Laboratory methods for evaluating migrated high molecular weight hydrocarbons in marine sediments at naturally occurring oil seeps

A laboratory study has been conducted to determine the best methods for the detection of C₁₀–C₄₀ hydrocarbons at naturally occurring oil seeps in marine sediments. The results indicate that a commercially available method using n-C₆ to extract sediments and gas chromatography–flame ionization detection (GC–FID) to screen the resulting extract is effective at recognizing the presence of migrated hydrocarbons at concentrations from 50 to 5000 ppm. When non-biodegraded, the amount of oil charge is effectively tracked by the sum of n-alkanes in the gas chromatogram. However, once the charge oil becomes biodegraded, with the loss of n-alkanes and isoprenoids, the amount of oil is tracked by the quantification of the unresolved complex mixture (UCM). Gas chromatography–mass spectrometry (GC–MS) was also found to be very effective for the recognition of petroleum related hydrocarbons and results indicate that GC–MS would be a very effective tool for screening samples at concentrations below 50 ppm oil charge.     

Fluxes of selected trace metals from the Seine estuary to the eastern English Channel during the period August 1994 to July 1995

Two sampling cruises conducted in the Seine estuary (France) under low-water and flood conditions produced high resolution profiles for dissolved cadmium, lead, copper, zinc and nickel concentrations versus salinity. The distribution of dissolved trace metals differed depending on hydrologic conditions, partly because of the dilution of upstream inputs during flood periods. Daily fluxes of these dissolved trace metals were estimated for the two sampling periods (September 1994 and February 1995) by extrapolating the dilution lines observed in higher salinity waters to salinity=0 and then multiplying the effective freshwater concentrations thus obtained by the corresponding freshwater flow. Several procedures were subsequently applied to deduce each daily flux for the year studied from data for these two periods. A consensus was found among these procedures, allowing the determination of net fluxes of dissolved trace metals with a precision of 20–35%. The net fluxes thus estimated were 4 T yr⁻¹ for Cd, 4 T yr⁻¹ for Pb, 40 T yr⁻¹ for Cu, 130 T yr⁻¹ for Zn and 50 T yr⁻¹ for Ni.     

Contour current imprints and contourite drifts in the Bahamian archipelago

New data collected along the slopes of Little and Great Bahama Bank and the abyssal plain of the Bahama Escarpment provides new insights about contour current‐related erosive structures and associated deposits. The Bahamian slope shows abundant evidence of bottom current activity such as furrows, comet‐like structures, sediment waves and drifts. At a seismic scale, large erosion surfaces and main periods of drift growth resulted from current acceleration related to plate tectonic processes and progressive opening and closure of gateways and long‐term palaeoclimate evolution. At present‐day, erosion features and contourite drifts are either related to relatively shallow currents (<1000 m water depth) or to deep currents (>2500 m water depth). It appears that the carbonate nature of the drifts does not impact the drift morphology at the resolution addressed in the present study. Classical drift morphologies defined in siliciclastic environments are found, such as mounded, plastered and separated drifts. In core, contourite sequences show a bi‐gradational trend that resembles classical contourite sequences in siliciclastic deposits showing a direct relationship with a change in current velocity at the sea floor. However, in a carbonate system the peak in grain size is associated with increased winnowing rather than increased sediment supply as in siliciclastic environments. In addition, the carbonate contourite sequence is usually thinner than in siliciclastics because of lower sediment supply rates. Little Bahama Bank and Great Bahama Bank contourites contain open‐ocean input and slope‐derived debris from glacial episodes. Inner platform, platform edge and open ocean pelagic input characterize the classical periplatform ooze during interglacials. In all studied examples, the drift composition depends on the sea floor topography surrounding the drift location and the type of sediment supply. Carbonate particles are derived from either the slope or the platform in slope and toe of slope drifts, very deep contourites have distant siliciclastic sources of sediment supply. The recent discovery of the importance of a large downslope gravitary system along Bahamian slopes suggests frequent interactions between downslope and along‐slope (contour currents) processes. The interlayering of mass flow deposits and contourites at a seismic scale or the presence of surface structures associated with both contour currents and mass flow processes shows that both processes act at the same location. Finally, contour currents have an important impact on the repartition of deep‐water coral mounds. Currents can actively interact with mounds as a nutrient and oxygen supplier or have a passive interaction, with mounds solely being obstacles orienting erosion and deposition.     

Nile floods recorded in deep Mediterranean sediments

Clastic mud beds rich in continental organic matter are observed recurrently in the Nile deep-sea turbidite system. They formed during flooding periods of the river similar to those that induce sapropel formation and occurred during periods of increased density stratification of the eastern Mediterranean. The very fine-grained flood deposits are intercalated within pelagic sediments, sapropels and Bouma-type turbidites. These flood deposits form by the successive reconcentrations of surface (hypopycnal) plumes by convective sedimentation, which in turn generate a fine-grained low-energy hyperpycnal flow. Sea-level high stands seem also to favor hypopycnal plume formation and increase clastic mud bed formation. Consequently, these muddy clastic beds provide a direct link between deep-marine sedimentary records and continental climatic change through flood frequency and magnitude.     

Interactions between Volatile Reduced Sulfur Compounds and Metals in the Seine Estuary (France)

Concentrations of volatile hydrogen sulfide (H₂S), carbonyl sulfide (OCS), methane thiol (MeSH), dimethyl sulfide (DMS), and dimethyl disulfide (DMDS) in the Seine estuary (France) were investigated in spring 2005 using samples collected from the first meter beneath the surface. Levels of dissolved metals (Ag, Cd, Cu, Zn, Ni, Co, Pb), suspended particulate matter, and particular organic carbon were also assessed. Maximum concentrations were 0.80 nM for H₂S, 0.64 nM for OCS, 3.06 nM for MeSH, 11.06 nM for DMS, and 1.18 nM for DMDS, and different features were observed for the five volatile reduced sulfur compounds (VRSCs). Experiments were conducted to determine silver–VRSC conditional stability constants. Major interactions were observed between H₂S and Ag, which may partially account for the absence of volatile H₂S at the lowest salinities. OCS, MeSH, and DMS did not interact with Ag, as revealed by their insignificant K′ values. Variations in concentrations along the salinity gradient may be explained by the influence of phytoplanktonic compounds.     

Exploration tree approach to estimate historical earthquakes Mw and depth,test cases from the French past seismicity

The estimation of the seismological parameters of historical earthquakes is a key step when performing seismic hazard assessment in moderate seismicity regions as France. We propose an original method to assess magnitude and depth of historical earthquakes using intensity data points. A flowchart based on an exploration tree (ET) approach allows to apply a consistent methodology to all the different configurations of the earthquake macroseismic field and to explore the inherent uncertainties. The method is applied to French test case historical earthquakes, using the SisFrance (BRGM, IRSN, EDF) macroseismic database and the intensity prediction equations (IPEs) calibrated in the companion paper (Baumont et al. Bull Earthq Eng, 2017). A weighted least square scheme allowing for the joint inversion of magnitude and depth is applied to earthquakes that exhibit a decay of intensity with distance. Two cases are distinguished: (1) a “Complete ET” is applied to earthquakes located within the metropolitan territory, while (2) a “Simplified ET” is applied to both, offshore and cross border events, lacking information at short distances but disposing of reliable data at large ones. Finally, a priori-depth-based magnitude computation is applied to ancient or poorly documented events, only described by single/sporadic intensity data or few macroseismic testimonies. Specific processing of “felt” testimonies allows exploiting this complementary information for poorly described earthquakes. Uncertainties associated to magnitude and depth estimates result from both, full propagation of uncertainties related to the original macroseismic information and the epistemic uncertainty related to the IPEs selection procedure.