Campanian-Maastrichtian radiolarians from the Malokuril’skaya Formation,the Shikotan Island

The results of radiolarian analysis confirm the Campanian-Maastrichtian age of the Malokuril’skaya Formation in the Shikotan Island. The Campanian-Maastrichtian age of the formation is implied simultaneously by radiolarians and inoceramids. The studied Campanian and Campanian-Maastrichtian radiolarian assemblages include abundant specimens representing genus Prunobrachium, characteristic of which was bipolar distribution in cold-water to temperate basins. The new occurrence site of prunobrachids is established at the latitude of 43°N, the Far East of Russia.     

Planktonic foraminifers in the southern Bering Sea: Changes in composition and productivity during the Late Pleistocene-Holocene

Taxonomic composition and distribution of planktonic foraminifers are studied in section of Core GC-11 that penetrated through Upper Quaternary sediments of the Bowers Ridge western slope, the southern Bering Sea. As is shown, structure of foraminiferal assemblage and productivity have varied substantially during the last 32000 calendar years in response to changes in surface water temperatures and water mass circulation in the northern part of the Pacific, the Bering Sea included. The productivity was maximal during deglaciation epoch, being notably lower in the Holocene and minimal at the glaciation time.     

New fusulinids of the Moscovian Stage found in Iran

The described fusulinids of the Moscovian Stage are found in the Asad-Abad section of the Sanandaj-Sirjan tectonic zone of Iran. Five successive fusulinid assemblages are distinguished. Three lower of them belong to the Kashirian Substage, the other two to the Podolskian Substage. The section studied is correlated with most complete sections of the Moscovian Stage in the western Tethys. Two new species Fusulinella (Moellerites) pygmea and Putrella primaris are identified; in addition to nominative taxon, the latter includes new subspecies P. primaris compacta.     

Opacitization conditions of hornblende in Bezymyannyi volcano andesites (March 30, 1956 eruption)

The paper is devoted to the conditions under which opacite rims developed around hornblende grains in andesite of the catastrophic eruption (March 30, 1956) of Bezymyannyi volcano, Kamchatka. The opacite rims were produced by a bimetasomatic reaction between hornblende and melt with the development of the following zoning: hornblende → Px + Pl + Ti-Mag → Px + Pl → Px → melt. Biometasomatic reaction was accompanied by the active removal of CaO from the rim, addition of SiO₂, and more complicated behavior of other components. The hornblende also shows reactions of its volumetric decomposition under near-isochemical conditions. The opacite rims developed under isobaric conditions, at a pressure of approximately 6 kbar. The main reason for the instability of the hornblende was the heating of the magma chamber from 890 to 1005°C due to new hot magma portion injection. The time interval between the injection and the start of eruption was estimated from the thickness of the opacite rims and did not exceed 37 days. Hence, the March 30, 1956, eruption was not related to the volcanic activity in November of 1955 but to the injection of a fresh magma portion in February–March of 1956.     

Chemical composition,volatile components,and trace elements in melts of the Karymskii volcanic center,Kamchatka, and Golovnina volcano,Kunashir Island: Evidence from inclusions in minerals

Melt inclusions were examined in phenocrysts in basalt, andesite, dacite, and rhyodacite from the Karymskii volcanic center in Kamchatka and dacite form Golovnina volcano in Kunashir Island, Kuriles. The inclusions were examined by homogenization and by analyzing glasses in more than 80 inclusions on an electron microscope and ion microprobe. The SiO₂ concentrations in the melt inclusions in plagioclase phenocrysts from basalts from the Karymskii volcanic center vary from 47.4 to 57.1 wt %, these values for inclusions in plagioclase phenocrysts from andesites are 55.7–67.1 wt %, in plagioclase phenocrysts from the dacites and rhyodacites are 65.9–73.1 wt %, and those in quartz in the rhyodacites are 72.2–75.7 wt %. The SiO₂ concentrations in melt inclusions in quartz from dacites from Golovnina volcano range from 70.2 to 77.0 wt %. The basaltic melts are characterized by usual concentrations of major components (wt %): TiO₂ = 0.7–1.3, FeO = 6.8–11.4, MgO = 2.3–6.1, CaO = 6.7–10.8, and K₂O = 0.4–1.7; but these rocks are notably enriched in Na₂O (2.9–7.4 wt % at an average of 5.1 wt %, with the highest Na₂O concentration detected in the most basic melts: SiO₂ = 47.4–52.0 wt %. The concentrations of volatiles in the basic melts are 1.6 wt % for H₂O, 0.14 wt % for S, 0.09 wt % for Cl, and 50 ppm for F. The andesite melts are characterized by high concentrations (wt %) of FeO (6.5 on average), CaO (5.2), and Cl (0.26) at usual concentrations of Na₂O (4.5), K₂O (2.1), and S (0.07). High water concentrations were determined in the dacite and rhyodacite melts: from 0.9 to 7.3 wt % (average of 15 analyses equals 4.5 wt %). The Cl concentration in these melts is 0.15 wt %, and those of F and S are 0.06 and 0.01 wt %, respectively. Melt inclusions in quartz from the dacites of Golovnina volcano are also rich in water: they contain from 5.0 to 6.7 wt % (average 5.6 wt %). The comparison of melt compositions from the Karymskii volcanic center and previously studied melts from Bezymyannyi and Shiveluch volcanoes revealed their significant differences. The former are more basic, are enriched in Ti, Fe, Mg, Ca, Na, and P but significantly depleted in K. The melts of the Karymskii volcanic center are most probably less differentiated than the melts of Bezymyannyi and Shiveluch volcanoes. The concentrations of water and 20 trace elements were measured in the glasses of 22 melt inclusions in plagioclase and quartz from our samples. Unusually high values were obtained for Li concentrations (along with high Na concentrations) in the basaltic melts from the Karymskii volcanic center: from 118 to 1750 ppm, whereas the dacite and rhyolite melts contain 25 ppm Li on average. The rhyolite melts of Golovnina volcano are much poorer in Li: 1.4 ppm on average. The melts of the Karymskii volcanic center are characterized by relative minima at Nb and Ti and maxima at B and K, as is typical of arc magmas.     

An Attempt to Predict the Failure Time of Abandoned Mine Pillars

Summary  Left in place pillars of abandoned mines are subject to weathering (e.g action of water, bacteria) that degrades their mechanical strength and eventually leads to collapse. A simple weathering model is proposed, that is governed by two parameters: the rate of progression of weathered front and the rate of degradation of the compressive strength with time. Both plane strain and axisymmetric analyses are performed and closed form solutions of the variation with time of the bearing capacity of the pillar are given. Experimental data of the tests conducted on gypsum and anhydrite specimens attacked by water are presented. It is shown that in order to fit the experimental data a third parameter must be introduced. New closed form solutions are given and the data are used for estimating the time to failure of abandoned gypsum mines in Northern Italy. Authors’ address: Dr. Riccardo Castellanza, Research Assistant, Department of Structural Engineering, Milan University of Technology (Politecnico), Piazza Leonardo da Vinci 32, 20133 Milan, Italy     

Origins of high pH mineral waters from ultramafic rocks, Central Portugal

This paper reviews the geochemical, isotopic (²H, ¹⁸O, ¹³C, ³H and ¹⁴C) and numerical modelling approaches to evaluate possible geological sources of the high pH (11.5)/Na–Cl/Ca–OH mineral waters from the Cabeço de Vide region (Central-Portugal). Water–rock interaction studies have greatly contributed to a conceptual hydrogeological circulation model of the Cabeço de Vide mineral waters, which was corroborated by numerical modelling approaches. The local shallow groundwaters belong to the Mg–HCO₃ type, and are derived by interaction with the local serpentinized rocks. At depth, these type waters evolve into the high pH/Na–Cl/Ca–OH mineral waters of Cabeço de Vide spas, issuing from the intrusive contact between mafic/ultramafic rocks and an older carbonate sequence. The Cabeço de Vide mineral waters are supersaturated with respect to serpentine indicating that they may cause serpentinization. Magnesium silicate phases (brucite and serpentine) seem to control Mg concentrations in Cabeço de Vide mineral waters. Similar δ²H and δ¹⁸O suggest a common meteoric origin and that the Mg–HCO₃ type waters have evolved towards Cabeço de Vide mineral waters. The reaction path simulations show that the progressive evolution of the Ca–HCO₃ to Mg–HCO₃ waters can be attributed to the interaction of meteoric waters with serpentinites. The sequential dissolution at CO₂ (g) closed system conditions leads to the precipitation of calcite, magnesite, amorphous silica, chrysotile and brucite, indicating that the waters would be responsible for the serpentinization of fresh ultramafic rocks (dunites) present at depth. The apparent age of Cabeço de Vide mineral waters was determined as 2790 ± 40 a BP, on the basis of ¹⁴C and ¹³C values, which is in agreement with the ³H concentrations being below the detection limit.     

National-scale estimation of potentially harmful element ambient background concentrations in topsoil using parent material classified soil:stream–sediment relationships

Regulatory authorities require estimates of ambient background concentrations (ABCs) of potentially harmful elements (PHEs) in topsoil; such data are currently not available in many countries. High resolution soil geochemical data exist for only part of England and Wales, whilst stream sediment data cover the entire landscape. A novel methodology is presented for estimating soil equivalent ABCs for PHEs from high-resolution (HR) stream sediment geochemical data grouped by common parent materials (PM), using arsenic (As) as an example. Geometric mean (GM) values for local PM groups are used to investigate different approaches for transforming sediment to soil equivalent concentrations. Holdout validation is used to assess: (i) the optimum number of samples for calculating local GM values, and (ii) the optimum scale at which to group data when using linear regression analysis to estimate GM soil ABCs from local sediment geochemical values. Holdout validation showed that the smallest differences were generally observed when five observations were used to calculate the GM and that these should be grouped over the smallest possible area in order to encompass soils over PMs with elevated GM As concentrations. Geometric mean ABCs are estimated and mapped for As in mineral soil across all of England and Wales within delineations of PM polygons. Errors for the estimation of soil equivalent GM As ABCs based on sediment data for an independent validation set were of a similar magnitude to those from holdout validation applied to the original data suggesting the approach is robust. The estimates of soil equivalent ABCs suggest that As exceeds the regulatory threshold used in risk assessments for residential land use (20 mg kg⁻¹) across 16% of the landscape of England and Wales. The applicability of the method for cognate landscapes, and potential refinements is discussed.