Watershed delineation using hydrographic features and a DEM in plain river network region

Watershed delineation is a required step when conducting any spatially distributed hydrological modelling. Automated approaches are often proposed to delineate a watershed based on a river network extracted from the digital elevation model (DEM) using the deterministic eight‐neighbour (D8) method. However, a realistic river network cannot be derived from conventional DEM processing methods for a large flat area with a complex network of rivers, lakes, reservoirs, and polders, referred to as a plain river network region (PRNR). In this study, a new approach, which uses both hydrographic features and DEM, has been developed to address the problems of watershed delineation in PRNR. It extracts the river nodes and determines the flow directions of the river network based on a vector‐based hydrographic feature data model. The river network, lakes, reservoirs, and polders are then used to modify the flow directions of grid cells determined by D8 approach. The watershed is eventually delineated into four types of catchments including lakes, reservoirs, polders, and overland catchments based on the flow direction matrix and the location of river nodes. Multiple flow directions of grid cells are represented using a multi‐direction encoding method, and multiple outflows of catchments are also reflected in the topology of catchments. The proposed approach is applied to the western Taihu watershed in China. Comparisons between the results obtained from the D8 approach, the ‘stream burning’ approach, and those from the proposed approach clearly demonstrate an improvement of the new approach over the conventional approaches. This approach will benefit the development of distributed hydrological models in PRNR for the consideration of different types and multiple inlets and outlets of catchments. Copyright © 2015 John Wiley & Sons, Ltd.     

Paleogene of the Huanghekou Sag in the Bohai Bay Basin,NE China: deposition–erosion response to a slope break system of rift lacustrine basins

The sequence architecture and depositional systems of the Paleogene lacustrine rift succession in the Huanghekou Sag, Bohai Bay Basin, NE China were investigated based on seismic profiles, combined with well log and core data. Four second‐order or composite sequences and seven third‐order sequences were identified. The depositional systems identified in the basin include: fan delta, braid delta, meander fluvial delta, lacustrine and sublacustrine fan. Identification of the slope break was conducted combining the interpretation of faults of each sequence and the identification of syndepositional faults, based on the subdivision of sequence stratigraphy and analysis of depositional systems. Multiple geomorphologic units were recognized in the Paleogene of the Huanghekou Sag including faults, flexures, depositional slope break belts, ditch‐valleys and sub‐uplifts in the central sag. Using genetic division principles and taking into consideration tectonic features of the Paleogene of the Huanghekou Sag, the study area was divided into the Northern Steep Slope/Fault Slope Break System, the Southern Gentle Slope Break System and T10 Tectonic Slope Break System/T10 Tectonic Belt. Responses of slope break systems to deposition–erosion are shown as: (1) basin marginal slope break is the boundary of the eroded area and provenance area; (2) ditch‐valley formed by different kinds of slope break belts is a good transport bypass for source materials; (3) shape of the slope break belt of the slope break system controls sediments types; (4) the ditch‐valley and sub‐sag of a slope break system is an unloading area for sediments; and (5) due to their different origins, association characteristics and developing patterns, the Paleogene slope break belt systems in the Huanghekou Sag show different controls on depositional systems. The Northern Fault Slope Break system controls the deposition of a fan delta‐lacustrine‐subaqueous fan, the Southern Gentle Slope Break system controls the deposition of a fluvial–deltaic–shallow lacustrine and sublacustrine fan, and the T10 Tectonic Slope Break System controls the deposition of shallow lacustrine beach bar sandbodies. The existence of a slope break system is a necessary but not a sufficient condition for studying sandbody development. The formation of effective sandbodies along the slope break depends on the reasonable coupling of effective provenance, necessary association patterns of slope break belt, adequate unloading space and creation of definite accommodation space. Copyright © 2013 John Wiley & Sons, Ltd.     

Multiple overpressure systems and their relationship with hydrocarbon accumulation in the Qikou Depression of the Bohai Bay Basin,China

Pressure measurements using drill stem tests and estimates from log data calculation indicate that three vertically stacked regional pressure compartments exist in the Qikou Depression of Bohai Bay Basin, N. China. The compartments comprise hydrostatic, upper weak, and lower overpressure systems. Laterally, overpressure (pressure coefficient > 1.2) occurs in the deeper areas and weakens gradually from the centre to the margin of the depression. The accumulation of oil and gas exhibits the interesting characteristics of oil‐bearing layers above gas‐bearing layers in the Qikou Depression. The pattern can be accounted for by the evolution of overpressure system, the maturity process of the source rock and the main fault activity. In the late Dongying Formation (Ed, 30 Ma), the lower overpressure system began to form shape, and the hydrocarbon sources generated a large volume of oil. However, because there was no migration pathway, the oil only accumulated in the original strata. In the late Guantao Formation (Ng, 12 Ma), the gas was generated, the upper overpressure system formed gradually, and the activity of the main fault gradually increased. Then, the overpressure pushed the early gathered oil to flow from the lower overpressure system into the upper overpressure system. Afterwards, the activity of the main fault decreased again and remains weak until now. Thus, later generated natural gas cannot keep migrating along the main fault and can only accumulate in the lower overpressure system. Copyright © 2014 John Wiley & Sons, Ltd.     

祁连山北缘深部弧形褶皱—逆冲带及其油气勘探前景

祁连山北缘-河西走廊西段位于青藏高原东北缘,是新生代陆内构造活动最强烈地区。基于野外构造观测、横跨山前及前陆盆地区的三维地震构造分析与解释,结合地震地质属性提取分析,识别出祁连山北缘-酒泉盆地西段窟窿山-柳沟庄带隐伏的弧形褶皱-逆冲带,该弧形构造是造山带基底逆冲构造楔体垂向差异抬升与向前陆方向差异运动的产物;该弧形结构控制本区下白垩统地层裂缝发育、分布与破裂强度,并与本区先期断裂、裂缝带产生构造叠加效应,形成弧形构造“中央强裂缝发育带”,是形成构造裂缝型油气藏的有利区域。     

A microscale model for air pollutant dispersion simulation in urban areas: Presentation of the model and performance over a single building

A microscale air pollutant dispersion model system is developed for emergency response purposes. The model includes a diagnostic wind field model to simulate the wind field and a random-walk air pollutant dispersion model to simulate the pollutant concentration through consideration of the influence of urban buildings. Numerical experiments are designed to evaluate the model's performance, using CEDVAL(Compilation of Experimental Data for Validation of Microscale Dispersion Models) wind tunnel experiment data, including wind fields and air pollutant dispersion around a single building. The results show that the wind model can reproduce the vortexes triggered by urban buildings and the dispersion model simulates the pollutant concentration around buildings well. Typically, the simulation errors come from the determination of the key zones around a building or building cluster. This model has the potential for multiple applications; for example, the prediction of air pollutant dispersion and the evaluation of environmental impacts in emergency situations; urban planning scenarios;and the assessment of microscale air quality in urban areas.     

2013年济南市大气能见度与相对湿度和PM10、PM2.5的关系

对济南市2013年1—12月的能见度、相对湿度、PM10及PM2.5逐时监测数据分析,结果表明：能见度、相对湿度、PM10和PM2.5浓度有明显的月变化和日变化规律。在各项污染物中,能见度与颗粒物的相关性最高,与PM10的相关系数为-0.6718,与PM2.5的相关系数为-0.7422;在气象因子中,与相对湿度的相关性最高,相关系数为-0.6501。不同季节条件下,能见度与PM2.5的相关性明显优于PM10的,冬季能见度与颗粒物的相关性明显优于其他季节的。     

鄂西秭归盆地中三叠世-早侏罗世沉积记录及其对秦岭印支碰撞造山作用的启示

随着印支期南秦岭勉略洋盆闭合,华南和华北两大块体最终拼贴、构成中国大陆的基本轮廓。普遍认为这一洋陆转换、碰撞造山发生在三叠纪,但具体时间和空间过程仍存在较多争议。秭归盆地位于秦岭逆冲褶皱带东段南缘,是扬子北缘前陆盆地系统的重要组成,在沉积序列和碎屑来源上与秦岭印支期造山作用密切相关。该盆地经历早中三叠世滨-浅海相到晚三叠世-早侏罗世三角洲-河流相的沉积转变,中三叠统巴东组和上三叠统九里岗组之间发育平行不整合。不整合面之上的上三叠统-下侏罗统砂岩在碎屑组分上不仅含有泥岩、粉砂岩等沉积岩岩屑和千枚岩、板岩和片岩等中-低级变质岩岩屑,而且还见有中酸性火山岩岩屑。结合碎屑锆石颗粒U-Pb定年和古流向数据,这些火山岩岩屑揭示北部的秦岭造山带源区在晚三叠世(225~200Ma)存在火山活动,与同期的花岗质侵入岩一起反映秦岭印支期的同碰撞造山岩浆活动。