New aspects on the interconnection between precursory seismic electric signal lead time and geodynamics in the northern Aegean Sea

New insights on the deformation process of a confined region in the northern Aegean Sea corroborates the claims that the observed long lead times of the precursory seismic electric signals of the two largest earthquakes which occurred within the last 15 years in the area are attributed to specific geodynamics. Possible underlying physics are also discussed.     

Longevity and progressive abandonment of the Rocky Flats surface, Front Range, Colorado

The post-orogenic evolution of the Laramide landscape of the western U.S. has been characterized by late Cenozoic channel incision of basins and their adjacent ranges. One means of constraining the incision history of basins is dating the remnants of gravel-capped surfaces above modern streams. Here, we focus on an extensive remnant of the Rocky Flats surface between Golden and Boulder, Colorado, and use in situ-produced ¹⁰Be and ²⁶Al concentrations in terrace alluvium to constrain the Quaternary history of this surface. Coal and Ralston Creeks, both tributaries of the South Platte River, abandoned the Rocky Flats surface and formed the Verdos and Slocum pediments, which are cut into Cretaceous bedrock between Rocky Flats and the modern stream elevations. Rocky Flats alluvium ranges widely in age, from > 2 Ma to  400 ka, with oldest ages to the east and younger ages closer to the mountain front. Numerical modeling of isotope concentration depth profiles suggests that individual sites have experienced multiple resurfacing events. Preliminary results indicate that Verdos and Slocum alluvium along Ralston Creek, which is slightly larger than Coal Creek, is several hundred thousand years old. Fluvial incision into these surfaces appears therefore to progress headward in response to downcutting of the South Platte River. The complex ages of these surfaces call into question any correlation of such surfaces based solely on their elevation above the modern channel.     

Stepwise inversion of a groundwater flow model with multi-scale observation data

Based on the regional hydrogeology and the stratigraphy beneath the Los Alamos National Laboratory (LANL) site, New Mexico (USA), a site-scale groundwater model has been built with more than 20 stratified hydrofacies. A stepwise inverse method was developed to estimate permeabilities for these hydrofacies by coupling observation data from different sources and at various spatial scales including single-well test, multiple-well pumping test and regional aquifer monitoring data. Statistical analyses of outcrop permeability measurements and single-well test results were used to define the prior distributions of the parameters. These distributions were used to define the parameter initial values and the lower and upper bounds for inverse modeling. A number of inverse modeling steps were performed including the use of drawdown data from the pump tests at two wells (PM-2 and PM-4) separately, and a joint inversion coupling PM-2 and PM-4 pump test data and head data from regional aquifer monitoring. Parameter sensitivity coefficients for different data sets were computed to analyze if the model parameters can be estimated accurately with the data provided at different steps. The joint inversion offers a reasonable fit to all data sets. The uncertainty of estimated parameters for the hydrofacies is addressed with the parameter confidence intervals.     

Recent advances in subseafloor hydrogeology: focus on basement–sediment interactions, subduction zones, and continental slopes

Focused, interdisciplinary research in the subseafloor environment has advanced our understanding of fluid flow paths and the interrelationship between fluid pressure and deformation, heat flow, and diagenesis. Recent investigations in the Pacific Ocean, the Gulf of Mexico, and the North Sea provide examples of high rates of fluid flow in the permeable basement, with the flow affecting properties of overlying sediments. There are also some indications that flow could continue into subduction. Studies on continental slopes provide evidence for sedimentation-driven overpressures that can destabilize slopes. These studies particularly emphasize the contributions of lateral flow driven by uneven loading. Similarly, evidence continues to build that stratigraphic horizons and faults help to dewater subduction zones. A recent development is the monitoring of pore pressure, temperatures, flow, and fluid chemistry, which aids the understanding of transient behavior and response to strain events.     

Using hyperspectral plant signatures for CO<Subscript>2</Subscript> leak detection during the 2008 ZERT CO<Subscript>2</Subscript> sequestration field experiment in Bozeman,Montana

Hyperspectral plant signatures can be used as a short-term, as well as long-term (100-year timescale) monitoring technique to verify that CO₂ sequestration fields have not been compromised. An influx of CO₂ gas into the soil can stress vegetation, which causes changes in the visible to near-infrared reflectance spectral signature of the vegetation. For 29 days, beginning on July 9, 2008, pure carbon dioxide gas was released through a 100-m long horizontal injection well, at a flow rate of 300 kg day⁻¹. Spectral signatures were recorded almost daily from an unmown patch of plants over the injection with a “FieldSpec Pro” spectrometer by Analytical Spectral Devices, Inc. Measurements were taken both inside and outside of the CO₂ leak zone to normalize observations for other environmental factors affecting the plants. Four to five days after the injection began, stress was observed in the spectral signatures of plants within 1 m of the well. After approximately 10 days, moderate to high amounts of stress were measured out to 2.5 m from the well. This spatial distribution corresponded to areas of high CO₂ flux from the injection. Airborne hyperspectral imagery, acquired by Resonon, Inc. of Bozeman, MT using their hyperspectral camera, also showed the same pattern of plant stress. Spectral signatures of the plants were also compared to the CO₂ concentrations in the soil, which indicated that the lower limit of soil CO₂ needed to stress vegetation is between 4 and 8% by volume.     

Petrogenesis of municipal solid waste combustion bottom ash

A petrographic study was conducted on a suite of bottom ash particles from 3 different modern municipal solid waste combustors. The object of the study was to evaluate the mineralogical characteristics and formation process of the bottom ash by using standard geological techniques of light microscopy, electron microscopy, and X-ray microanalysis. This information was subsequently used to model the bottom ash petrogenesis based upon an examination of the mineralogy, melt structure, and composition of the ash.Bottom ash can be divided into two major groups: 1) refractory waste products and 2) melt products. The refractory waste products consist largely of rock and mineral fragments, various waste metals, and unmelted glass shards. The melt products consist of two distinct glasses: 1) isotropic glass, and 2) opaque glass. Complex silicate minerals are precipitated from and are abundant in the isotropic glass whereas both metal oxide and silicate minerals are precipitated from the opaque glass.The isotropic and opaque glasses formed simultaneously in different locations on the combustor grate. The contrast in melting (liquidus) temperatures shown by these glasses suggests that the isotropic melts were produced at localized hot spots (1500°C to 1650°C) and the opaque melts formed at cold spots (1150°C to 1400°C) on the grate. This could be the result of heterogeneous distribution of combustible municipal solid waste on the grate or from localized hot spots where air is introduced through the grates. In some instances the two glasses then had the opportunity to variably mix with each other. Fe-oxides represent waste metal fragments that were assimilated by melting and later recrystallized.Bottom ash is produced via a co-mingled two melt system that forms melilite-bearing, alkaline, volcanic-like rocks. The great similarity of the bottom ash residues between these 3 different MSW combustors suggests that, despite variable combustor designs and heterogeneous waste feed, high temperature combustion of MSW produces bottom ash of fairly uniform composition and structure that formed via the petrogenetic process described above. Alterations to the combustion process or implementations of secondary treatment technologies may render the bottom ash residue into a more environmentally stable material better suited for aggregate or long term secure disposal in landfills.     

Discovery of A New Class of Pulsating Stars: Gravity-mode Pulsators among Subdwarf B Stars

During the course of an ongoing CCD monitoring program to investigate low-level light variations in subdwarf B (sdB) stars, weserendipitously discovered a new class of multimode pulsators withperiods of the order of an hour. These periods are a factor of tenlonger than those of previously known multimode sdB pulsators (EC14026 stars), implying the new pulsations are due to gravity modes rather than pressure modes. The iron opacity instability that drives the short period EC 14026 stars is effective in hot sdB's. Thelong period pulsators are found only among cooler sdB stars, wherethey are surprisingly common. The mechanism responsible for excitingthe deeper g-modes in cool sdB's is currently unknown, but thetemperature and gravity range in which these stars occur must be animportant clue. We present the first observational results for thisnew class of pulsating sdB stars, and discuss some possible implications.     

Ridges and tidal stress on Io

Sets of ridges of uncertain origin are seen in twenty-nine high-resolution Galileo images, which sample seven locales on Io. These ridges are on the order of a few kilometers in length with a spacing of about a kilometer. Within each locale, the ridges have a consistent orientation, but the orientations vary from place to place. We investigate whether these ridges could be a result of tidal flexing of Io by comparing their orientations with the peak tidal stress orientations at the same locations. We find that ridges grouped near the equator are aligned either north-south or east-west, as are the predicted principal stress orientations there. It is not clear why particular groups run north-south and others east-west. The one set of ridges observed far from the equator (52° S) has an oblique azimuth, as do the tidal stresses at those latitudes. Therefore, all observed ridges have similar orientations to the tidal stress in their region. This correlation is consistent with the hypothesis that tidal flexing of Io plays an important role in ridge formation.