U–Pb ages of detrital zircons from Paleozoic metasandstones of the Gelnica Terrane (Southern Gemeric Unit, Western Carpathians, Slovakia): evidence for Avalonian–Amazonian provenance

U–Pb (SHRIMP) determinations on detrital zircons from the Early Paleozoic Gelnica Terrane metasandstones and their Permian overlap sediments of the Inner Western Carpathian Southern Gemeric Unit define five age populations based on age-probability plots. The metasandstones were sampled for detrital zircons from six stratigraphic levels, four of them in the Late Cambrian/Ordovician Gelnica Terrane metasandstones and the two in Permian envelope sequence. The data set includes 84 U–Pb ages for individual detrital zircons. These ages are combined with the previously dated inherited zircons from the associated metavolcanites (n?=?31). The majority of the pre-Permian detrital and inherited zircons (95%) belong to the three main populations: population A—the Paleoproterozoic/Neoarchean ages ranging from 1.75 to 2.6?Ga; population B—the Mesoproterozoic ages with the range of 0.9 to 1.1?Ga; population C—the Neoproterozoic ages, ranging from 560 to 807?Ma. The detrital zircon age spectrum from the basal Permian sediments reflects the strong recycling from the underlying Gelnica Terrane, with the presence of the dominant Precambrian C and B populations (94% of total), including the minor populations A. The range of the detrital zircon ages from the Late Permian sandstones is wider, with additional population D, ranging from 497 to 450?Ma and population E with a time span from 369 to 301?Ma. Within the Late Permian detrital zircon assemblage, the Proterozoic population A?+?B?+?C form only 25% of total. The detrital zircon data suggest that the Gelnica Terrane belongs to the peri-Gondwanan terrane with a source area located on the northwestern margin of Gondwana close to Amazonia. This terrane should have travelled a long distance in the Phanerozoic times.     

Shallow water tidal currents in close proximity to the seafloor and boundary-induced turbulence

Velocity measurements with vertical resolution 0.02 m were conducted in the lowest 0.5 m of the water column using acoustic Doppler current profiler (ADCP) at a test site in the western part of the East China Sea. The friction velocity u _* and the turbulent kinetic energy dissipation rate ε _wl(ζ) profiles were calculated using log-layer fits; ζ is the height above the bottom. During a semidiurnal tidal cycle, u _* was found to vary in the range (1–7) × 10⁻³ m/s. The law-of-the-wall dissipation profiles ε _wl(ζ) were consistent with the dissipation profiles ε _mc(ζ) evaluated using independent microstructure measurements of small-scale shear, except in the presence of westward currents. It was hypothesized that an isolated bathymetric rise (25 m height at a 50-m seafloor) located to the east of the measurement site is responsible for the latter. Calculation of the depth integrated internal tide generating body force in the region showed that the flanks of the rise are hotspots of internal wave energy that may locally produce a significant turbulent zone while emitting tidal and shorter nonlinear internal waves. This distant topographic source of turbulence may enhance the microstructure-based dissipation levels ε _mc(ζ) in the bottom boundary layer (BBL) beyond the dissipation ε _wl(ζ) associated with purely locally generated turbulence by skin currents. Semi-empirical estimates for dissipation at a distance from the bathymetric rise agree well with the BBL values of ε _mc measured 15 km upslope.     

The fossil phase in the life of a galaxy group

We investigate the origin and evolution of fossil groups in a concordance ΛCDM cosmological simulation. We consider haloes with masses between  1 × 10¹³  and  5 × 10¹³  h ⁻¹ M_⊙  , and study the physical mechanisms that lead to the formation of the large gap in magnitude between the brightest and the second most bright group member, which is typical for these fossil systems. Fossil groups are found to have high dark matter concentrations, which we can relate to their early formation time. The large magnitude gaps arise after the groups have built up half of their final mass, due to merging of massive group members. We show that the existence of fossil systems is primarily driven by the relatively early infall of massive satellites, and that we do not find a strong environmental dependence for these systems. In addition, we find tentative evidence for fossil group satellites falling in on orbits with typically lower angular momentum, which might lead to a more efficient merger on to the host. We find a population of groups at higher redshifts that go through a 'fossil phase': a stage where they show a large magnitude gap, which is terminated by renewed infall from their environment.     

Evidence for solar forcing in variability of temperatures and pressures in Europe

Daily temperature and pressure series from 55 European meteorological stations covering the 20th century are analyzed. The overall temperature mean displays a sharp minimum near 1940 and a step-like jump near 1987. We evaluate the evolution of disturbances of these series using mean squared inter-annual variations and “lifetimes”. The decadal to secular evolutions of solar activity and temperature disturbances display similar signatures over the 20th century. Because of heterogeneity of the climate system response to solar forcing, regional and seasonal approaches are key to successful identification of these signatures. Most of the solar response is governed by the winter months, as best seen near the Atlantic Ocean. Intensities of disturbances vary by factors in excess of 2, underlining a role for the Sun as a significant forcing factor of European atmospheric variations. We speculate about the possible origin of these solar signatures. The last figure of the paper exemplifies its main results.     

Seasonal dynamics and stoichiometry of the planktonic community in the NW Mediterranean Sea: a 3D modeling approach

The 3D hydrodynamic Model for Applications at Regional Scale (MARS3D) was coupled with a biogeochemical model developed with the Ecological Modular Mechanistic Modelling (Eco3M) numerical tool. The three-dimensional coupled model was applied to the NW Mediterranean Sea to study the dynamics of the key biogeochemical processes in the area in relation with hydrodynamic constraints. In particular, we focused on the temporal and spatial variability of intracellular contents of living and non-living compartments. The conceptual scheme of the biogeochemical model accounts for the complex food web of the NW Mediterranean Sea (34 state variables), using flexible plankton stoichiometry. We used mechanistic formulations to describe most of the biogeochemical processes involved in the dynamics of marine pelagic ecosystems. Simulations covered the period from September 1, 2009 to January 31, 2011 (17 months), which enabled comparison of model outputs with situ measurements made during two oceanographic cruises in the region (Costeau-4: April 27–May 2, 2010 and Costeau-6: January 23–January 27, 2011).     

Numerical modeling of 3D fully nonlinear potential periodic waves

A simple and exact numerical scheme for long-term simulations of 3D potential fully nonlinear periodic gravity waves is suggested. The scheme is based on the surface-following nonorthogonal curvilinear coordinate system. Velocity potential is represented as a sum of analytical and nonlinear components. The Poisson equation for the nonlinear component of velocity potential is solved iteratively. Fourier transform method, the second-order accuracy approximation of vertical derivatives on a stretched vertical grid and the fourth-order Runge–Kutta time stepping are used. The scheme is validated by simulation of steep Stokes waves. A one-processor version of the model for PC allows us to simulate evolution of a wave field with thousands degrees of freedom for hundreds of wave periods. The scheme is designed for investigation of nonlinear 2D surface waves, generation of extreme waves, and direct calculations of nonlinear interactions.     

Hydrological and geochemical control of metals and arsenic in a Mediterranean river contaminated by acid mine drainage (the Amous River,France); preliminary assessment of impacts on fish (Leuciscus cephalus)

Dissolved and particulate concentrations of metals (Fe, Al, Mn, Co, Ni, Cu, Zn, Cd, Tl, Pb) and As were monitored over a 5 year period in the Amous River downstream of its confluence with a creek severely affected by acid mine drainage (AMD) originating from a former Pb–Zn mine. Water pH ranged from 6.5 to 8.8. Metals were predominantly in dissolved form, except Fe and Pb, which were in particulate form. In the particulate phase, metals were generally associated with Al oxides, whereas As was linked to Fe oxides. Metal concentrations in the dissolved and/or particulate phase were generally higher during the wet season due to higher generation of AMD. Average dissolved (size < 0.22 μm) metal concentrations (μg/L) were 1 ± 4 (Fe), 69 ± 49 (Al), 140 ± 118 (Mn), 4 ± 3 Co, 6 ± 4 (Ni), 1.3 ± 0.8 (Cu), 126 ± 81 (Zn), 1.1 ± 0.7 (Cd), 0.9 ± 0.5 (Tl), 2 ± 3 (Pb). Dissolved As concentrations ranged from 5 to 134 μg/L (30 ± 23 μg/L). During the survey, the concentration of colloidal metals (5 kDa < size < 0.22 μm) was less than 25% of dissolved concentrations. Dissolved metal concentrations were generally higher than the maximum concentrations allowed in European surface waters for priority substances (Ni, Cd and Pb) and higher than the environmental quality standards for other compounds. Using Diffusion Gradient in Thin Film (DGT) probes, metals were shown to be in potentially bioavailable form. The concentrations in Leuciscus cephalus were below the maximum Pb and Cd concentrations allowed in fish muscle for human consumption by the European Water Directive. Amongst the elements studied, only As, Pb and Tl were shown to bioaccumulate in liver tissue (As, Pb) or otoliths (Tl). Bioaccumulation of metals or As was not detected in muscle.     

A petrological and geochemical study on time-series samples from Klyuchevskoy volcano,Kamchatka arc

To understand the generation and evolution of mafic magmas from Klyuchevskoy volcano in the Kamchatka arc, which is one of the most active arc volcanoes on Earth, a petrological and geochemical study was carried out on time-series samples from the volcano. The eruptive products show significant variations in their whole-rock compositions (52.0–55.5 wt.% SiO₂), and they have been divided into high-Mg basalts and high-Al andesites. In the high-Mg basalts, lower-K and higher-K primitive samples (>9 wt.% MgO) are present, and their petrological features indicate that they may represent primary or near-primary magmas. Slab-derived fluids that induced generation of the lower-K basaltic magmas were less enriched in melt component than those associated with the higher-K basaltic magmas, and the fluids are likely to have been released from the subducting slab at shallower levels for the lower-K basaltic magmas than for higher-K basaltic magmas. Analyses using multicomponent thermodynamics indicates that the lower-K primary magma was generated by ~13% melting of a source mantle with ~0.7 wt.% H₂O at 1245–1260?°C and ~1.9 GPa. During most of the evolution of the volcano, the lower-K basaltic magmas were dominant; the higher-K primitive magma first appeared in AD 1932. In AD 1937–1938, both the lower-K and higher-K primitive magmas erupted, which implies that the two types of primary magmas were present simultaneously and independently beneath the volcano. The higher-K basaltic magmas evolved progressively into high-Al andesite magmas in a magma chamber in the middle crust from AD 1932 to ~AD 1960. Since then, relatively primitive magma has been injected continuously into the magma chamber, which has resulted in the systematic increase of the MgO contents of erupted materials with ages from ~AD 1960 to present.     

Experimental Investigation of Reinforced Soil Slopes in a Geotechnical Centrifuge,with the Use of Optical Fibre Sensors

The purpose of this experimental investigation is to obtain strain measurements via optical fibre sensors in the drum geotechnical centrifuge of ETH Zurich. It is part of a test series with main goal to study the behaviour of reinforced slopes subjected to self weight loading and subsequently to an impact from a rockfall event. In total 13 scaled reinforced slope models were built with a height of 180 mm and a slope inclination of 2V:1H, optimising the materials used and the different ways of model making. The maximum g-levels were 50 and 100 g and the impact loading was applied at 50 g. The optical fibre sensors were placed on various layers of the reinforcement and at different positions. Strain measurements that were recorded during different tests are logical and expected, demonstrating that optical fibre sensors can successfully be used for measuring linear strain on reinforcement layers that are tested under enhanced gravity in the geotechnical centrifuge. The experimental set up as well as the opportunities and challenges of these measurements are presented and discussed. Finally, correspondent prototype numerical models were created and analysed and the results of this analysis are compared to the corresponding experimental ones.     

Correlations between fatty acid composition of seston and zooplankton and effects of environmental parameters in a eutrophic Siberian reservoir

During two sampling seasons we analyzed on weekly basis fatty acid (FA) composition of seston fraction <130 μm and zooplankton fraction >130 μm, and compared them using a multivariate canonical correlation analysis (CCA). Besides, we evaluated a possible impact of water temperature and inorganic nutrients on FA composition of the seston and the zooplankton.In spite of significant differences in percentages of several individual FAs, we found very strong canonical correlation (cross-correlation, 1-week lag) between FA composition of the seston and the zooplankton. The most important factor, providing the overall canonical cross-correlation between FA profiles of the seston and the zooplankton fractions was eicosapentaenoic acid (20:5ω3, EPA). FA composition of the zooplankton fraction had comparatively poor correlations with taxonomic composition of the zooplankton. Thus, seasonal variations of FA composition of the zooplankton were determined primarily by seasonal changes in FA composition of the seston, rather than by taxonomic differences of FA profiles between rotifers, cyclopoids and cladocerans. FA composition of the seston was strongly affected by its taxonomic composition, namely by that of phytoplankton. According to CCA, the highest factor loadings pertained to diatoms interacting with their marker acids, including EPA, and cyanobacteria and greens, interacting with their marker acids. Ciliates and small rotifers composed considerable and sometimes major part of the seston biomass, but according to CCA their contributions to seasonal variations of the total FA profile of the seston were insignificant. This finding indirectly support the conclusion of the other authors, that the main source of FAs presented in ciliates and rotifers must be sought in algae and that they do not modify FA composition of food consumed, apart from repackaging it.Water temperature was the principal environmental parameter which drove the overall variations of FA composition. Factor loadings for the inorganic nutrients were comparatively negligible. The main contribution in the seasonal variation of FA composition of the seston was given by negative interaction between water temperature and percentage of EPA in the seston.