Efficacy of laser cleaning in the removal of biological patina on the volcanic scoria of the rock-hewn churches of Lalibela,Ethiopia

The Lalibela rock-hewn churches are one of the most important religious pilgrimage sites in Ethiopia. These churches are carved from the scoriaceous basalt rock substrate, which has been exposed to attack by biological agents with significant loss of surface material. Particularly, the widespread growth of lichens and other microorganisms on the carved surfaces of the churches has proven to represent a substantial threat for the preservation of the site. In this study, laboratory tests have been conducted to assess the feasibility of using laser technology as an efficient cleaning method of biological patina from polymineralic stone substrates. Multi-analytical techniques were applied for the characterization of the stone samples collected from two of the Lalibela churches: Bete Giyorgis and Bete Amanuel. Stone samples artificially inoculated with bacteria, yeast, fungi isolates, and lichen-encrusted samples were laser cleaned using UV and IR laser wavelengths. The high content of Fe and Ti oxides and the high porosity have made the stone surfaces easily susceptible to low-energy laser treatment. Results indicate that laser cleaning can be applied to polymineralic lithotypes and UV irradiation can successfully remove lichen colonies. Further studies need to be conducted to optimize the laser procedure in polymineralic, high porosity stones.     

Synthesis and characterisation of a multifunctional oil-based drilling fluid additive

An oil-based drilling fluid additive H-DEA (or humic acid-cocamide diethanolamine) was synthesised using humic acid and cocamide diethanolamine as raw materials. The rheological behaviors of H-DEA showed that the synthesised product has the good properties in both decreasing the filtrate loss and improving rheology property of oil-based drilling fluids compared with other commercially available additives. Under the optimal additive amount of 3%, both API filtrate loss and yield point changed remarkably from 5.40 to 0.41 mL and 9.0 to 25.6 Pa, respectively. Furthermore, differential scanning calorimetry (DSC) showed that H-DEA has good thermal stability in a wide temperature range up to 170 °C. Infrared spectroscopy (IR) and rheological analysis revealed that the possible mechanism of the multifunctional effects may be attributed to the existing of high density of strong polar groups, hydrogen bonds, electrostatic forces, and intermolecular association on H-DEA molecular structure. The results of the study showed that the synthesised H-DEA can be potentially used as a multifunctional oil-based drilling fluid additive in oil-drilling excavation.     

The influence of volcanism on paleoclimate in the northeast of China： Insights from Jinchuan peat, Jilin Province, China

Just like contemporary sediments, peat itself is a good repository of information about climate change, the effects of volcanic activity on climate change have been truly recorded in peat, since it is a major archive of volcanic eruption incidents. A section of sand was identified as tephra from the Jinchuan peat, Jilin Province, China, for the grains look like slag with surface bubbles and pits, characterized by high porosity, and loose structure with irregular edges and corners. According to the peat characteristics of uniform deposition, the tephra was dated at 2002–1976 a B.P. by way of linear interpolation, so the time of volcanic eruption was 15 B.C.–26 A.D. (the calibrated age). While the geochemical characteristics of tephra in this study are quite the same as those of tephra from the Jinlongdingzi volcano at Longgang and from alkaline basaltic magma, with the contents of SiO₂<55%, and the similar contents to Al₂O₃ and Fe, but the contents of Na₂O>K₂O. We speculated that the tephra in this study came from the Longgang volcano group. Compared with 11 recorded volcanic eruption events as shown on the carbon and oxygen isotope curves of the Jinchuan peat cellulose, it is obviously seen that adjacent or large-scale volcanic eruptions are precisely corresponding to the minimum temperature and humidity. It seems that these volcanic eruptions indeed affected the local climate, leading to the drop of regional temperature and humidity. As a result, there was prevailing a cold and dry climate there, and all these changes can be well recorded in peat. So the comparison of volcanic eruption events with information about climate change developed from peat, can provide strong evidence for the impact of volcanism on climate change.     

Reconsideration of the structural relationship between the Parnassus–Ghiona and Vardoussia geotectonic zones in central Greece

The relationship between the geotectonic zones of the Hellenides orogen is important for understanding its geological evolution. The Parnassus–Ghiona geotectonic zone in central Greece has long been interpreted as thrust over the Vardoussia subzone. On the basis of detailed geological mapping, supported by a stratigraphic study and tectonic observations, no evidence of an overthrust of the Ghiona limestones on the Vardoussia flysch was found. The new data show that the transition of the Ghiona limestones to the Vardoussia flysch is a sedimentary passage and at certain places the base of the flysch is marked by a basal conglomerate formation. The entire deformation of the Ghiona is related to a large-scale anticline of the limestone series, presenting a highly inclined western limb, overlain by the flysch strata, which were deposited in a common basin between Ghiona and Vardoussia mountains. Consequently, questions concerning the geotectonic position of the Vardoussia subzone and the role of the Parnassus–Ghiona zone to the orogenic evolution of the eastern External Hellenides are raised.     

Sr-isotope stratigraphy of the Upper Jurassic of central Portugal (Lusitanian Basin) based on oyster shells

Strontium isotope stratigraphy was performed on oyster shells from the Late Jurassic of the Lusitanian Basin (central Portugal). This represents the first approach to obtain numerical ages for these strata. The new chronostratigraphic data provide a more precise age determination of several units. After a basin-wide hiatus sedimentation in the Late Jurassic is proven in the Cabo Mondego and Cabaços formations to resume as early as the Middle Oxfordian. The Alcobaça formation can be placed in the latest Late Oxfordian to Late Kimmeridgian, while data from the upper part of the Abadia Formation indicate an Early to Late Kimmeridgian age. The Farta Pao formation ranges from the latest Kimmeridgian to the latest Tithonian. The largely synchronous Sobral, Arranhó I, and Arranhó II members are overlain by the late Early to Late Tithonian Freixial Member. The brief, local carbonate incursion of the Arranhó I member marks the Kimmeridgian–Tithonian boundary. Oysters are shown once more to be suitable for strontium isotope studies. Their calcitic shells are often unaffected by diagenesis. In particular for marginal marine Jurassic and Cretaceous strata, where belemnites are usually absent, oysters may serve as a valuable tool for isotope stratigraphy.     

Volume estimation and stage division of the Mahu landslide in Sichuan Province,China

The Mahu lake, the third deepest lake in China, is located on the west bank of the Jinsha River in Leibo county, Sichuan Province. It is a dammed lake created by an old landslide on the ancient Huanglang river, a tributary on the west bank of the Jinsha River. Previous studies (Wang and Lu in J Mt Res S1:44–47, 2000) suggested that this landslide was caused by an earthquake approximately 372 ka (Middle Pleistocene), during which a few hundreds of million cubic meters of debris were deposited between 1177 and 900 m a.s.l. (above sea level), covering an area of around 15 km². Our further investigations, including geodetic survey, borehole drilling, and field reconnaissance, combining with five chronological data, have made some new discoveries at this site. First, the toe of the landslide extends from 900 m a.s.l. down to 320 m a.s.l., i.e., the local bed elevation of the contemporary Jinsha River. Second, the area of the landslide deposits is 17.3 km² with a volume of 2.38 km³, much larger than the previous estimation. Thus, it should be one of the largest known landslides in China. And the lower elevation of the landslide’s toe also rules out the possibility that it is a hanging valley on the ancient Huanglang river. Our work suggests that this landslide was created by five events according to the overlapping characteristics of the deposits and five chronological data, which are old than 52,600 years, old than 16,000 years, old than 15,500 years, 5800 years, and old than 4200 years, respectively.     

Deformation mechanism of strain localization in 2D numerical interface tests

Heterogeneity arises in soil subjected to interface shearing, with the strain gradually localizing into a band area. How the strain localization accumulates and develops to form the structure is crucial in explaining some significant constitutive behaviors of the soil–structural interface during shearing, for example, stress hardening, softening, and shear-dilatancy. Using DEM simulation, interface shear tests with a periodic boundary condition are performed to investigate the strain localization process in densely and loosely packed granular soils. Based on the velocity field given by grains’ translational and rotational velocities, several kinematic quantities are analyzed during the loading history to demonstrate the evolution of strain localization. Results suggest that tiny concentrations in the shear deformation have already been observed in the very early stage of the shear test. The degree of the strain localization, quantified by a proposed new indicator, α, steadily ascends during the stress-hardening regime, dramatically jumps prior to the stress peak, and stabilizes at the stress steady state. Loose specimen does not develop a steady pattern at the large strain, as the deformation pattern transforms between localized and diffused failure modes. During the stress steady state of both specimens, remarkable correlations are observed between α and the shear stress, as well as between α and the volumetric strain rate.     

Role of Crystal Interlocking on the Strength of Brittle Rocks

Results of an experimental programme on heterogeneous rock-like specimens of dental plaster confirm the pronounced role of tensile microcracks on brittle failure. Microbuckling of very small rock-columns formed amid closely located tensile cracks was observed as the key incident connecting stable phenomenon of tensile cracking to unstable phenomenon of shearing and subsequent macroscopic failure. Using the classical beam and buckling theories and considering geometry of the problem a new failure criterion is proposed. As a novel attempt, this new failure criterion relates the compressive strength of rock to three basic microstructural properties, i.e. degree of crystal interlocking, average Young modulus and average tensile strength of rock forming minerals.     

The influence of recultivation technique and seed mixture on erosion stability after restoration in mountain environment

Control of erosion, and all of its after effects, from increased surface drainage and erosion to the formation of karst, is one of the essential problems when undertaking recultivation following necessary interventions in the sub-alpine and alpine vegetation stage (high zones). Average slope inclinations of 30–45% in the vicinity of ski runs, and far above in areas of natural erosion and avalanche zones, make restoration processes with sufficient erosion protection the prerequisite for success. Only a sufficient vegetation development of more than 70% ground cover stabilises the topsoil in the long term and reduces soil erosion to an acceptable degree. From 1999 to 2002, an international EU project with the participation of research groups and private firms from Austria, Italy and Germany was carried out under the direction of the Agricultural Research and Education Centre Raumberg-Gumpenstein (AREC) on five different Alpine sites at altitudes from 1,245 to 2,350 m above sea level. The aim of the work was the formulation of practice-relevant requirements for recultivation following intervention in high zones, especially following constructional measures in the vicinity of ski runs and lifts, torrent- and avalanche barriers. In a statistical comparison, the relationship between restoration techniques, seed mixtures of differing ecological value and vegetation cover was observed. The influence of application technique on erosion processes after restoration was obvious for the first two vegetation periods. Only with the additional use of mulch covers could increase surface drainage and noticeable soil loss be avoided. At high altitudes, the choice of seed mixture, irrespective of whether rapid or slow growing and independent of the extent of accompanying fertilisation, had no significance in the first two vegetation periods following sowing. In the following growing seasons, however, higher cover values were obtained with site-specific seed mixtures at three of the five experimental sites. While few species of the commercial seed mixture showed satisfactory persistency, most of the grasses and in particular the alpine leguminosae of site-specific seed mixtures increased their share during the observation period. In the long-term, sufficient protection against erosion is only guaranteed by the use of stable, enduring and ecologically adapted species.