Preliminary observations of solar radio sources with the Culgoora radioheliograph operating at four frequencies

The Culgoora radioheliograph has been modified for observing at 327.4 MHz, which is in addition to the three frequencies (43.25, 80, and 160 MHz) previously available. At the new frequency the array beamwidth is 56, which represents the highest resolution yet available for metre-wavelength solar mapping.At 327.4 MHz the sources of radio emission are mainly in the lowest layers of the corona. Some preliminary four-frequency observations have been made of type I storms. It is found that the source size generally decreases with increasing observing frequency. This result confirms earlier suggestions that the sources of both type I and type III emission are contained in structures whose boundaries diverge outwards in the corona.     

Microwave and hard X-Ray observations of a solar flare with a time resolution better than 100 ms

Simultaneous microwave and X-ray observations are presented for a solar flare detected on May 8, 1980 starting at 19:37 UT. The X-ray observations were made with the Hard X-Ray Burst Spectrometer on the Solar Maximum Mission and covered the energy range from 28–490 keV with a time resolution of 10 ms. The microwave observations were made with the 5 and 45 foot antennas at the Itapetinga Radio Observatory at frequencies of 7 and 22 GHz, with time resolutions of 100 ms and 1 ms, respectively. Detailed correlation analysis of the different time profiles of the event show that the major impulsive peaks in the X-ray flux preceded the corresponding microwave peaks at 22 GHz by about 240 ms. For this particular burst the 22 GHz peaks preceded the 7 GHz by about 1.5 s. Observed delays of the microwave peaks are too large for a simple electron beam model but they can be reconciled with the speeds of shock waves in a thermal model.     

Quaternary fault segmentation and interaction in the epicentral area of the 1561 earthquake (Mw = 6.4), Vallo di Diano, southern Apennines, Italy

The main structural characteristics of the Caggiano and Polla faults, exposed in the epicentral area of the 1561 earthquake (Mw = 6.4), southern Italy, have been investigated in detail to assess their spatial and temporal properties, and to evaluate their seismogenic potential. These right stepping normal faults show an overlap of about 7 km and an across strike separation of about 4 km. The geometric relationships between the Caggiano and Polla faults, but also the displacement distribution along each fault, demonstrate that they have been strongly interacting throughout the Pleistocene. Nevertheless, geological evidence of Holocene tectonic activity was mainly recognized along the Caggiano Fault (faulted late glacial deposits) and in the southernmost part of the Polla Fault (faulted deposits of probably Late Pleistocene age). This suggests that the Caggiano Fault can be considered as the most tectonically active fault in the Vallo di Diano Fault System. By calculating Coulomb stress changes, we have constrained modes of mechanical interactions between the two faults in a scenario compatible with the 1561 earthquake. This approach allows us to argue that both the Caggiano and the Polla Faults are probably linked at depth, and part of the same seismogenic structure which may be potentially responsible for composite ruptures with magnitude ≥ 6.5.     

Trace element distribution among rock-forming minerals from metamorphosed to partially molten basic igneous rocks in a contact aureole (Fuerteventura, Canaries)

Low pressure partial melting of basanitic and ankaramitic dykes gave rise to unusual, zebra-like migmatites, in the contact aureole of a layered pyroxenite–gabbro intrusion, in the root zone of an ocean island (Basal Complex, Fuerteventura, Canary Islands). These migmatites are characterised by a dense network of closely spaced, millimetre-wide leucocratic segregations. Their mineralogy consists of plagioclase (An_32–36), diopside, biotite, oxides (magnetite, ilmenite), +/− amphibole, dominated by plagioclase in the leucosome and diopside in the melanosome. The melanosome is almost completely recrystallised, with the preservation of large, relict igneous diopside phenocrysts in dyke centres. Comparison of whole-rock and mineral major- and trace-element data allowed us to assess the redistribution of elements between different mineral phases and generations during contact metamorphism and partial melting.

Dykes within and outside the thermal aureole behaved like closed chemical systems. Nevertheless, Zr, Hf, Y and REEs were internally redistributed, as deduced by comparing the trace element contents of the various diopside generations. Neocrystallised diopside – in the melanosome, leucosome and as epitaxial phenocryst rims – from the migmatite zone, are all enriched in Zr, Hf, Y and REEs compared to relict phenocrysts. This has been assigned to the liberation of trace elements on the breakdown of enriched primary minerals, kaersutite and sphene, on entering the thermal aureole. Major and trace element compositions of minerals in migmatite melanosomes and leucosomes are almost identical, pointing to a syn- or post-solidus reequilibration on the cooling of the migmatite terrain i.e. mineral–melt equilibria were reset to mineral–mineral equilibria.     

Geological structure, evolution stages, and petroliferous complexes of the Gulf of Mexico basin

The Gulf of Mexico basin occupies a vast region encompassing the southern continental margin of North America, a considerable part of the Greater Antilles, and the intervening Sigsbee Deep with the oceanic crust. In the north, the basin is contiguous with spurs of the Hercynian Appalachians, the Mississippi Interior and Permian basins. The Mississippi Fan, one of the largest in the world, governs the bottom topography and structure in the eastern Gulf of Mexico. The abyssal basin is surrounded in many areas by steep continental slopes passing in places into escarpments: Sigsbee, Campeche, and others. It is only in the Yucatan Peninsula region that the continental slope merges with a wide shelf. The Cuban-North Haiti meganticlinorium frames the basin on the Cuba Island side.     

New data on geology of the Shatak Complex (western slope of the Southern Urals)

The comprehensive study of sections of the Shatak Complex has revealed that conglomerates at the base of Middle Riphean rocks are not basal but intraformational rocks. Previously described angular unconformities between shales of the Sukhin Subformation (Yusha Formation, R₁) and conglomerates of the Kuz”elga Subformation (Mashak Formation, R₂) are related to late tectonic movements. Magmatic rocks developed at the base of the Middle Riphean section are represented by sheet intrusions formed in the course of emplacement of a fluid-saturated magmatic melt into partially or completely lithified terrigenous rocks at the graben formation stage during the origination of synkinematic faults that served as magma conduits. It is inferred that distribution of provenances of clastic materials and sedimentation basins in the Burzyanian and Yurmatian should be scrutinized in the study region, because the normal regressive sequence of rocks from the uppermost Yusha Formation to the lowermost Mashak Formation, which was established in the Shatak Ridge, eliminates a clear boundary distinguished between them at present. The idea about an older age of the Mashak conglomerates is substantiated.     

Glauconite from Paleogene volcano-terrigenous rocks in Western Kamchatka

It is shown that glauconite-bearing interbeds are widespread in the layer-by-layer studied sections on the Sea of Okhotsk coast (Mainach section) and Kheisliveem River valley (Kavran section), the volcanoterrigenous rocks of the Kovachin, Amanin, and Gakkhin formations of the Paleogene in western Kamchatka (Upper Eocene-Lower Oligocene boundary beds). Detailed mineralogical and structural-crystallochemical characteristics of glauconite from the Amanin Formation are presented. It is suggested that such glauconite should not be used for geochronological purposes.Some specific features of glauconite formation, particularly, the preservation of specific morphological forms at high accumulation rates of volcano-terrigenous rocks, are discussed. Possibility of the formation of glauconite with the active influence of bacterial metabolism is considered.     

Giant submarine landslide grooves in the Neoproterozoic/Lower Cambrian Phe Formation, northwest Himalaya: Mechanisms of formation and palaeogeographic implications

Giant groove casts have been found in the upper Proterozoic to Lower Cambrian Phe Formation (Haimanta Group), a siliciclastic sandstone/shale succession in the Tethyan Zone of the Higher Himalaya tectonic unit. The grooves are among the largest linear erosion structures related to submarine mass-movements observed in the geologic record. They are up to 4 m wide, about 0.2 m deep and can be traced for more than 35 m without changing their character. The grooves are straight, subparallel to cross-cutting striations with shallow semi-circular cross-sections and well-defined superimposed minor ridges and grooves. Groove casts exist on the soles of several sandstone beds within a 73 m thick logged section, commonly associated with flute casts. Their characteristics were compared with several other types of ancient and modern submarine linear erosion structures. A sand-rich, non-channelized basin floor depositional environment is inferred from the lithofacies, the combination of sedimentary structures, the lack of coarse-grained pebbly facies, the lateral continuity of beds, and the lack of channel structures. The grooves probably formed by laminar debris flows/concentrated density flows dragging blocks of already lithified sediment across the basin floor. When the bedding is structurally rotated back to horizontal, the groove casts show consistent North–South oriented palaeocurrent trends, with South-directed palaeocurrent directions indicated by flute casts. These palaeocurrent orientations contrast with previous palaeogeographic reconstructions of this area, which propose sediment delivery from the South. We therefore suggest a new “double provenance” model for the spatial relationship of late Proterozoic to Early Cambrian strata of the Himalaya, in which Lesser and Tethyan Himalayan age-equivalent sediment was deposited in a connected basin, where the former received detritus from the South, and the latter from a hitherto unknown source in the North. One possible candidate for this northern source is the South China Block and an associated Neoproterozoic volcanic arc.     

Structural analysis of the gravity field over the American-Antarctic Ridge

This paper discusses the structure of the American-Antarctic Ridge based on analysis of the gravity field. Analysis of the gravity field in different reductions and its transforms allowed the revelation of zonal, regional, and local specific features in the field’s structure and their correlation with contemporary notions on the tectonic zoning of the American-Antarctic Ridge and adjacent regions. The lineament structures of the field allowed locating the areas of spreading zones and principal transform and fracture zones. Comparison between the location of these structural features and the interpretation results of shipboard magnetic measurements confirmed the reliability of the received data. Results of the performed investigations presented in the form of structural schemes are a basis for constructing a model of the tectonosphere under the American-Antarctic Ridge.