≈sanidine>titanite, zircon, and apatite. However, ratios of phenocrysts vary by as much as an order of magnitude in a manner consistent with progressive crystallization in the pre-eruption chamber. A significant range in whole-rock chemical composition (e.g., 63–71 wt% SiO₂) is poorly correlated with phenocryst abundance.These compositional attributes cannot have been caused wholly by winnowing of glass from phenocrysts during eruption, as has been suggested for the monotonous intermediate Fish Canyon Tuff. Pumice fragments are also crystal-rich, and chemically and mineralogically indistinguishable from bulk tuff. We postulate that convective mixing in a sill-like magma chamber precluded development of a zoned chamber with a rhyolitic top or of a zoned pyroclastic deposit. Chemical variations in the Lund Tuff are consistent with equilibrium crystallization of a parental dacitic magma followed by eruptive mixing of compositionally diverse crystals and high-silica rhyolite vitroclasts during evacuation and emplacement. This model contrasts with the more systematic withdrawal from a bottle-shaped chamber in which sidewall crystallization creates a marked vertical compositional gradient and a substantial volume of capping-evolved rhyolite magma. Eruption at exceptionally high discharge rates precluded development of an underlying plinian deposit.The generation of the monotonous intermediate Lund magma and others like it in the middle Tertiary of the western USA reflects an unusually high flux of mantle-derived mafic magma into unusually thick and warm crust above a subducting slab of oceanic lithosphere.     

Control of sediment dynamics by vegetation as a key function driving biogeomorphic succession within fluvial corridors

Riparian vegetation responds to hydrogeomorphic disturbances and environmental changes and also controls these changes. Here, we propose that the control of sediment erosion and deposition by riparian vegetation is a key geomorphological and ecological (i.e. biogeomorphic) function within fluvial corridors. In a 3 year study, we investigated the correlations between riparian vegetation and hydrogeomorphic dynamics along a transverse gradient from the main channel to the floodplain of the River Tech, France. Sediment erosion and deposition rates varied significantly along the transverse gradient as a function of the vegetation biovolume intercepting water flow. These effects, combined with the extremely strong mechanical resistance of pioneer woody structures and strong resilience of pioneer labile herbaceous communities, Populus nigra and Salix spp., explain the propensity of biogeomorphic succession (i.e. the synergy between vegetation succession and landform construction) to progress between destructive floods. This geomorphological function newly identified as an ‘ecosystem function’ per se encompasses the coupling of habitat and landform creation, maintenance and change with fundamental ecosystem structural changes in space and in time. Three different biogeomorphic functions, all related to the concept of ecosystem engineering, were identified: (i) the function of pioneer herbaceous communities to retain fine sediment and diaspores in the exposed zones of the active tract near the water resource, facilitating recruitment of further herbaceous and Salicacea species; (ii) the function of woody vegetation to drive the construction of forested islands and floodplains; and (iii) the function of stabilised riparian forests to act as ‘diversity reservoirs’ which can support regeneration after destructive floods. Overall, this study based on empirical data points to the fundamental importance of sediment flow control by pioneer riparian vegetation in defining fluvial ecosystem and landform organisation in time and in space. Copyright © 2009 John Wiley & Sons, Ltd.