Effect of reproductive state and sex on movement and food consumption of western rock lobster (Panulirus cygnus) in a tank environment

The catchability of western rock lobsters (Panulirus cygnus) during the spawning season (October and November) may be affected by their reproductive state. In this study, movement and food consumption of males and females of different reproductive states held in laboratory tanks were measured as proxies for catchability. Density of lobsters was found to influence both movement and food consumption. Solitary animals and, to a lesser extent, two lobsters per tank, were more sedentary and consumed significantly less food than animals at a density of three or four specimens per tank. Tests using three animals per tank confirmed that mature, unmated, and ovigerous females carrying early stage eggs moved more frequently away from their shelters than males or females carrying late stage eggs (P < 0.0001, d.f. = 3). Further, unmated females and females with early stage eggs recorded significantly higher food consumption (P < 0.0061, d.f. = 3) compared with males or females carrying late stage eggs. The greater time spent away from shelter and also food consumption make unmated females and females with early stage eggs likely to be more catchable than males or females with late stage eggs. As catchability is commonly used to obtain population estimates from survey data, these results have implications for surveys which use catch rates of breeding animals as indicators of egg production.     

Depth of settlement of two mussel species on suspended collectors in Marlborough Sounds,New Zealand (Note)

The preferred depth of settlement and settlement period of two species of mussel spat were monitored at Yncyca Bay (NZMS1 S15 220460) and Wet Inlet (NZMS1 S16 265432) in the Marlborough Sounds on collectors suspended in 0–4 m of water between 20 October 1975 and 4 April 1976. Peak settlement of Mytilus edulis aoteanus was between 20 October 1975 and 4 January 1976, and decreased with increasing depth. Peak settlement of Perna canaliculus was between 16 February 1976 and 12 April 1976, and showed no preferred depth of settlement.

Capture of wild stocks of Mytilus edulis aoteanus and Perna canaliculus spat for use in aquaculture has become more reliable through accurate forecasting of peak settlement periods, and knowledge of preferred depth of settlement of the two species.

Preferred depth of settlement of spat may affect the shore zonation of mussels.     

Cadmium,lead, copper,and zinc in Elminius modestus Darwin (Crustacea,Cirripedia) from Waitemata and Manukau Harbours,Auckland, New Zealand

Abstract

Concentrations of cadmium (Cd), lead (Pb), copper (Cu), and zinc (Zn) were measured in adult barnacles (Elminius modestus Darwin) from Waitemata and Manukau Harbours in the Auckland area, New Zealand. As in studies on sediments reported in the literature, it was possible to identify areas of likely anthropogenic influence, e.g., around the Auckland Harbour Bridge for Pb, Cu, and Zn. Groups of individuals with highest concentrations for these metals showed 19.8–23.8 mg Pb kg^?1, 198–266 mg Cu kg^?1, and 4460–6530 mg Zn kg^?1 (95% confidence limits, dry weight basis). Cd concentrations found for all barnacles from the Auckland area ranged from 0.8 to 3.1 mg kg^?1. Two samples from Omaha Beach, 60 km north of Auckland, were used as a reference. Accordingly, groups of individuals with lowest concentrations for Pb, Cu, and Zn could be allocated to this site using the Student‐Newman‐Keuls Multiple Range Test (0.5–1.3 mg Pb kg^?1, 8–10 mg Cu kg^?1, and 144–214 mg Zn kg^?1 ; 95% confidence limits). Only Cd concentrations were highest at Omaha Beach (8.6–12.1 mg Cd kg^?1 ). This result may have arisen from “naturally” increased bio‐availabilities of certain metals in mangrove systems which are reported in the literature. Generally, metal concentrations in barnacles from the Auckland Harbour area and from Omaha Beach were within the wider range for E. modestus as well as other barnacle species reported in the international literature.     

Behavior of soil plugs in open‐ended model piles driven into sands

Calibration chamber tests were conducted on open‐ended model piles driven into dried siliceous sands with different soil conditions in order to clarify the effect of soil conditions on load transfer mechanism in the soil plug. The model pile used in the test series was devised so that the bearing capacity of an open‐ended pile could be measured as three components: outside shaft resistance, plug resistance, and tip resistance. Under the assumption that the unit shaft resistance due to pile‐soil plug interaction varies linearly near the pile tip, the plug resistance was estimated. The plug capacity, which was defined as the plug resistance at ultimate condition, is mainly dependent on the ambient lateral pressure and relative density. The length of wedged plug that transfers the load decreases with the decrease of relative density, but it is independent of the ambient pressure and penetration depth. Under several assumptions, the value of earth pressure coefficient in the soil plug can be calculated. It gradually reduces with increase in the longitudinal distance from the pile tip. At the bottom of the soil plug, it tends to decrease with increase in the penetration depth and relative density, and to increase with the increase of ambient pressure. This may be attributed to (1) the decrease of friction angle as a result of increase in the effective vertical stress, (2) the difference in the dilation degree of the soil plug during driving with ambient pressures, and (3) the difference in compaction degree of soil plug during driving with relative densities. Based on the test results, an empirical equation was suggested to compute the earth pressure coefficient to be used in the calculation of plug capacity using one‐dimensional analysis, and it produces proper plug capacities for all soil conditions.     

Tropical precipitation anomalies and d‐excess evolution during El Niño 2014‐16

The last 2014‐16 El Niño event was among the three strongest episodes on record. El Niño considerably changes annual and seasonal precipitation across the tropics. Here, we present a unique stable isotope data set of daily precipitation collected in Costa Rica prior to, during, and after El Niño 2014‐16, in combination with Lagrangian moisture source and precipitation anomaly diagnostics. δ²H composition ranged from ‐129.4 to +18.1 (‰) while δ¹⁸O ranged from ‐17.3 to +1.0 (‰). No significant difference was observed among δ¹⁸O (P=0.186) and δ²H (P=0.664) mean annual compositions. However, mean annual d‐excess showed a significant decreasing trend (from +13.3 to +8.7 ‰) (P<0.001) with values ranging from +26.6 to ‐13.9 ‰ prior to and during the El Niño evolution. The latter decrease in d‐excess can be partly explained by an enhanced moisture flux convergence across the southeastern Caribbean Sea coupled with moisture transport from northern South America by means of an increased Caribbean Low Level Jet regime. During 2014‐15, precipitation deficit across the Pacific domain averaged 46% resulting in a very severe drought; while a 94% precipitation surplus was observed in the Caribbean domain. Understanding these regional moisture transport mechanisms during a strong El Niño event may contribute to a) better understanding of precipitation anomalies in the tropics and b) re‐evaluate past stable isotope interpretations of ENSO events in paleoclimatic archives within the Central America region.     

Efficient DEM‐based overland flow routing using integrated recursive algorithms

Two primary concerns in performing watershed overland flow routing are the numerical instability and computational efficiency. The stability of executing an explicit scheme has to be maintained by observing the Courant–Friedrich–Lewy criterion, which is adopted to confirm that the numerical marching speed is larger than the wave celerity. Moreover, there is another criterion of time step devised in previous studies to avoid back‐and‐forth refluxing between adjacent grids. The situation of refluxing usually occurs on flat regions. In light of this, the selection of a small time increment to honor both restrictions simultaneously is believed to decrease the computational efficiency in performing overland flow routing. This study aims at creating a robust algorithm to relax both restrictions. The proposed algorithm was first implemented on a one‐dimensional overland plane to evaluate the accuracy of the numerical result by comparing it with an analytical solution. Then, the algorithm was further applied to a watershed for 2D runoff simulations. The results show that the proposed integrated algorithm can provide an accurate runoff simulation and achieve satisfactory performance in terms of computational speed.     

The role of eddies in solute transport and recovery in rock fractures: Implication for groundwater remediation

A better understanding of solute transport and retention mechanism in rock fractures has been challenging due to difficulty in their direct observations in microscale rough‐walled fractures. Six representative troughs in a rough‐walled fracture were selected for microscale observations of eddy formation with increasing flow velocity and its effect on spatiotemporal changes of solute concentration. This experimental study was enabled by a microscale visualization technique of micro particle image velocimetry. With increasing flow velocity (Re ≤ 2.86), no eddies were generated, and solutes along the main streamlines transported rapidly, whereas those near the wall moved slowly. A larger amount of solutes remained trapped at all troughs at Re = 2.86 than Re < 1. For Re = 8.57, weak eddies started to be developed at the troughs on the lee side, which little contributed to overall solute flushing in the fracture. Accordingly, a large of amount of water was needed for solute flushing. The flow condition of 1 < Re < 10, before a full development of eddies, was least favourable in terms of time and amount of remediation fluid required to reach a target concentration. After large eddies were fully developed at troughs on the lee side for Re = 17.13, solutes were substantially reduced by eddies with less amount of water. Fully developed eddies were found to enhance solute transport and recovery, as opposed to a general consensus that eddies trap and delay solutes. Direct inflow into troughs on the stoss side also made a great contribution to solute flushing out of the troughs. This study indicates that fully developed eddies or strong inflows at troughs are highly possible to form for Re > 10 and this flow range could be favourable for efficient remediation.     

Polygonal grain‐based distinct element modeling for mechanical behavior of brittle rock

The microstructure of rock was numerically reproduced by a polygonal grain‐based model, and its mechanical behavior was examined by performing the uniaxial compression test and Brazilian tests via the Universal Distinct Element Code. The numerical results of the model demonstrated good agreement with the experimental results obtained with rock specimens in terms of the stress–strain behavior, strength characteristics, and brittle fracture phenomenon. An encouraging result is that the grain‐based model‐Universal Distinct Element Code model can reproduce a low ratio of tensile to compressive strength of 1/20 to 1/10 without the need for an additional process. This finding is ascribed to the fact that the geometrical features of polygons can effectively capture the effects of angularity, finite rotation, and interlocking of grains that exist in reality. A numerical methodology to monitor the evolution of micro‐cracks was developed, which enabled us to examine the progressive process of the failure and distinguish the contribution of tensile cracking to the process from that of shear cracking. From the observations of the micro‐cracking process in reference to the stress–strain relation, crack initiation stress, and crack damage stress, it can be concluded that the failure process of the model closely resembles the microscopic observations of rock. We also carried out a parametric study to examine the relationships between the microscopic properties and the macroscopic behavior of the model. Depending on the micro‐properties, the model exhibited a variety of responses to the external load in terms of the strength and deformation characteristics, the evolution of micro‐cracks, and the post‐peak behavior. Copyright © 2016 John Wiley & Sons, Ltd.     

Numerical simulation of the response of a reinforced wall to a high speed train passage

The dynamic response of a mechanically stabilized earth wall to the passing of a high‐speed train is modelled using the finite element method. A three‐dimensional analysis is carried out, using a specific framework that allows performing the analysis with a moderate computational effort. In the first place, a so‐called multiphase approach is used to take into account the reinforcing strips. The moving load is taken into account by performing the calculation in a mobile referential using the properties of symmetry of the train cars and a simplifying assumption of periodicity for the whole train. We also assume a steady state. A partial validation of the approach is obtained by means of a comparison with an analytical solution. The quick increase in displacements induced by the train passing when the speed comes close to the celerity of Rayleigh waves clearly appears in the results. The vertical displacements, vertical stresses in the backfill, tensile forces in the strips and the influence of the stiffness of the soil are discussed. Copyright © 2017 John Wiley & Sons, Ltd.     

Generation of continuous surface soil moisture dataset using combined optical and thermal infrared images

Surface soil moisture (SSM) is a critical variable for understanding water and energy flux between the atmosphere and the Earth's surface. An easy to apply algorithm for deriving SSM time series that primarily uses temporal parameters derived from simulated and in situ datasets has recently been reported. This algorithm must be assessed for different biophysical and atmospheric conditions by using actual geostationary satellite images. In this study, two currently available coarse‐scale SSM datasets (microwave and reanalysis product) and aggregated in situ SSM measurements were implemented to calibrate the time‐invariable coefficients of the SSM retrieval algorithm for conditions in which conventional observations are rare. These coefficients were subsequently used to obtain SSM time series directly from Meteosat Second Generation (MSG) images over the study area of a well‐organized soil moisture network named REMEDHUS in Spain. The results show a high degree of consistency between the estimated and actual SSM time series values when using the three SSM dataset‐calibrated time‐invariable coefficients to retrieve SSM, with coefficients of determination (R²) varying from 0.304 to 0.534 and root mean square errors ranging from 0.020 m³/m³ to 0.029 m³/m³. Further evaluation with different land use types results in acceptable debiased root mean square errors between 0.021 m³/m³ and 0.048 m³/m³ when comparing the estimated MSG pixel‐scale SSM with in situ measurements. These results indicate that the investigated method is practical for deriving time‐invariable coefficients when using publicly accessed coarse‐scale SSM datasets, which is beneficial for generating continuous SSM dataset at the MSG pixel scale.