A new methodology for energy-based seismic design of steel moment frames

A procedure is proposed whereby input and hysteretic energy spectra developed for single-degree-of-freedom (SDOF) systems are applied to multi-degree-of-freedom (MDOF) steel moment resisting frames. The proposed procedure is verified using four frames, viz., frame with three-, five-, seven- and nine-stories, each of which is subjected to the fault-normal and fault-parallel components of three actual earthquakes. A very good estimate for the three- and five-story frames, and a reasonably acceptable estimate for the seven-, and nine-story frames, have been obtained. A method for distributing the hysteretic energy over the frame height is also proposed. This distribution scheme allows for the determination of the energy demand component of a proposed energy-based seismic design (EBSD) procedure for each story. To address the capacity component of EBSD, a story-wise optimization design procedure is developed by utilizing the energy dissipating capacity from plastic hinge formation/rotation for these moment frames. The proposed EBSD procedure is demonstrated in the design of a three-story one-bay steel moment frame.     

Examining the Use of USEPA's Generic Attenuation Factor in Determining Groundwater Screening Levels for Vapor Intrusion

A value of 0.001 is recommended by the United States Environmental Protection Agency (USEPA) for its groundwater‐to‐indoor air Generic Attenuation Factor (GAFG), used in assessing potential vapor intrusion (VI) impacts to indoor air, given measured groundwater concentrations of volatile chemicals of concern (e.g., chlorinated solvents). The GAFG can, in turn, be used for developing groundwater screening levels for VI given target indoor air quality screening levels. In this study, we examine the validity and applicability of the GAFG both for predicting indoor air impacts and for determining groundwater screening levels. This is done using both analysis of published data and screening model calculations. Among the 774 total paired groundwater‐indoor air measurements in the USEPA's VI database (which were used by that agency to generate the GAFG) we found that there are 427 pairs for which a single groundwater measurement or interpolated value was applied to multiple buildings. In one case, up to 73 buildings were associated with a single interpolated groundwater value and in another case up to 15 buildings were associated with a single groundwater measurement (i.e., that the indoor air contaminant concentrations in all of the associated buildings were influenced by the concentration determined at a single point). In more than 70% of the cases (390 of 536 paired measurements in which horizontal building‐monitoring well distance was recorded) the monitoring wells were located more than 30 m (and one up to over 200 m) from the associated buildings. In a few cases, the measurements in the database even improbably implied that soil gas contaminant concentrations increased, rather than decreased, in an upward direction from a contaminant source to a foundation slab. Such observations indicate problematic source characterization within the data set used to generate the GAFG, and some indicate the possibility of a significant influence of a preferential contaminant pathway. While the inherent value of the USEPA database itself is not being questioned here, the above facts raise the very real possibility that the recommended groundwater attenuation factors are being influenced by variables or conditions that have not thus far been fully accounted for. In addition, the predicted groundwater attenuation factors often fall far beyond the upper limits of predictions from mathematical models of VI, ranging from screening models to detailed computational fluid dynamic models. All these models are based on the same fundamental conceptual site model, involving a vadose zone vapor transport pathway starting at an underlying uniform groundwater source and leading to the foundation of a building of concern. According to the analysis presented here, we believe that for scenarios for which such a “traditional” VI pathway is appropriate, 10^?4 is a more appropriately conservative generic groundwater to indoor air attenuation factor than is the EPA‐recommended 10^?3. This is based both on the statistical analysis of USEPA's VI database, as well as the traditional mathematical models of VI. This result has been validated by comparison with results from some well‐documented field studies.     

Intentional contamination of water distribution networks: developing indicators for sensitivity and vulnerability assessments

Performing a comprehensive risk analysis is primordial to ensure a reliable and sustainable water supply. Though the general framework of risk analysis is well established, specific adaptation seems needed for systems such as water distribution networks (WDN). Understanding of vulnerabilities of WDN against deliberate contamination and consumers’ sensitivity against contaminated water use is very vital to inform decision-maker. This paper presents an innovative step-by-step methodology for developing comprehensive indicators to perform sensitivity, vulnerability and criticality analyses in case of absence of early warning system (EWS). The assessment and the aggregation of these indicators with specific fuzzy operators allow identifying the most critical points in a WDN. Intentional intrusion of contaminants at these points can potentially harm both the consumers as well as water infrastructure. The implementation of the developed methodology has been demonstrated through a case study of a French WDN unequipped with sensors.     

Isolation of 12 microsatellite markers following a pyrosequencing procedure and cross-priming in two invasive cryptic species, Alexandrium catenella (group IV) and A. tamarense (group III) (Dinophyceae)

Alexandrium catenella (group IV) and Alexandrium tamarense (group III) (Dinophyceae) are two cryptic invasive phytoplankton species belonging to the A. tamarense species complex. Their worldwide spread is favored by the human activities, transportation and climate change. In order to describe their diversity in the Mediterranean Sea and understand their settlements and maintenances in this area, new microsatellite markers were developed based on Thau lagoon (France) samples of A. catenella and A. tamarense strains. In this study twelve new microsatellite markers are proposed. Five of these microsatellite markers show amplifications on A. tamarense and ten on A. catenella. Three of these 12 microsatellite markers allowed amplifications on both cryptic species. Finally, the haplotypic diversity ranged from 0.000 to 0.791 and 0.000 to 0.942 for A. catenella and A. tamarense respectively.     

Formation of mud clast breccias and the process of sedimentary autobrecciation in the hominin-bearing (Homo naledi) Rising Star Cave system,South Africa

Unconsolidated mud clast breccia facies in the hominin-bearing (Homo naledi) Rising Star Cave, Cradle of Humankind, South Africa, are interpreted to have formed through a process termed sedimentary autobrecciation in this study. This process, by which most of the angular mud clast breccia deposits are thought to have formed autochthonously to para-autochthonously via a combination of erosion, desiccation, diagenesis and microbial alteration of laminated mud deposits, is thought to have taken place under relatively dry (i.e. non-flooded) conditions inside the cave. Subsequently, gravitational slumping and collapse was the dominant mechanism that produced the mud clast breccia deposits, which commonly accumulate into debris aprons. The mud clast breccia is typically associated with (micro) mammal fossils and is a common facies throughout the cave system, occurring in lithified and unlithified form. This facies has not been described from other cave localities in the Cradle of Humankind. Additionally, sedimentary autobrecciation took place during the deposition of some of the fossils within the Rising Star Cave, including the abundant Homo naledi skeletal remains found in the Dinaledi Subsystem. Reworking of the mud clast breccia deposits occurs in some chambers as they slump towards floor drains, resulting in the repositioning of fossils embedded in the breccias as evidenced by cross-cutting manganese staining lines on some Homo naledi fossil remains. The formation of the unlithified mud clast breccia deposits is a slow process, with first order formation rates estimated to be ca 8 × 10⁻⁴ mm year⁻¹. The slow formation of the unlithified mud clast breccia facies sediments and lack of laminated mud facies within these deposits, indicates that conditions in the Dinaledi Chamber were probably stable and dry for at least the last ca 300 ka, meaning that this study excludes Homo naledi being actively transported by fluvial mechanisms during the time their remains entered the cave.     

Determination of Radiogenic 87Sr/86Sr and Stable δ88/86SrSRM987 Isotope Values of Thirteen Mineral,Vegetal and Animal Reference Materials by DS‐TIMS

This work presents new ⁸⁷Sr/⁸⁶Sr and δ^88/86Sr_SRM987 isotopic values of thirteen mineral, vegetal and animal reference materials. Except for UB‐N, all our results are consistent with previously published data. Our results highlight intermediate precisions among the best presently published and a non‐significant systematic shift with the calculated δ^88/86Sr_SRM987 mean values for the three most analysed reference materials in the literature (i.e., IAPSO, BCR‐2 and JCp‐1). By comparison with the literature and between two distinct digestions, a significant bias of δ^88/86Sr_SRM987 values was highlighted for two reference materials (UB‐N and GS‐N). It has also been shown that digestion protocols (nitric and multi‐acid) have a moderate impact on the δ^88/86Sr_SRM987 isotopic values for the Jls‐1 reference materials suggesting that a nitric acid digestion of carbonate can be used without significant bias from partial digestion of non‐carbonate impurities. Different δ^88/86Sr_SRM987 values were measured after two independent Sr/matrix separations, according to the same protocol, for a fat‐rich organic reference material (BCR‐380R) and have been related to a potential post‐digestion heterogeneity. Finally, the δ^88/86Sr_SRM987 value differences measured between animal‐vegetal and between coral‐seawater reference materials agree with the previously published results, highlighting an Sr isotopic fractionation along the trophic chain and during carbonate precipitation.     

A New Appraisal of Sri Lankan BB Zircon as a Reference Material for LA‐ICP‐MS U‐Pb Geochronology and Lu‐Hf Isotope Tracing

A potential zircon reference material (BB zircon) for laser ablation‐inductively coupled plasma‐mass spectrometry (LA‐ICP‐MS) U‐Pb geochronology and Hf isotope geochemistry is described. A batch of twenty zircon megacrysts (0.5–1.5 cm³) from Sri Lanka was studied. Within‐grain rare earth element (REE) compositions are largely homogeneous, albeit with some variation seen between fractured and homogeneous domains. Excluding fractured cathodoluminescence bright domains, the variation in U content for all analysed crystals ranged from 227 to 368 μg g^?1 and the average Th/U ratios were between 0.20 and 0.47. The Hf isotope composition (0.56–0.84 g/100 g Hf) is homogeneous within and between the grains – mean ¹⁷⁶Hf/¹⁷⁷Hf of 0.281674 ± 0.000018 (2s). The calculated alpha dose of 0.59 × 10¹⁸ g^?1 for a number of BB grains falls within the trend of previously studied, untreated zircon samples from Sri Lanka. Aliquots of the same crystal (analysed by ID‐TIMS in four different laboratories) gave consistent U‐Pb ages with excellent measurement reproducibility (0.1–0.4% RSD). Interlaboratory assessment (by LA‐ICP‐MS) from individual crystals returned results that are within uncertainty equivalent to the TIMS ages. Finally, we report on within‐ and between‐grain homogeneity of the oxygen isotope systematic of four BB crystals (13.16‰ VSMOW).     

Coseismic Fault Slip of the September 16, 2015 <Emphasis Type="Italic">Mw</Emphasis> 8.3 Illapel,Chile Earthquake Estimated from InSAR Data

The complete surface deformation of 2015 Mw 8.3 Illapel, Chile earthquake is obtained using SAR interferograms obtained for descending and ascending Sentinel-1 orbits. We find that the Illapel event is predominantly thrust, as expected for an earthquake on the interface between the Nazca and South America plates, with a slight right-lateral strike slip component. The maximum thrust-slip and right-lateral strike slip reach 8.3 and 1.5 m, respectively, both located at a depth of 8 km, northwest to the epicenter. The total estimated seismic moment is 3.28 × 10²¹ N.m, corresponding to a moment magnitude Mw 8.27. In our model, the rupture breaks all the way up to the sea-floor at the trench, which is consistent with the destructive tsunami following the earthquake. We also find the slip distribution correlates closely with previous estimates of interseismic locking distribution. We argue that positive coulomb stress changes caused by the Illapel earthquake may favor earthquakes on the extensional faults in this area. Finally, based on our inferred coseismic slip model and coulomb stress calculation, we envision that the subduction interface that last slipped in the 1922 Mw 8.4 Vallenar earthquake might be near the upper end of its seismic quiescence, and the earthquake potential in this region is urgent.     

Chemical evolution of the Mt. Hekla,Iceland, groundwaters: A natural analogue for CO2 sequestration in basaltic rocks

A detailed study of the chemical composition of the groundwater surrounding the Mt. Hekla volcano in south Iceland was performed to assess fluid evolution and toxic metal mobility during CO₂-rich fluid basalt interaction. These fluids provide a natural analogue for evaluating the consequences of CO₂ sequestration in basalt. The concentration of dissolved inorganic C in these groundwaters decreases from 3.88 to 0.746 mmol/kg with increasing basalt dissolution while the pH increases from 6.9 to 9.2. This observation provides direct evidence of the potential for basalt dissolution to sequester CO₂. Reaction path calculations suggest that dolomite and calcite precipitation is largely responsible for this drop in groundwater dissolved C concentration. The concentrations of toxic metal(loid)s in the waters are low, for example the maximum measured concentrations of Cd, As and Pb were 0.09, 22.8 and 0.06 nmol/kg, respectively. Reaction path modelling indicates that although many toxic metals may be initially liberated by the dissolution of basalt by acidic CO₂-rich solutions, these metals are reincorporated into solid phases as the groundwaters are neutralized by continued basalt dissolution. The identity of the secondary toxic metal bearing phases depends on the metal. For example, calculations suggest that Sr and Ba are incorporated into carbonates, while Pb, Zn and Cd are incorporated into Fe (oxy)hydroxide phases.