Transformation textures,mechanisms of formation of high‐pressure minerals in shock melt veins of L6 chondrites,and pressure‐temperature conditions of the shock events

Abstract— The high‐pressure polymorphs of olivine, pyroxene, and plagioclase in or adjacent to shock melt veins (SMVs) in two L6 chondrites (Sahara 98222 and Yamato 74445) were investigated to clarify the related transformation mechanisms and to estimate the pressure‐temperature conditions of the shock events. Wadsleyite and jadeite were identified in Sahara 98222. Wadsleyite, ringwoodite, majorite, akimotoite, jadeite, and lingunite (NaAlSi₃O₈‐hollandite) were identified in Yamato 74445. Wadsleyite nucleated along the grain boundaries and fractures of original olivine. The nucleation and growth of ringwoodite occurred along the grain boundaries of original olivine, and as intracrystalline ringwoodite lamellae within original olivine. The nucleation and growth of majorite took place along the grain boundaries or fractures in original enstatite. Jadeite‐containing assemblages have complicated textures containing “particle‐like,” “stringer‐like,” and “polycrystalline‐like” phases. Coexistence of lingunite and jadeite‐containing assemblages shows a vein‐like texture. We discuss these transformation mechanisms based on our textural observations and chemical composition analyses. The shock pressure and temperature conditions in the SMVs of these meteorites were also estimated based on the mineral assemblages in the SMVs and in comparison with static high‐pressure experimental results as follows: 13–16 GPa, >1900 °C for Sahara 98222 and 17–24 GPa, >2100 °C for Yamato 74445.     

Numerical Simulation of Accretion Discs in Close Binary Systems andDiscovery of Spiral Shocks

The history of hydrodynamic numerical simulations for accretion disks in close binary systems is reviewed, in which emphasis is placed, in particular, on the facts that spiral shock waves were numerically found in 1986 by researchers including one of the present authors and that spiral structure was discovered in IP Pegasi in 1997 by Steeghs et al. The results of our two and three-dimensional numerical simulations in recent years are then summarized, with comparison being made with observations. This revised version was published online in July 2006 with corrections to the Cover Date.     

Petrographic study of the Miocene Mizunami Group,Central Japan: Detection of unrecognized volcanic activity in the Setouchi Province

A petrographic study of sandstones from the Miocene Mizunami Group in Central Japan has been performed on core samples from a single borehole, in order to evaluate the provenance of the sedimentary rock. Evaluation of the provenance is based on bulk mineral, heavy mineral and plagioclase contents and on whole rock chemical compositions. The sandstones studied are divisible into three types; the first type is characterized by the occurrence of biotite and plagioclase ranging from albite to oligoclase, the second type is characterized by the dominance of amphibole and labradorite with pyroxene (clinopyroxene > orthopyroxene), and the third type is characterized by the dominance of pyroxene (orthopyroxene > clinopyroxene) and andesine with lesser labradorite, bytownite and anorthite. The first type is interpreted to be derived from the basement granite, whereas the others were derived mostly from volcanic ash, judging from their mineral compositions. The volcanic activity that supplied the volcanic ash to the Mizunami Basin occurred in two phases, distinguishable by variations in their mineralogical and geochemical compositions, an indication of change in character of the volcanic activity. This petrographic study of the sandstones in the Mizunami Group suggests that unrecognized volcanic activity occurred around the Mizunami Basin, even though potential provenance of the volcanic ash has not yet been identified.     

Melting of iron–silicon alloy up to the core–mantle boundary pressure: implications to the thermal structure of the Earth’s core

The melting temperature of Fe–18 wt% Si alloy was determined up to 119 GPa based on a change of laser heating efficiency and the texture of the recovered samples in the laser-heated diamond anvil cell experiments. We have also investigated the subsolidus phase relations of Fe–18 wt% Si alloy by the in-situ X-ray diffraction method and confirmed that the bcc phase is stable at least up to 57 GPa and high temperature. The melting curve of the alloy was fitted by the Simon’s equation, P(GPa)/a = (T _m(K)/T ₀) ^c , with parameters, T ₀ = 1,473 K, a = 3.5 ± 1.1 GPa, and c = 4.5 ± 0.4. The melting temperature of bcc Fe–18 wt% Si alloy is comparable with that of pure iron in the pressure range of this work. The melting temperature of Fe–18 wt% Si alloy is estimated to be 3,300–3,500 K at 135 GPa, and 4,000–4,200 K at around 330 GPa, which may provide the lower bound of the temperatures at the core–mantle boundary and the inner core–outer core boundary if the light element in the core is silicon.     

A Study Of The Atmospheric Boundary Layer Using Radon And Air Pollutants As Tracers

Concentrations of radon ²²²Rn andair pollutants, meteorological parametersnear the surface and vertical profiles of meteorological elements were measured atUchio (Okayama City, Okayama Prefecture, Japan) 12 km north from the coast ofthe Inland Sea of Japan. In the nighttime, the ²²²Rn concentration increased in the case of weak winds, but did not increase as much in the case of moderate or strong winds, as had been expected. In the daytime, the ²²²Rn concentrationheld at a slightly higher than average level for the period from sunrise to about 1100 JST. It is considered that this phenomenon is due to a period of morning calm, that is, a transition period from land breeze to sea breeze.NO, which is sensitive to traffic volume,brought information concerning advection.Oxidant concentrations,which reflect the availability of sunlight,acted in the reverse manner to ²²²Rnconcentrations. Thus, a set of ²²²Rn and air pollutants could provide useful information regarding the local conditions of the atmospheric boundary layer.     

Hydrostatic compression of ilmenite phase of ZnSiO3 and MgGeO3

Accurate measurements of cell parameters were performed on the ilmenite phases of ZnSiO₃ and MgGeO₃ using an X-ray diffraction method under hydrostatic conditions. The linear changes in cell parameter are represented by 1?a/a ₀=(1.06±0.04)×10^?4 P(kbar) and 1?c/c ₀=(2.11±0.04)×10^?4 P for ZnSiO₃, and 1?a/a ₀=(1.37±0.03)×10^?4 P and 1?c/c ₀=(2.05±0.04)×10^?4 P for MgGeO₃. A least-squares calculation using the first-order Birch-Murnaghan equation gives K _T =2.16±0.02 Mbar and K _T =1.87±0.02 Mbar for ZnSiO₃ and MgGeO₃, respectively. Elastic systematics assuming K _T V _m =constant give a predicted value K _T =2.14 Mbar for the ilmenite phase of MgSiO₃.     

Sedimentation rates in Funka Bay,HokkaidÔ

Undisturbed sediment cores were collected by a modified gravity corer from Funka Bay. The sedimentation rate is determined by both²¹⁰Pb and pumice chronological methods. The sedimentation rates by²¹⁰Pb method are concordant with those by pumice methods. The derived rate varies from 0.06 to 0.22 g cm^–2 y^–1, and an average is 0.09 g cm^–2 y^–1.     

Sedimentation rate and heavy metal pollution in sediments in Harima Nada (Harima Sound), Seto Inland Sea

Sedimentation rates were determined with the²¹⁰Pb technique in six sediment cores from Harima Nada (Harima Sound), Seto Inland Sea. The rate of deposition varies from 0.11 g cm^–2y^–1 in the northern part to 0.33 g cm^–2 y^–1 in the southern part of the basin. A marked increase in copper and zinc content was observed above a depth in the core corresponding to about 1900 A.D. as a result of increasing human activities. Anthropogenic input of copper and zinc decreased slightly after 1970. Natural background levels of copper and zinc in the sediment in this sound are 11–16 ppm and 100–120 ppm, respectively. The total amounts of anthropogenic copper and zinc in the sediments were estimated to be 110–180g cm^–2 and 610–1,280g cm^–2, respectively. These values constitute 40–50% of the total sedimentary input of copper and zinc in the sediments since about 1900 A.D.     

Sources of uncertainty in estimating stream solute export from headwater catchments at three sites

Uncertainty in the estimation of hydrologic export of solutes has never been fully evaluated at the scale of a small‐watershed ecosystem. We used data from the Gomadansan Experimental Forest, Japan, Hubbard Brook Experimental Forest, USA, and Coweeta Hydrologic Laboratory, USA, to evaluate many sources of uncertainty, including the precision and accuracy of measurements, selection of models, and spatial and temporal variation. Uncertainty in the analysis of stream chemistry samples was generally small but could be large in relative terms for solutes near detection limits, as is common for ammonium and phosphate in forested catchments. Instantaneous flow deviated from the theoretical curve relating height to discharge by up to 10% at Hubbard Brook, but the resulting corrections to the theoretical curve generally amounted to <0.5% of annual flows. Calibrations were limited to low flows; uncertainties at high flows were not evaluated because of the difficulties in performing calibrations during events. However, high flows likely contribute more uncertainty to annual flows because of the greater volume of water that is exported during these events. Uncertainty in catchment area was as much as 5%, based on a comparison of digital elevation maps with ground surveys. Three different interpolation methods are used at the three sites to combine periodic chemistry samples with streamflow to calculate fluxes. The three methods differed by <5% in annual export calculations for calcium, but up to 12% for nitrate exports, when applied to a stream at Hubbard Brook for 1997–2008; nitrate has higher weekly variation at this site. Natural variation was larger than most other sources of uncertainty. Specifically, coefficients of variation across streams or across years, within site, for runoff and weighted annual concentrations of calcium, magnesium, potassium, sodium, sulphate, chloride, and silicate ranged from 5 to 50% and were even higher for nitrate. Uncertainty analysis can be used to guide efforts to improve confidence in estimated stream fluxes and also to optimize design of monitoring programmes. © 2014 The Authors. Hydrological Processes published John Wiley & Sons, Ltd.