新疆伊吾县沙棘气候品质认证技术研究

沙棘是新疆伊吾县的特色产业，沙棘的优质高产与气象因素密切相关。气候品质认证是一个新兴产品，通过开展沙棘气候品质认证工作，将有利于保护特色种质资源、提升企业的品牌价值和市场竞争力。利用伊吾县1991—2020年国家基本气象站和2010-2021年池镇区域自动站的气象观测数据和沙棘发育期资料，根据沙棘的生长习性、种植区气候适宜性和管理状况对品质影响的分析，构建沙棘气候品质认证模型，对伊吾县种植的特色气候品质的沙棘进行了认证和评价。结果表明，2021年伊吾县沙棘气候品质等级为特优。     

The influence of metal content on the physical and mineralogical properties of pelagic manganese nodules

Deep sea manganese nodules are considered as important natural resources for the future because of their Ni, Cu and Co contents. Their different shapes cannot be correlated clearly with their chemical composition. Surface constitution, however, can be associated with the metal contents. A classification of the nodules is suggested on the basis of these results. The iron content of the nodules strikingly shows relations to the physical properties (e.g. density and porosity). The method of density-measurement is the reason for this covariance. The investigation of freeze-dried nodular substance does not give this result. The Fe-rich nodules lose more hydration water than the Fe-poor ones during heat drying. The reason for this effect is the different crystallinity, respectively the particle size. The mean particle size is calculated on the basis of geometrical models. The X-ray-diffraction analysis proves the variation of crystallinity in connection with the Fe-content, too. The internal nodular textures also show characteristic distinctions.     

Carbon-14 calibration between the University of Washington and the University of Miami Geosecs laboratories

Cross-checks between the Washington and Miami Geosecs radiocarbon laboratories verify that results on identical samples measured at the two laboratories agree with the stated accuracy of each laboratory which is±4‰inΔ¹⁴C.     

Determination of hydraulic conductivity of sand-bentonite mixtures for engineering purposes

Pollution of the environment due to leakage from waste repositories is a well-known and wide spread problem. Emphasis has therefore been put on design of liners for such repositories, focusing on hydraulic conductivity and its variation with time, liner composition, water content, compaction etc. The paper addresses the hydraulic conductivity of sand/bentonite mixtures, especially the variation of the hydraulic conductivity as a function of bentonite content, compaction and degree of saturation. In order to better understand the variation of the hydraulic conductivity of a sand–bentonite mixture a new parameter k ₁ has been proposed. The parameter reflects the amount of bentonite per pore volume and can easily be calculated based on the amount of bentonite and the dry density of the soil mixture. Thereby, the hydraulic conductivity can be predicted as a function of different degres of compaction. This method can be used for engineering purposes to predict the hydraulic conductivity at an early stage of a design to get an idea of the required design and hence, cost.     

Trace-element content of “Karst Bauxites” and their parent rocks in the mediterranean belt

This work deals with a concise but comprehensive study of trace-element distribution in the bauxite deposits of Mediterranean belt. Although the alloctonous and mainly detritic characters of several “karst bauxite” deposits are well established, their parent rock has remained largely enigmatic. Evidence is available that some chemical elements, notably Zr, Cr and Ga are largely immobile during the weathering and diagenesis and study of such trace-elements in “karst bauxites” permits to make an approach to the lithological nature of their parent rocks. It is shown, by reference to analyses of bauxites from Mediterranean areas, that all the deposits studied are aligned from a Cr rich pole related to ultramafics to another pole rich in Ga and Zr contents and in genetical relation with acidic parent rocks. The results obtained by this way have been controlled by application of “trace-element accumulation coefficient” which permits to distinguish four principal zones of bauxite derived from the parent rock of different lithological characters (Fig. 3).     

Landslide risk assessment and management by decision analytical procedure for Dereköy, Konya, Turkey

The Dereköy landslide threatening the town of Dereköy, Konya, Turkey is investigated in order to assess and manage the associated risk. Dereköy town, located 12 km west of Konya city center, which is the second largest city in central Anatolia, has been extending due to the demand for new settlement places in Konya for the last decade. As most of the town is situated on the slopes of Meram river valley, on which the slope movements are observed, the risk of landslide has been increasing due to these new settlements. In this study, the landslide risk in Dereköy is assessed by following the so-called decision analytical procedure. The risk is defined by multiplication of hazard and consequences of the hazard. The hazard, which is the probability of slope failure, is computed by using the first-order second-moment (FOSM) method. The possible consequences of a landslide in Dereköy are analyzed and their costs are assessed relative to each other. A decision tree for choosing among the possible alternatives for reducing the risk is constructed in order to manage the risk.     

Application of electrical resistivity tomography technique for investigation of landslides: a case from Turkey

Electrical resistivity imaging is a widely used tool in near surface geophysical surveys for investigation of various geological, environmental and engineering problems including landslide. In this study, an electrical resistivity tomography (ERT) survey was conducted in a landslide area, located in the Söke district of Aydın, Turkey. In 2003, the Neogene-aged units on the slope next to a newly built school building became unstable due to an excavation work and moved after a heavy rainfall. The resulting landslide partly covered the school. The authors carried out a 2-D resistivity survey along three profiles over the landslide mass using a Wenner configuration. It yielded useful information about the geometry and characteristics of the landslide. In addition, a 2-D synthetic resistivity modelling study was carried out to understand the response of the resistivity method to a landslide problem before the field surveys. Eight boreholes were also drilled in the landslide area. Both the drilling and resistivity results indicated the presence of a fault in the site. Also, the resistivity data from the line measured along the axis of the landslide revealed the surface of rupture.     

Time-domain representation of frequency-dependent foundation impedance functions

Foundation impedance functions provide a simple means to account for soil–structure interaction (SSI) when studying seismic response of structures. Impedance functions represent the dynamic stiffness of the soil media surrounding the foundation. The fact that impedance functions are frequency dependent makes it difficult to incorporate SSI in standard time-history analysis software. This paper introduces a simple method to convert frequency-dependent impedance functions into time-domain filters. The method is based on the least-squares approximation of impedance functions by ratios of two complex polynomials. Such ratios are equivalent, in the time-domain, to discrete-time recursive filters, which are simple finite-difference equations giving the relationship between foundation forces and displacements. These filters can easily be incorporated into standard time-history analysis programs. Three examples are presented to show the applications of the method.     

Regional Geothermal Characterisation of East Anatolia from Aeromagnetic,Heat Flow and Gravity Data

East Anatolia is a region of high topography made up of a 2-km high plateau and Neogene and Quaternary volcanics overlying the subduction-accretion complex formed by the process of collision. The aeromagnetic and gravity data surveyed by the Mineral Research and Exploration (MTA) of Turkey have been used to interpret qualitatively the characteristics of the near-surface geology of the region. The residual aeromagnetic data were low-pass filtered and analyzed to produce the estimates of magnetic bottom using the centroid method and by forward modelling of spectra to evaluate the uncertainties in such estimates. The magnetic bottom estimates can be indicative of temperatures in the crust because magnetic minerals lose their spontaneous magnetization at the Curie temperature of the dominant magnetic minerals in the rocks and, thus, also are called Curie point depths (CPDs). The Curie point depths over the region of Eastern Anatolia vary from 12.9 to 22.6 km. Depths computed from forward modelling of spectra with 200–600 km window sizes suggest that the bottom depths from East Anatolia from the magnetic data may have errors exceeding 5 km; however, most of the obtained depths appear to lie in the above range and indicate that the lower crust is either demagnetized or non-magnetic. In the interpretation of the magnetic map, we also used reduction-to-pole (RTP) and amplitude of total gradient of high-pass filtered anomalies, which reduced dipolar orientation effects of induced aeromagnetic anomalies. However, the features of the RTP and the total gradient of the high-pass filtered aeromagnetic anomalies are not highly correlated to the hot spring water locations. On the other hand, many high-amplitude features seen on the total gradient map can be correlated with the ophiolitic rocks observed on the surface. This interpretation is supported by Bouguer gravity data. In this paper, we recommend that the sources of the widespread thermal activity seen in East Anatolia must be investigated individually by means of detailed mapping and modelling of high resolution geophysical data to assess further the geothermal potential of the region.