Progressive vector compression for high-accuracy vector map data

With the increase in the number of applications using digital vector maps and the development of surveying techniques, a large volume of GIS (geographic information system) vector maps having high accuracy and precision is being produced. However, to achieve their effective transmission while preserving their high positional quality, these large amounts of vector map data need to be compressed. This paper presents a compression method based on a bin space partitioning data structure, which preserves a high-level accuracy and exact precision of spatial data. To achieve this, the proposed method a priori divides a map into rectangular local regions and classifies the bits of each object in the local regions to three types of bins, defined as category bin (CB), direction bin (DB), and accuracy bin (AB). Then, it encodes objects progressively using the properties of the classified bins, such as adjacency and orientation, to obtain the optimum compression ratio. Experimental results verify that our method can encode vector map data constituting less than 20% of the original map data at a 1-cm accuracy degree and that constituting less than 9% at a 1-m accuracy degree. In addition, its compression efficiency is greater than that of previous methods, whereas its complexity is lower for close to real-time applications.     

海州—大悟地区沉积变质磷矿成矿预测与远景评价

通过对海州-大悟地区含磷地层岩性特征、地层层序、形成时代、岩相古地理环境等方面的分析研究,认为本区磷矿层位和相关成矿条件可与鄂西陡山沱期磷矿对比。大别山北部也具备一定的成磷条件。预测沭阳滥洪-华冲、霍山驼岭-金寨、广济牛头山-黄梅塔儿畈、应山-广水为4个找矿远景乐观的地区。     

Flood risk assessment using regional regression analysis

This study aimed to create a flood risk map for ungauged regions, which have limited flood damage data and other relevant data. The fact that there is a shortage of data that are critical for the establishment of a flood assessment and mitigation plan is not surprising even in developed countries like South Korea. To address this problem, the regional regression concept in statistical hydrology was introduced to the flood risk assessment field in this study, and it was framed with a series of two regression functions: flood damage and regional coefficients. As the second regression function utilizes the local socioeconomic variables, the resulting flood risk map can reflect the spatial characteristics well. The proposed methodology was applied to create flood risk maps for the three metropolitan areas in South Korea. The comparison of the proposed methodology with the existing methods revealed that only the proposed methodology can produce a statistically meaningful flood risk map based on a recent major flood in 2001.     

An iron isotope signature related to electron transfer between aqueous ferrous iron and goethite

We measured the Fe isotope fractionation during the reactions of Fe(II) with goethite in the presence and absence of a strong Fe(III) chelator (desferrioxamine mesylate, DFAM). All experiments were completed in an O₂-free glove box. The concentrations of aqueous Fe(II) ([Fe(II)_aq]) decreased below the initial total dissolved Fe concentrations ([Fe(II)_total], 2.15 mM) due to fast adsorption within 0.2 day. The concentration of adsorbed Fe(II) ([Fe(II)_ads]) was determined as the difference between [Fe(II)_aq] and the concentration of extracted Fe(II) in 0.5 M HCl ([Fe(II)_extr]) (i.e., [Fe(II)_ads] = [Fe(II)_extr] − [Fe(II)_aq]). [Fe(II)_ads] also decreased with time in experiments with and without DFAM, documenting that fast adsorption was accompanied by a second, slower reaction. Interestingly, [Fe(II)_extr] was always smaller than [Fe(II)_total], indicating that some Fe(II) was sequestered into a pool that is not HCl-extractable. The difference was attributed to Fe(II) incorporated into goethite structure (i.e., [Fe(II)_inc] = [Fe(II)_total] −[Fe(II)_extr]). More Fe(II) was incorporated in the presence of DFAM than in its absence at all time steps. Regardless of the presence of DFAM, both aqueous and extracted Fe(II) (δ^56/54Fe(II)_aq and δ^56/54Fe(II)_extr) became isotopically lighter than or similar to goethite (− 0.27‰) at day 7, implying that the isotope exchange occurred between bulk goethite and aqueous Fe. Consistently, the mass balance indicated that the incorporated Fe is isotopically heavier than extracted Fe. These observations suggested that (i) co-adsorption of Fe(II) with DFAM resulted in more pervasive electron transfer, (ii) the electron transfer from heavy Fe(II) in the adsorbed Fe(II) to light Fe(III) in goethite results in the fixation of heavy adsorbed Fe(III) on the surface and accumulation of Fe(II) within the goethite, and (iii) desorption of the reduced, light Fe from goethite does not necessarily occur at the same surface sites where adsorption occurred.     

XANES evidence for sulphur speciation in Mn-, Ni- and W-bearing silicate melts

S K-edge XANES and Mn-, W- and Ni-XANES and EXAFS spectra of silicate glasses synthesised at 1400 °C and 1 bar with compositions in the CaO-MgO-Al₂O₃-SiO₂-S plus MnO, NiO, or WO₃ systems were used to investigate sulphur speciation in silicate glasses.S K-edge spectra comprised a composite peak with an edge between 2470 and 2471.4 eV, which was attributed to S²⁻, and a peak of variable height with an edge at 2480.2-2480.8 eV, which is consistent with the presence of S⁶⁺. The latter peak was attributed to sample oxidation during sample storage. W-rich samples produced an additional lower energy peak at 2469.8 eV that is tentatively attributed to the existence of S 3p orbitals hybridised with the W 5d states.Deconvolution of the composite peak reveals that the composite peak for Mn-bearing samples fits well to a model that combines three Lorentzians at 2473.1, 2474.9 and 2476.2 eV with an arctan edge step. The composite peak for W-bearing samples fits well to the same combination plus an additional Lorentzian at 2469.8 eV. The ratio of the proportions of the signal accounted for by peaks at 2473.1 and 2476.2 eV correlates with Mn:Ca molar ratios, but not with W:Ca ratios. Spectra from Ni-bearing samples were qualitatively similar but S levels were too low to allow robust quantification of peak components. Some part of the signal accounted for by the 2473.1 eV peak was therefore taken to record the formation of Mn-S melt species, while the 2469.8 peak is interpreted to record the formation of W-S melt species. The 2474.9 and 2476.2 eV peaks were taken to be dominated by Ca-S and Mg-S interactions. However, a 1:1 relationship between peak components and specific energy transitions is not proposed. This interpretation is consistent with known features of the lower parts of the conduction band in monosulphide minerals and indicates a similarity between sulphur species in the melts and the monosulphides. S-XANES spectra cannot be reproduced by a combination of the spectra of the component element monosulphides.Mn-, W- and Ni-XANES and EXAFS for synthetic glasses without sulphide exsolution did not show any sensitivity to the presence of sulphur, which is unsurprising as S:O ratios were sufficiently low that metals would be mostly co-ordinated by O. Mn EXAFS spectra were consistent with divalent Mn in 5 co-ordinated Mn-O melt species. W spectra were consistent with tetrahedrally co-ordinated hexavalent W, most likely in scheelite-like melt species, and Ni spectra were consistent with [4] co-ordinated divalent Ni. These results indicate lower co-ordinations for both W and Ni than those inferred by some previous workers. Cation co-ordination may reflect the proportion of non-bridging oxygens, which is lower in the Ca-rich and Al-poor samples investigated here than for previous studies.     

Fines adsorption on nanoparticle-coated surface

Fluid flow through porous media is inherently associated with the detachment and migration of fine particles. The migration of fine particles and ensuing clogging is the main reason of flow rate decrease in porous media. Nanoparticle coating can be a promising method to prevent fines’ detachment and migration by changing electrical surface forces between the pore wall surface and the fine particles. In this study, the attraction and adhesion forces of the nanoparticle-coated surface are measured by atomic force microscope. The effect of the nanoparticle coating on the fines adsorption efficiency is then investigated. The results show that there is an increase in the adhesion force on the nanoparticle-coated surface and the significant improvement of the fines adsorption capacity by the nanoparticle coating. The research results are relevant to other research areas whenever migrating fines cause engineering problems.     

The role of mechanical stratigraphy in the lateral variations of thrust development along the central Alberta Foothills,Canada

Fold-thrust belts generally exhibit significant variations in structural styles such as differences in thrust geometries and frequencies in imbrication. A natural laboratory of this pattern is preserved in the central Alberta Foothills of the Canadian Rockies, where differences in thrust geometries are represented by the existence vs. non-existence of triangle zones. To seek the factors that make this difference in these regions in terms of structural geometry, stratigraphic thickness variations and mechanical stratigraphy of the sedimentary layers, structural interpretation is conducted based on admissible cross-sections and well log interpretations. In northern region, a backthrust is detached from an incompetent layer(viz.Nomad Unit of the Wapiabi Formation), which gets thinner from the Foothills to the Plains, indicating that it is developed where the shale layers are pinched out where triangle zone is developed. Backthrust is also developed in the southern region, where mechanical strengths of strata(viz. Bearpaw Formation)increase toward the foreland. In the central region, however, only forethrusts are developed along the weak continuous decollement layers(viz. Turner Valley and Brazeau formations), forming an imbricate fan without development of the triangle zone. Incompetent layers such as the top Wapiabi(Nomad),Brazeau(Bearpaw), Coalspur and Paskapoo formations are also pinched out laterally, forming fault glide horizons in different stratigraphic levels in each region. These results indicate that, along the transport direction, triangle zone is developed in relation to the stratigraphic pinch out of the Nomad Unit in the northern region, and is formed associated with the variations in strengths of the layers constituting the Bearpaw Formation in the southern region. It is notable that all the glide horizons are developed along incompetent layers. However, triangle zones are not developed in the areas of continuous stratigraphy of the Nomad Unit, which does not serve as a glide horizon in the central region. This suggests that factors such as stratigraphic thickness changes of incompetent layers and mechanical stratigraphy of the sedimentary layers play an important role in the development of lateral variations in thrust system evolution in terms of triangle zone vs. imbricate fan in the central Alberta Foothills.