New insights into the P- and S-wave velocity structure of the D" discontinuity beneath the Cocos plate

Broad-band P - and S -waves from earthquakes in South America recorded at Californian network stations are analysed to image lateral variations of the D"-discontinuity beneath the Cocos plate. We apply two array processing methods to the data set: a simplified migration method to the P -wave data set and a double-array method to both the P - and S -wave data sets, allowing us to compare results from the two methods. The double-array method images a dipping reflector at a depth range from 2650 to 2700 km in the southern part of the study area. We observe a step-like topography of 100 km to a shallower reflector at about 2600 km depth to the north, as well as evidence for a second (deeper) reflector at a depth range from 2700 to 2750 km in the north. Results from the simplified migration agree well with those from the double-array method, similarly locating a large step in reflector depth in a similar location (about 2650 km depth in the south and about 2550 km in the north) as well as the additional deeper reflector at the depth of about 2750 km in the north. Waveform modelling of the reflected waves from both methods suggests a positive velocity contrast for S waves, but a negative velocity contrast for P waves for the upper reflector in agreement with predictions from mineral physical calculations for a post-perovskite phase transition. The data also show some evidence for the existence of another deeper reflector that could indicate a double intersection of the geotherm with the post-perovskite stability field, that is, the back-transformation of post-perovskite to perovskite close to the core–mantle boundary.     

Focal mechanisms of recent earthquakes in the Southern Korean Peninsula

We evaluate the stress field in and around the southern Korean Peninsula with focal mechanism solutions, using the data collected from 71 earthquakes ( M_L = 1.9–5.2) between 1999 and 2004. For this, the hypocentres were relocated and well-constrained fault plane solutions were obtained from the data set of 1270 clear P -wave polarities and 46 SH / P amplitude ratios. The focal mechanism solutions indicate that the prevailing faulting types in South Korea are strike-slip-dominant-oblique-slip faultings with minor reverse-slip component. The maximum principal stresses (σ₁) estimated from fault-slip inversion analysis of the focal mechanism solutions show a similar orientation with E–W trend (269°–275°) and low-angle plunge (10°–25°) for all tectonic provinces in South Korea, consistent with the E–W trending maximum horizontal stress (σ_Hmax) of the Amurian microplate reported from in situ stress measurements and earthquake focal mechanisms. The directions of the intermediate (σ₂) and minimum (σ₃) principal stresses of the Gyeongsang Basin are, however, about 90 deg off from those of the other tectonic provinces on a common σ₂–σ₃ plane, suggesting a permutation of σ₂ and σ₃. Our results incorporated with those from the kinematic studies of the Quaternary faults imply that NNW- to NE-striking faults (dextral strike-slip or oblique-slip with a reverse-slip component) are highly likely to generate earthquakes in South Korea.     

Smithsonian Institution’s Global Volcanism Network

Information included in this summary is based on more detailed reports published in the Bulletin of the Global Volcanism Network, vol. 31, no. 3, March 2006 (on the Internet at ). Edited by scientists at the Smithsonian, this bulletin includes reports provided by a worldwide network of correspondents. The reports contain the names and contact information for all sources. Please note that these reports are preliminary and subject to change as events are studied in more detail. The Global Volcanism Program welcomes further reports of current volcanism, seismic unrest, monitoring data, and field observations.     

Smithsonian Institution’s Global Volcanism Network

Information included in this summary is based on more detailed reports published in the Bulletin of the Global Volcanism Network, vol. 31, no. 4, April 2006 (on the Internet at ). Edited by scientists at the Smithsonian, this bulletin includes reports provided by a worldwide network of correspondents. The reports contain the names and contact information for all sources. Please note that these reports are preliminary and subject to change as events are studied in more detail. The Global Volcanism Program welcomes further reports of current volcanism, seismic unrest, monitoring data, and field observations.     

Evaluation of density in layer compaction using SASW method

SASW test, which is non-intrusive and rapid in the field application, was used to evaluate the layer density in the roller compaction without performing the complicated inversion process. The concept of normalized shear wave velocity was introduced to minimize the effect of confinement in the density evaluation. SASW test was performed to determine the shear wave velocity of the layer, and the free–free resonant column (FF–RC) test was adopted to determine the correlation between the normalized shear wave velocity and density of the site, which is almost unique independent of confinement. Testing and data reduction procedures of both tests were briefly discussed and an evaluation procedure of the field density was proposed by effectively combining in-situ shear wave velocity determined by the SASW test with the correlation between the normalized shear wave velocity and the density determined by the FF–RC test. Finally, the feasibility of the proposed method was verified by performing a field case study at Hoengsung road construction site. Field densities determined by the proposed method matched well with those determined by sand cone tests, showing the potential of applying the proposed method in the field density evaluation.     

Location and height of intertidal bars on macrotidal ridge and runnel beaches

Previous studies devoted to the morphology and hydrodynamics of ridge and runnel beaches highlight characteristics that deviate from those initially postulated by King and Williams (Geographical Journal, 1949, vol. 113, 70–85) and King (Beaches and Coasts, 1972, Edward Arnold). Disagreements on the morphodynamics of these macrotidal beaches include the position of the ridges relative to the mean neap and spring tide levels, the variation in the height of the ridges across the intertidal profile and, most importantly, whether the ridges are formed by swash or surf zone processes. The morphological characteristics of ridge and runnel beaches from three locations with varying wave, tidal and geomorphic settings were investigated to address these disagreements. Beach profiles from each site were analysed together with water‐level data collected from neighbouring ports. It was found that the ridges occur over the entire intertidal zone. On one site (north Lincolnshire, east England), the ridges are uniformly distributed over the intertidal beach, whereas on the two other sites (Blackpool beach, northwest England, and Leffrinckoucke beach, north France) there is some indication that the ridges appear to occur at preferential locations. Most significantly, the locations of the ridge crests were found to be unrelated to the positions on the intertidal profile where the water level is stationary for the longest time. It was further found that the highest ridges generally occur just above mid‐tide level where tidal non‐stationarity is greatest. These findings argue against the hypothesis that the ridges are formed by swash processes acting at stationary tide levels. It is tentatively suggested that the ridges are the result of a combination of swash and surf zone processes acting across the intertidal zone. Elucidation of the morphodynamic roles of these two types of processes, and other processes such as strong current flows in the runnels, requires further comprehensive field measurements complemented by numerical modelling. Copyright © 2001 John Wiley & Sons, Ltd.     

Precursors to earthquakes: Seismoelectromagnetic signals

Field measurements in the past several years have documented electromagnetic signals which are attributed to precursory stress and strain changes which were followed ultimately by earthquakes. Precursory electric field changes observed in Greece on multiple dipoles have been used to issue earthquake predictions. While the source of these signals is still unknown, a sufficient number of predictions has been issued to allow some, but not all, statistical analyses to show this method is better than randomly sampling the earthquake catalog. Ongoing efforts to identify the sources of both these signals and the magnetic field variations prior to the Loma Prieta earthquake are focusing on electrokinetic coupling of fluid flow and transient electric fields. A mechanism related to local fluid flow appears to be best suited at this time of explaining the variety of purported precursors. However, much more work is needed to improve the observations and refine the models of precursor generation. Efforts to monitor magnetotelluric transfer functions at longer periods (T>10s) have been hampered by variability of the functions. The use of modern noise reduction techniques such as remote referencing should reduce this variability, but may not reduce errors to a level needed for monitoring. Monitoring of high frequency (81 kHz) seismoelectric emissions may be promising, but lack of simultaneous observations on multiple instruments hinders the utility of this technique.     

Aircraft wind measurement considering lift-induced upwash

Flow distortion is a universal consideration in the measurement of wind. Usually the distortion results from deflection of the flow by the support. Instruments mounted on airplanes, however, experience an additional deflection associated with lift, which changes rapidly and continuously during flight. In front of the airplane, this deflection appears as upwash. Characteristic upwash contamination ranges from 0.5 to 2.5 m s^-1, depending on wing loading, flight speed, and forward distance from the wing to the measurement location. On pressure-radome installations the distance from the wing is usually small and the potential for upwash contamination large. Sensors mounted at the end of long probes attached to smaller airplanes with light wing loading are less susceptible to upwash contamination. Since wing loading also depends on the local vertical wind velocity the upwash velocity is directly correlated with vertical wind velocity. Generally, empirical corrections are derived from flight tests. We develop a simple method from principles of aerodynamics which explains these corrections in terms of upwash. The applicability of our approach to moderate upwash is demonstrated with data collected from the NOAA Long-EZ research airplane. More severe upwash conditions require a more sophisticated correction beyond the scope of this paper, but basically derived from the same principles.Oak Ridge Associated Universities, assigned to NOAA/ATDD