An investigation of the SO2 content of the venusian mesosphere using SPICAV-UV in nadir mode

Using the SPICAV-UV spectrometer aboard Venus Express in nadir mode, we were able to derive spectral radiance factors in the middle atmosphere of Venus in the 170-320 nm range at a spectral resolution of R ? 200 during 2006 and 2007 in the northern hemisphere. By comparison with a radiative transfer model of the upper atmosphere of Venus, we could derive column abundance above the visible cloud top for SO₂ using its spectral absorption bands near 280 and 220 nm. SO₂ column densities show large temporal and spatial variations on a horizontal scale of a few hundred kilometers. Typical SO₂ column densities at low latitudes (up to 50°N) were found between 5 and 50 μm-atm, whereas in the northern polar region SO₂ content was usually below 5 μm-atm. The observed latitudinal variations follow closely the cloud top altitude derived by SPICAV-IR and are thought to be of dynamical origin. Also, a sudden increase of SO₂ column density in the whole northern hemisphere has been observed in early 2007, possibly related to a convective episode advecting some deep SO₂ into the upper atmosphere.     

Confirmation of beach accretion by grain-size trend analysis: Camposoto beach, Cádiz, SW Spain

An application of the grain size trend analysis (GSTA) is used in an exploratory approach to characterize sediment transport on Camposoto beach (Cádiz, SW Spain). In May 2009 the mesotidal beach showed a well-developed swash bar on the upper foreshore, which was associated with fair-weather conditions prevailing just before and during the field survey. The results were tested by means of an autocorrelation statistical test (index I of Moran). Two sedimentological trends were recognized, i.e. development towards finer, better sorted and more negatively skewed sediment (FB–), and towards finer, better sorted and less negatively or more positively skewed sediment (FB+). Both vector fields were compared with results obtained from more classical approaches (sand tracers, microtopography and current measurements). This revealed that both trends can be considered as realistic, the FB+ trend being identified for the first time in a beach environment. The data demonstrate that, on the well-developed swash bar, sediment transported onshore becomes both finer and better sorted towards the coast. On the lower foreshore, which exhibits a steeper slope produced by breaking waves, the higher-energy processes winnow out finer particles and thereby produce negatively skewed grain-size distributions. The upper foreshore, which has a flatter and smoother slope, is controlled by lower-energy swash-backwash and overwash processes. As a result, the skewness of the grain-size distributions evolves towards less negative or more positive values. The skewness parameter appears to be distributed as a function of the beach slope and, thus, reflects variations in hydrodynamic energy. This has novel implications for coastal management.

Seismic stratigraphy of Lago Puyehue (Chilean Lake District): new views on its deglacial and Holocene evolution

Prior to the collection of a series of sediment cores, a high- and very-high-resolution reflection seismic survey was carried out on Lago Puyehue, Lake District, South-Central Chile. The data reveal a complex bathymetry and basin structure, with three sub-basins separated by bathymetric ridges, bedrock islands and interconnected channels. The sedimentary infill reaches a thickness of >200 m. It can be sub-divided into five seismic-stratigraphic units, which are interpreted as: moraine, ice-contact or outwash deposits (Unit I), glacio-lacustrine sediments rapidly deposited in a proglacial or subglacial lake at the onset of deglaciation (Unit II), lacustrine fan deposits fed by sediment-laden meltwater streams in a proglacial lake (Unit III), distal deposits of fluvially derived sediment in an open, post-glacial lake (Unit IV) and authigenic lacustrine sediments, predominantly of biogenic origin, that accumulated in an open, post-glacial lake (Unit V). This facies succession is very similar to that observed in other glacial lakes, and minor differences are attributed to an overall higher depositional energy and higher terrigenous input caused by the strong seismic and volcanic activity in the region combined with heavy precipitation. A long sediment core (PU-II core) penetrates part of Unit V and its base is dated as 17,915 cal. yr. BP. Extrapolation of average sedimentation rates yields an age of ca. 24,750 cal. yr. BP for the base of Unit V, and of ca. 28,000 cal. yr. BP for the base of Unit IV or for the onset of open-water conditions. This is in contrast with previous glacial-history reconstructions based on terrestrial records, which date the complete deglaciation of the basin as ca. 14,600 cal. yr. BP. This discrepancy cannot be easily explained and highlights the need for more lacustrine records from this region. This is the second in a series of eight papers published in this special issue dedicated to the 17,900 year multi-proxy lacustrine record of Lago Puyehue, Chilean Lake District. The papers in this special issue were collected by M. De Batist, N. Fagel, M.-F. Loutre and E. Chapron.     

Elasticity of antigorite,seismic detection of serpentinites,and anisotropy in subduction zones

Serpentinization of the mantle wedge is an important process that influences the seismic and mechanical properties in subduction zones. Seismic detection of serpentines relies on the knowledge of elastic properties of serpentinites, which thus far has not been possible in the absence of single-crystal elastic properties of antigorite. The elastic constants of antigorite, the dominant serpentine at high-pressure in subduction zones, were measured using Brillouin spectroscopy under ambient conditions. In addition, antigorite lattice preferred orientations (LPO) were determined using an electron back-scattering diffraction (EBSD) technique. Isotropic aggregate velocities are significantly lower than those of peridotites to allow seismic detection of serpentinites from tomography. The isotropic V_P/V_S ratio is 1.76 in the Voigt–Reuss–Hill average, not very different from that of 1.73 in peridotite, but may vary between 1.70 and 1.86 between the Voigt and Reuss bonds. Antigorite and deformed serpentinites have a very high seismic anisotropy and remarkably low velocities along particular directions. V_P varies between 8.9 km s^? 1 and 5.6 km s^? 1 (46% anisotropy), and 8.3 km s^? 1 and 5.8 km s^? 1 (37%), and V_S between 5.1 km s^? 1 and 2.5 km s^? 1 (66%), and 4.7 km s^? 1 and 2.9 km s^? 1 (50%) for the single-crystal and aggregate, respectively. The V_P/V_S ratio and shear wave splitting also vary with orientation between 1.2 and 3.4, and 1.3 and 2.8 for the single-crystal and aggregate, respectively. Thus deformed serpentinites can present seismic velocities similar to peridotites for wave propagation parallel to the foliation or lower than crustal rocks for wave propagation perpendicular to the foliation. These properties can be used to detect serpentinite, quantify the amount of serpentinization, and to discuss relationships between seismic anisotropy and deformation in the mantle wedge. Regions of high V_P/V_S ratios and extremely low velocities in the mantle wedge of subduction zones (down to about 6 and 3 km.s^?1 for V_P and V_S, respectively) are difficult to explain without strong preferred orientation of serpentine. Local variations of anisotropy may result from kilometer-scale folding of serpentinites. Shear wave splittings up to 1–1.5 s can be explained with moderately thick (10–20 km) serpentinite bodies.     

Rock slope instability assessment using spatially distributed structural orientation data in Darjeeling Himalaya (India)

We discuss a geographic information system (GIS)‐based methodology for rock slope instability assessment based on geometrical relationships between topographic slopes and structural discontinuities in rocks. The methodology involves (a) regionalization of point observations of orientations (azimuth and dip) of structural discontinuities in rocks in order to generate a digital structural model (DStM), (b) testing the kinematical possibility of specific modes of rock slope failures by integrating DStMs and digital elevation model (DEM)‐derived slope and aspect data and (c) computation of stability scenarios with respect to identified rock slope failure modes. We tested the methodology in an area of 90 km² in Darjeeling Himalaya (India) and in a small portion (9 km²) within this area with higher density of field structural orientation data. The results of the study show better classification of rock slope instability in the smaller area with respect to known occurrences of deep‐seated rockslides than with respect to shallow translational rockslides, implying that structural control is more important for deep‐seated rockslides than for shallow translational rockslides. Results of scenario‐based analysis show that, in rock slopes classified to be unstable, stress‐induced rock slope instability tends to increase with increasing level of water saturation. The study demonstrates the usefulness of spatially distributed data of orientations of structural discontinuities in rocks for medium‐ to small‐scale classification of rock slope instability in mountainous terrains. Copyright © 2010 John Wiley & Sons, Ltd.     

Investigation of Ionospheric Response to Geomagnetic Storms over a Low Latitude Station,Ile-Ife,Nigeria

Due to several complexities associated with the equatorial ionosphere, and the significant role which the total electron content (TEC) variability plays in GPS signal transmission, there is the need to monitor irregularities in TEC during storm events. The GPS SCINDA receiver data at Ile-Ife, Nigeria, was analysed with a view to characterizing the ionospheric response to geomagnetic storms on 9 March and 1 October 2012. Presently, positive storm effects, peaks in TEC which were associated with prompt penetration of electric fields and changes in neutral gas composition were observed for the storms. The maximum percentage deviation in TEC of about 120 and 45% were observed for 9 March and 1 October 2012, respectively. An obvious negative percentage TEC deviation subsequent to sudden storm commencement (SSC) was observed and besides a geomagnetic storm does not necessarily suggest a high scintillation intensity (S₄) index. The present results show that magnetic storm events at low latitude regions may have an adverse effect on navigation and communication systems.     

Central Paratethys paleoenvironment during the Badenian (Middle Miocene): evidence from foraminifera and stable isotope (δ<Superscript>13</Superscript>C and δ<Superscript>18</Superscript>O) study in the Vienna Basin (Slovakia)

Stable isotope data of the foraminiferal carbonate shells and bulk sediment samples from the Central Paratethys were investigated to contribute to better knowledge of the paleoenvironmental changes in Badenian (Middle Miocene). Five benthic (Uvigerina semiornata, U. aculeata, Ammonia beccarii, Elphidium sp. and Heterolepa dutemplei) and three planktonic taxa (Globigerina bulloides, G. diplostoma and Globigerinoides trilobus), characterising the bottom, intermediate and superficial layers of the water column, were selected from the Vienna Basin (W Slovakia). The foraminiferal fauna and its isotope signal point out to temperature-stratified, nutrient-rich and consequently less-oxygenated marine water during the Middle/Late Badenian. Negative carbon isotope ratios indicate increased input of ¹²C-enriched organic matter to the bottom of the Vienna Basin. Positive benthic δ¹⁸O implies that the global cooling tendency recorded in the Middle Miocene has also affected the intramountain Vienna Basin. In this time, the Central Paratethys has been in the process of isolation. Our stable isotope trend suggests that the communication with Mediterranean Sea has been still more or less active on the south of Vienna Basin (Slovak part) in the Late Badenian, whereas the seawater exchange towards north was apparently reduced already during the Middle Badenian.     

Analysis of groundwater quality using water quality index and conventional graphical methods: the Volta region,Ghana

Conventional graphical and statistical methods were used with water quality indices to characterize the hydrochemistry of groundwater from the northern part of the Volta region of Ghana. The objective was to determine the processes that affect the hydrochemistry and the variation of these processes in space among the three main geological terrains: the Buem formation, Voltaian System and the Togo series that underlie the area, and to determine the suitability of groundwater from the area for drinking purposes. The Q-mode cluster analysis reveals three main water groups. The groups established from the Q-mode HCA appear to indicate different degrees of weathering which could further indicate varying levels of fracturing aquifer hydraulic properties. R-mode HCA and factor analysis (using varimax rotation and Kaiser Criterion) were then applied to determine the significant sources of variation in the hydrochemistry. This study finds that groundwater hydrochemistry in the area is controlled by the weathering of silicate and carbonate minerals, as well as the chemistry of infiltrating precipitation. Mineral activity diagrams for the CaO–Na₂O–Al₂O₃–SiO₂–H₂O and CaO–MgO–Al₂O₃–SiO₂–H₂O systems plotted for the area indicate stability in the smectite field and attribute hydrochemistry to the weathering of silicate minerals. Silicate mineral weathering and the effects of precipitation appear to be pervasive among all the three main geological terrains, whereas carbonate weathering is localized among the Voltaian aquifers. Cation exchange does not appear to play a significant role in the hydrochemistry but mild Water quality indices (WQI) were calculated for the samples using the concentrations of Na⁺, Ca²⁺, Mg²⁺, Cl⁻, NO₃ ⁻, F⁻, and EC at the various sample locations. The WQI values indicate that groundwater from the study area is of excellent quality for drinking purposes. WQI values from groundwater samples are averagely higher than samples taken from surface water sources in the area. This implies that geology has had an impact on the WQI of groundwater in the area.