Spatial variations of precursory seismic quiescence observed in recent years in the eastern part of Turkey

A statistical analysis is made for the eastern part of Turkey in the beginning of 2009 by studying the phenomenon of seismic quiescence as a potential precursor of the main shocks. The results produced four areas having seismic quiescence in the beginning of 2009. These areas are observed to be centered at 39.96°N–40.69°E (around A?kale, Erzurum), 39.36°N–39.74°E (around Ovac?k, Tunceli), 39.02°N–40.52°E (including Elaz?? and Bingöl), and 38.45°N–42.94°E (Van Lake). Based on the recent results showing 5 ± 1.5 years quiescence before the occurrence of an earthquake in this region, the future earthquake would be expected between 2009.5 and 2010.5. The future earthquake occurrence may reach 2012 if we consider the standard deviation of average seismic quiescence as ±1.5 years. We have found that the M _W = 6.0 Elaz?? earthquake on 8 March 2010, followed a seismic quiescence starting about 5 years before the main shock. Thus, special interest should be given to the other regions where the seismic quiescence is observed.     

On the response of a turbulent coastal buoyant current to wind events: the case of the Western Adriatic Current

This numerical study focuses on the response of the Western Adriatic Current to wind forcing. The turbulent buoyant surface current is induced by the Po river outflow in the Adriatic Sea. Idealized and realistic wind conditions are considered by retaining the complex geomorphology of the middle Adriatic basin. In the absence of wind, the Adriatic Promontories force the current to separate from the coast and induce instabilities. Persistent 7-m s^− 1 downwelling favorable northwesterly winds thicken and narrow the current. Instabilities whose size is ~10 km develop but ultimately vanish, since there is not enough across-shore space to grow. On the contrary, 7-m s^− 1 upwelling favorable southeasterly winds thin and widen the current, and instabilities can grow to form mesoscale (~35 km) features. When realistic winds are considered, the same trends are observed, but the state of the sea set up by previous wind events also plays a crucial role. The turbulent regimes set up by different winds affect mixing and the WAC meridional transport. With downwelling winds, the transport is generally southward and mixing happens mostly between the fresher (S ≤ 38) salinity classes. With upwelling winds, the transport decreases and changes sign, and mixing mainly involves saltier (S > 38) waters. In all cases, mixing is enhanced when a finer 0.5-km horizontal resolution is employed.     

Wireless technologies for the monitoring of strategic civil infrastructures: an ambient vibration test on the Fatih Sultan Mehmet Suspension Bridge in Istanbul, Turkey

Rapid improvements in telemetry technology and the general decrease in communication costs have raised a growing interest in low-cost wireless sensing units. This is especially the case for structural monitoring purposes, where they are becoming a more valuable alternative to conventional wired monitoring system. The main advantages associated with the use of wireless sensing unit include a considerable decrease in installation costs, decentralization of data analysis, and the possibility of broadening the functional capabilities by exploiting the use, at the same time and place, of different sensors. In this work, the design of a low-cost wireless sensing unit able both to collect, analyze, store, and communicate data and estimated parameters is presented. The suitability of a network of these low-cost wireless instruments for monitoring the vibration characteristics and dynamic properties of strategic civil infrastructures is validated during a ambient vibration recording field test on the Fatih Sultan Mehmet Bridge in Istanbul, Turkey.     

Pretreatment of Olive Oil Mill Wastewater by Two Different Applications of Fenton Oxidation Processes

The removal of chemical oxygen demand (COD) and phenol from olive oil mill wastewaters (OOMW) was investigated experimentally by using conventional Fenton (CFP) and Fenton type processes (FTP) with zero valent iron (ZVI). Different operational parameters such as initial pH, Fe²⁺, Fe⁰, and H₂O₂ concentrations were examined. Kinetic studies in terms of COD and phenol removals for both CFP and FTP were performed. The original pH value (4.6) of OOMW for CFP was found as the optimum pH. The determined optimum conditions are [Fe²⁺] = 1500 mg L^?1, [H₂O₂] = 1750 mg L^?1, and pH = 4.6 for CFP; [Fe⁰] = 2000 mg L^?1, [H₂O₂] = 2000 mg L^?1, and pH = 3 for FTP. 82.4% COD and 62% phenol removals were performed under the optimum conditions by CFP, while 82% COD and 63.4% phenol were removed by FTP. According to the results of kinetic studies, it was observed that COD and phenol were removed by FTP more rapidly, compared to CFP. Consequently, it was determined that both CFP and FTP were effective processes for the pretreatment of OOMW.     

Södra Finlands blocksänkor

Söderman, G.: Södra Finlands blocksänkor. Geografisk Tidsskrift, 82, 77–81, November 1. 1982.

Map analysis and field inventory show that there are about 20000 boulder depressions in Finland south of 64°N. The features are most common in blocky till areas close to fracture zones in the bedrock. The depressions range in altitude from above the highest shore-line down to 25–30 m above present sea-level. They are youngest in the NW part. Some depressions show surface patterns.

SAMMANDRAG

Blocksänkor är frostmarksformer med en huvudsakligen vertikal sortering som ett resultat av differentiell uppfrysning av blockrikt utgångsmaterial. De framställer inga klimatiska kriteria om utbildningstid och -förhållanden. Däremot här de till områden med sasängbetonad frostaktivitet, och om ej inskränkta till nedisade omräden, trots typiska fär dessa. Blocksänkorna är den mest utbredda och största frostmarksform inom den fennoskandiska skogsregionen i dag.     

Observations on the building damages after 19 May 2011 Simav (Turkey) earthquake

An earthquake with a magnitude of 5.7 $(\text{ M}_{\mathrm{L}})$ has struck Simav, Kutahya located in the western part of Turkey on May 19, 2011. The ground motion caused observable damage within 25 km radius from the epicenter. Although the earthquake is moderate, its effects on the structures are serious. This paper presents the observations on seismic damages of reinforced concrete (RC) and masonry structures. Common reasons of damage in RC buildings are: low quality of concrete, detailing mistakes of reinforcement, short column, pounding, overhangs and misconstructed gable and outer infill wall parts. Interesting cases related to these deficiencies are reported. Damages in the masonry buildings are due to lack of connection between orthogonal walls and unsuitable location and dimension of openings. The damages at structures are more noticeable at regions with unfavorable soil conditions like plain regions or foothills. However, on stiffer soils at hilly sides, the damages seem to be more limited and masonry structures are observed to be less affected compared to the RC ones. The damages in RC buildings found to be increasing with story number for light damage states. However, for heavier damage states, 4–5 story buildings are observed to be the most damaged.     

Comparison of 2D versus 3D modeling approaches for the analysis of the concrete faced rock‐fill Cokal Dam

This paper's primary purpose is to compare the 2D and 3D analysis methodologies in investigating the performance of a concrete faced rock‐fill dams under dynamic loading conditions. The state of stress on the face plate was obtained in both cases using a total strain based crack model to predict the spreading of cracks on the plate and the corresponding crack widths. Results of the 2D and 3D analyses agree well. Although significantly more demanding, 3D analyses have the advantage of predicting the following: (i) the opening of the vertical construction joints; (ii) the cracking at the valley sides; and (iii) the crushing of the plate during the seismic action. During the earthquake loading, the cracking predicted at the base of the face plate after the impounding spread significantly towards the crest of the dam; however, the crack widths are obtained relatively small. Crushing of the face plates at the construction joints is the primary cause of the large scale cracking predicted on the face plate for high intensity earthquakes. Earthquake induced permanent deformation of the fill increases the compressive stresses on the face plate, thereby reducing the minute cracking on the plate. However, this effect also leads to significant increases in the residual openings at the construction joints and at the plinth level. Copyright © 2013 John Wiley & Sons, Ltd.