Estimating longitudinal dispersion in rivers using Acoustic Doppler Current Profilers

The longitudinal dispersion coefficient (D) is an important parameter needed to describe the transport of solutes in rivers and streams. The dispersion coefficient is generally estimated from tracer studies but the method can be expensive and time consuming, especially for large rivers. A number of empirical relations are available to estimate the dispersion coefficient; however, these relations are known to produce estimates within an order of magnitude of the tracer value. The focus of this paper is on using the shear-flow dispersion theory to directly estimate the dispersion coefficient from velocity measurements obtained using an Acoustic Doppler Current Profiler (ADCP). Using tracer and hydrodynamic data collected within the same river reaches, we examined conditions under which the ADCP and tracer methods produced similar results. Since dead zones / transient storage (TS) are known to influence the dispersion coefficient, we assessed the relative importance of dead zones in different stream reaches using two tracer-based approaches: (1) TS modeling which explicitly accounts for dead zones and (2) the advection–dispersion equation (ADE) which does not have separate terms for dead zones. Dispersion coefficients based on the ADE tend to be relatively high as they describe some of the effects of dead zones as well. Results based on the ADCP method were found to be in good agreement with the ADE estimates indicating that storage zones play an important role in the estimated dispersion coefficients, especially at high flows. For the river sites examined in this paper, the tracer estimates of dispersion were close to the median values of the ADCP estimates obtained from multiple datasets within a reach. The ADCP method appears to be an excellent alternative to the traditional tracer-based method if care is taken to avoid spurious data and multiple datasets are used to compute a distance-weighted average or other appropriate measure that represents reach-averaged conditions.     

Application of a finite element model to the computation of tides in the Mersey Estuary and Eastern Irish Sea

A variable mesh finite element model of the Irish and Celtic Sea regions with/without the inclusion of the Mersey estuary is used to examine the influence of grid resolution and the Mersey upon the higher harmonics of the tide in the region. Comparisons are made with observations and published results from finite difference models of the area. Although including a high resolution representation of the Mersey had little effect upon computed tides in the western Irish Sea it had a significant effect upon tidal currents in the eastern Irish Sea. In addition the higher harmonics of the M₂ tide in near-shore regions of the eastern Irish Sea particularly the Solway and Mersey estuary together with Morecambe Bay showed significant small scale variability. The Mersey was used to test the sensitivity to including estuaries because high resolution accurate topography was available. The results presented here suggest that comparable detailed topographic data sets are required in all estuaries and near-shore regions. In addition comparisons clearly show the need for an unstructured grid model of the region that can include all the estuaries. Such an unstructured grid solution was developed here within a finite element approach, although other methods in particular the finite volume, or coordinate transformations/curvilinear grids and nesting could be applied.     

Lunar noise correlation,imaging and monitoring

Passive seismic techniques have revolutionarised seismology,leading for example to increased resolution in surface wave tomography,to the possibility to monitor changes in the propagation medium,and to many new processing strategies in seismic exploration.Here we review applications of the new techniques to a very particular dataset,namely data from the Apollo 17 lunar network.The special conditions of the lunar noise environment are investigated,illustrating the interplay between the properties of the noise and the ability to reconstruct Green's functions.With a dispersion analysis of reconstructed Rayleigh waves new information about the shallow shear velocity structure of the Moon are obtained.Passive image interferometry is used to study the effect of temperature changes in the subsurface on the seismic velocities providing direct observation of a dynamic process in the lunar environment.These applications highlight the potential of passive techniques for terrestrial and planetary seismology.     

Homogeneous nucleation of amorphous solid water particles in the upper mesosphere

Condensed water particles are known to exist in the high latitude upper mesosphere during the summer months. However, the mechanism or mechanisms through which they nucleate remains uncertain. It is postulated here that particles of amorphous solid water (ASW, condensed water with a non-crystalline structure) may nucleate homogeneously in the summer mesosphere. Using classical nucleation theory and a one-dimensional model, it is shown that more than 10⁵ cm^?3 amorphous solid water particles can nucleate homogeneously under mesopause conditions. Furthermore, it is shown that homogeneous nucleation competes with heterogeneous nucleation on meteoric smoke particles when the cooling rate is >0.5 K/h. The homogeneous nucleation of amorphous solid water could provide an explanation for the high density of ice particles (many thousands per cm³) thought to be required for electron depletions in the upper mesosphere. A parameterisation for homogeneous nucleation is presented which can be used in other mesospheric cloud models.     

A discontinuous finite element baroclinic marine model on unstructured prismatic meshes

We describe the time discretization of a three-dimensional baroclinic finite element model for the hydrostatic Boussinesq equations based upon a discontinuous Galerkin finite element method. On one hand, the time marching algorithm is based on an efficient mode splitting. To ensure compatibility between the barotropic and baroclinic modes in the splitting algorithm, we introduce Lagrange multipliers in the discrete formulation. On the other hand, the use of implicit–explicit Runge–Kutta methods enables us to treat stiff linear operators implicitly, while the rest of the nonlinear dynamics is treated explicitly. By way of illustration, the time evolution of the flow over a tall isolated seamount on the sphere is simulated. The seamount height is 90% of the mean sea depth. Vortex shedding and Taylor caps are observed. The simulation compares well with results published by other authors.     

Capturing the residence time boundary layer—application to the Scheldt Estuary

At high Peclet number, the residence time exhibits a boundary layer adjacent to incoming open boundaries. In a Eulerian model, not resolving this boundary layer can generate spurious oscillations that can propagate into the area of interest. However, resolving this boundary layer would require an unacceptably high spatial resolution. Therefore, alternative methods are needed in which no grid refinement is required to capture the key aspects of the physics of the residence time boundary layer. An extended finite element method representation and a boundary layer parameterisation are presented and tested herein. It is also explained how to preserve local consistency in reversed time simulations so as to avoid the generation of spurious residence time extrema. Finally, the boundary layer parameterisation is applied to the computation of the residence time in the Scheldt Estuary (Belgium/The Netherlands). This timescale is simulated by means of a depth-integrated, finite element, unstructured mesh model, with a high space–time resolution. It is seen that the residence time temporal variations are mainly affected by the semi-diurnal tides. However, the spring–neap variability also impacts the residence time, particularly in the sandbank and shallow areas. Seasonal variability is also observed, which is induced by the fluctuations over the year of the upstream flows. In general, the residence time is an increasing function of the distance to the mouth of the estuary. However, smaller-scale fluctuations are also present: they are caused by local bathymetric features and their impact on the hydrodynamics.     

Confirming geomorphological interpretations based on portable OSL reader data

Portable optically stimulated luminescence (OSL) readers are increasingly being used in geomorphological and archaeological investigations, but information regarding data reproducibility and the reliability of interpretations based on portable OSL reader data has not yet been presented to the wider geomorphological community. This Letter addresses these two issues by returning to Grabben Gullen Creek in the southeastern Australian Tablelands where we remeasure a sediment profile that was first measured by other researchers 3 years earlier. We also compare portable OSL reader data measured on sediment interpreted to have been deposited in swampy meadow wetlands and flood alluvium settings with data measured on known swampy meadow and flood deposits. Our data show that portable OSL reader data are reproducible. Moreover, we confirm the earlier interpretation that stratigraphies commonly exposed in southeastern Australian Tablelands valley bottoms reflect pre‐European swampy meadow wetlands and flood alluvium. Copyright © 2015 John Wiley & Sons, Ltd.     

Modeling acid-gas generation from boiling chloride brines

Background  

This study investigates the generation of HCl and other acid gases from boiling calcium chloride dominated waters at atmospheric pressure, primarily using numerical modeling. The main focus of this investigation relates to the long-term geologic disposal of nuclear waste at Yucca Mountain, Nevada, where pore waters around waste-emplacement tunnels are expected to undergo boiling and evaporative concentration as a result of the heat released by spent nuclear fuel. Processes that are modeled include boiling of highly concentrated solutions, gas transport, and gas condensation accompanied by the dissociation of acid gases, causing low-pH condensate.     

Differential modulation of eastern oyster (<Emphasis Type="Italic">Crassostrea virginica</Emphasis>) disease parasites by the El-Niño-Southern Oscillation and the North Atlantic Oscillation

The eastern oyster (Crassostrea virginica) is affected by two protozoan parasites, Perkinsus marinus which causes Dermo disease and Haplosporidium nelsoni which causes MSX (Multinucleated Sphere Unknown) disease. Both diseases are largely controlled by water temperature and salinity and thus are potentially sensitive to climate variations resulting from the El Niño-Southern Oscillation (ENSO), which influences climate along the Gulf of Mexico coast, and the North Atlantic Oscillation (NAO), which influences climate along the Atlantic coast of the United States. In this study, a 10-year time series of temperature and salinity and P. marinus infection intensity for a site in Louisiana on the Gulf of Mexico coast and a 52-year time series of air temperature and freshwater inflow and oyster mortality from Delaware Bay on the Atlantic coast of the United States were analyzed to determine patterns in disease and disease-induced mortality in C. virginica populations that resulted from ENSO and NAO climate variations. Wavelet analysis was used to decompose the environmental, disease infection intensity and oyster mortality time series into a time–frequency space to determine the dominant modes of variability and the time variability of the modes. For the Louisiana site, salinity and Dermo disease infection intensity are correlated at a periodicity of 4 years, which corresponds to ENSO. The influence of ENSO on Dermo disease along the Gulf of Mexico is through its effect on salinity, with high salinity, which occurs during the La Niña phase of ENSO at this location, favoring parasite proliferation. For the Delaware Bay site, the primary correlation was between temperature and oyster mortality, with a periodicity of 8 years, which corresponds to the NAO. Warmer temperatures, which occur during the positive phase of the NAO, favor the parasites causing increased oyster mortality. Thus, disease prevalence and intensity in C. virginica populations along the Gulf of Mexico coast is primarily regulated by salinity, whereas temperature regulates the disease process along the United States east coast. These results show that the response of an organism to climate variability in a region is not indicative of the response that will occur over the entire range of a particular species. This has important implications for management of marine resources, especially those that are commercially harvested.