Improved Image Pansharpening Technique using Nonsubsampled Contourlet Transform with Sparse Representation

Multispectral (MS) and panchromatic (PAN) images contains complementary information. High spatial and spectral resolution is a prerequisite for images to be useful, which can be achieved through image pansharpening. In this paper, we propose a new pansharpening technique which is a combination of nonsubsampled contourlet transform (NSCT) and sparse representation (SR), called NSCT–SR. NSCT is a shift-invariant version of the contourlet transform which combines nonsubsampled pyramid (NSP) and the directional filter banks. NSP splits input MS and PAN images into low-pass and high-pass sub-bands. Fusion of high-pass sub-bands is done using local energy information while low-pass sub-bands are fused using SR. Finally, fused low-pass and high-pass sub-bands are combined to obtain image with high spatial and high spectral resolution. We have quantitatively compared NSCT–SR with other multiresolution algorithms by calculating spatial and spectral quality parameters. It is observed that spatial quality is improved by 0.93 % (for seaside image) and 1.54 % (for urban image). While spectral quality is improved maximum up to 31.39 and 40.47 %, for respective images. NSCT–SR also compared with other state-of-art algorithms by calculating various performance parameters including quality with no reference. It is found that, overall; NSCT–SR performs better compared to algorithms considered in work.     

Proximal Remote Sensing of Herbicide and Drought Stress in Field Grown Colocasia and Sweet Potato Plants by Sunlight-Induced Chlorophyll Fluorescence Imaging

Chlorophyll fluorescence is an indicator of plant photosynthetic activity and has been used to monitor the health status of vegetation. Several studies have exploited the application of red/far-red chlorophyll fluorescence ratio in detecting the impact of various types of stresses in plants. Recently, sunlight-induced chlorophyll fluorescence imaging has been used to detect and discriminate different stages of mosaic virus infection in potted cassava plants with a multi-spectral imaging system (MSIS). In this study, the MSIS is used to investigate the impact of drought and herbicide stress in field grown crop plants. Towards this control and treatment groups of colocasia and sweet potato plants were grown in laterite soil beds and the reflectance images of these crop plants were recorded up to 14-days of treatment at the Fraunhofer lines of O₂ B at 687 nm and O₂ A at 759.5 nm and the off-lines at 684 and 757.5 nm. The recorded images were analyzed using the Fraunhofer Line Discrimination technique to extract the sunlight-induced chlorophyll fluorescence component from the reflectance images of the plant leaves. As compared to the control group, the chlorophyll fluorescence image ratio (F ₆₈₇/F ₇₆₀) in the treatment groups of both the plant varieties shows an increasing trend with increase in the extent of stress. Further, the F ₆₈₇/F ₇₆₀ ratio was found to correlate with the net photosynthetic rate (Pn) and stomatal conductance (g_s) of leaves. The correlation coefficient (R ²) for the relationship of F ₆₈₇/F ₇₆₀ ratio with Pn were found to be 0.78, 0.79 and 0.78, respectively for the control, herbicide treated and drought treated colocasia plants, while these were 0.77, 0.86 and 0.88, respectively for sweet potato plants. The results presented show the potential of proximal remote sensing and the application F ₆₈₇/F ₇₆₀ fluorescence image ratio for effective monitoring of stress-induced changes in field grown plants.     

Objects Detection in Hyperspectral Images Using Spectral Derivative

In recent years hyperspectral imaging has proved its significance in the detection and mapping of various objects of interest in a scene. Various methods for object detection in hyperspectral images have been developed with their advantages and limitations. In the present study, a methodology comprising spectral derivative (first order) and spectral information divergence has been investigated for detection of objects in hyperspectral images. The efficacy of the detection scheme has been examined over two different hyperspectral data sets of Hyperion images. Tea plants (Camellia sinensis) and Sal trees (Shorea robusta) (pure pixels) have been detected as the objects of interest in the hyperspectral images independently with reduced false pixels. The proposed methodology may in future be applied for classification of mixed pixels.     

SVLBI用于大地测量的卫星轨道及其跟踪网设计

SVLBI （space very long baseline interferometry） has some important potential applications in geodesy and geodynamics, for which one of the most difficult tasks is to precisely determine the orbit of an SVLBI satellite. This work studies several technologies that will possibly be able to determine the orbit of a space VLBI satellite. Then, according to the types and charac- teristics of the satellite and the requirements for geodetic study and the geometry of the GNSS （GPS, GALILEO） satellite to track the space VLBI satellite, the six Keplerian elements of the SVLBI satellite （TEST-SVLBI） are determined. A program is designed to analyze the coverage area of space of different altitudes by the stations of the network, with which the tracking network of TEST-SVLBI is designed. The efficiency of tracking TEST-SVLBI by the network is studied, and the results are presented.     

Change of river channel and bank erosion of the burhi dihing river (assam), assessed using remote sensing data and gis

The Burhi Dining river flows in a meandering course for about 220 km through alluvial plains of Assam including a short rocky and hilly tract in between. Sequential changes in the position of banklines of the river due to consistent bank erosion have been studied from Survey of India topographic maps of 1934 and 1972, and digital satellite data of 2001 and 2004 using GIS. Two broad kinds of changes have been observed, e.g. alteration of direction of flow due to neck cut-off and progressive gradual change of the meander bends that accounts for translational, lateral, rotational, extensional and other types of movement of the meander bends. Study of bankline shift due to the bank erosion has been carried out for the periods 1934–1972, 1972–2001, 2001–2004 and 1934–2004 at 13 segments spaced at 5′ longitude interval (average 15 km) as the river course trends nearly east to west. The amounts of the bank area lost due to erosion and gained due to sediment deposition are estimated separately. The total area eroded in both banks during 1934–1972 was more (26.796 km²) as compared to sediment deposition (19.273 km²), whereas total sediment deposition was more (34.61 km²) during 1972-2001 as compared to erosion (23.152 km²). Erosion was again more in 2001–2004 (7.568 km²) as compared to sediment deposition (2.493 km²). During the entire period (1934–2004) of study the overall erosion on the both banks was 31.169 km² and overall sediment deposition was 30.101 km². The highest annual rates of bank erosion as well as bank building of the river are 21055.47 m²/km in 2001–2004 and 9665.81 m²/km in 1972-2001, respectively. Similarly the highest average annual rates of erosion as well as sediment deposition in both banks are observed during 2001–2004 and 1972–2001, respectively. The hard rocks of the hilly tract situated in between result in development of entrenched meandering and this tract has suffered minimum bank erosion.     

The ionospheric eclipse factor method (IEFM) and its application to determining the ionospheric delay for GPS

A new method for modeling the ionospheric delay using global positioning system (GPS) data is proposed, called the ionospheric eclipse factor method (IEFM). It is based on establishing a concept referred to as the ionospheric eclipse factor (IEF) λ of the ionospheric pierce point (IPP) and the IEF’s influence factor (IFF) . The IEF can be used to make a relatively precise distinction between ionospheric daytime and nighttime, whereas the IFF is advantageous for describing the IEF’s variations with day, month, season and year, associated with seasonal variations of total electron content (TEC) of the ionosphere. By combining λ and with the local time t of IPP, the IEFM has the ability to precisely distinguish between ionospheric daytime and nighttime, as well as efficiently combine them during different seasons or months over a year at the IPP. The IEFM-based ionospheric delay estimates are validated by combining an absolute positioning mode with several ionospheric delay correction models or algorithms, using GPS data at an international Global Navigation Satellite System (GNSS) service (IGS) station (WTZR). Our results indicate that the IEFM may further improve ionospheric delay modeling using GPS data.     

Accuracy assessment of lidar-derived digital elevation models

Despite the relatively high cost of airborne lidar-derived digital elevation models (DEMs), such products are usually presented without a satisfactory associated estimate of accuracy. For the most part, DEM accuracy estimates are typically provided by comparing lidar heights against a finite sample of check point coordinates from an independent source of higher accuracy, supposing a normal distribution of the derived height differences or errors. This paper proposes a new methodology to assess the vertical accuracy of lidar DEMs using confidence intervals constructed from a finite sample of errors computed at check points. A non-parametric approach has been tested where no particular error distribution is assumed, making the proposed methodology especially applicable to non-normal error distributions of the type usually found in DEMs derived from lidar. The performance of the proposed model was experimentally validated using Monte Carlo simulation on 18 vertical error data-sets. Fifteen of these data-sets were computed from original lidar data provided by the International Society for Photogrammetry and Remote Sensing Working Group III/3, using their respective filtered reference data as ground truth. The three remaining data-sets were provided by the Natural Environment Research Council's Airborne Research and Survey Facility lidar system, together with check points acquired using high precision kinematic GPS. The results proved promising, the proposed models reproducing the statistical behaviour of vertical errors of lidar using a favourable number of check points, even in the cases of data-sets with non-normally distributed residuals. This research can therefore be considered as a potentially important step towards improving the quality control of lidar-derived DEMs.     

Spin rate estimation of sounding rockets using GPS wind-up

Carrier phase wind-up is a well-known effect that arises from the relative rotation between a transmitting and receiving antenna. In GPS measurements at L1 frequency, this effect translates into an error of 19.029 cm per full relative rotation of antennas. Since this effect is independent of the satellite elevation for pure rotation about the antenna boresight axis, it is usually absorbed by the clock estimation in navigation algorithms. Therefore, the impact of wind-up is usually neglected for applications that do not require accuracies to the cm level like RTK. However, in receiving platforms with high rotation rate, the accumulated wind-up value can be important and actually be larger than receiver noise or even ionospheric variations. Therefore, in such scenarios, the wind-up contribution can be isolated and used as a source of information to compute the spin rate of such platforms using an appropriate combination of GPS observables. This work shows some results of a coarse, yet simple, approach to monitor the rotation angle and spin-rate of spin stabilized sounding rockets flown by DLR.     

Geodetic intersection on the ellipsoid

Through each of two known points on the ellipsoid a geodesic is passing in a known azimuth. We solve the problem of intersection of the two geodesics. The solution for the latitude is obtained as a closed formula for the sphere plus a small correction, of the order of the eccentricity of the ellipsoid, which is determined by numerical integration. The solution is iterative. Once the latitude is obtained, the longitude is determined without iteration.