The transition from peraluminous to peralkaline granitic melts: Evidence from melt inclusions and accessory minerals

Fractional crystallization of peraluminous F- and H₂O-rich granite magmas progressively enriches the remaining melt with volatiles. We show that, at saturation, the melt may separate into two immiscible conjugate melt fractions, one of the fractions shows increasing peraluminosity and the other increasing peralkalinity. These melt fractions also fractionate the incompatible elements to significantly different degrees. Coexisting melt fractions have differing chemical and physical properties and, due to their high density and viscosity contrasts, they will tend to separate readily from each other. Once separated, each melt fraction evolves independently in response to changing T/P/X conditions and further immiscibility events may occur, each generating its own conjugate pair of melt fractions. The strongly peralkaline melt fractions in particular are very reactive and commonly react until equilibrium is attained. Consequently, the peralkaline melt fraction is commonly preserved only in the isolated melt and mineral inclusions.

We demonstrate that the differences between melt fractions that can be seen most clearly in differing melt inclusion compositions are also visible in the composition of the resulting ore-forming and accessory minerals, and are visible on scales from a few micrometers to hundreds of meters.     

A reassessment of models for hydrocarbon generation in the Khibiny nepheline syenite complex, Kola Peninsula, Russia

Although hydrocarbon-bearing fluids have been known from the alkaline igneous rocks of the Khibiny intrusion for many years, their origin remains enigmatic. A recently proposed model of post-magmatic hydrocarbon (HC) generation through Fischer-Tropsch (FT) type reactions suggests the hydration of Fe-bearing phases and release of H₂ which reacts with magmatically derived CO₂ to form CH₄ and higher HCs. However, new petrographic, microthermometric, laser Raman, bulk gas and isotope data are presented and discussed in the context of previously published work in order to reassess models of HC generation. The gas phase is dominated by CH₄ with only minor proportions of higher hydrocarbons. No remnants of the proposed primary CO₂-rich fluid are found in the complex. The majority of the fluid inclusions are of secondary nature and trapped in healed microfractures. This indicates a high fluid flux after magma crystallisation. Entrapment conditions for fluid inclusions are 450–550 °C at 2.8–4.5 kbar. These temperatures are too high for hydrocarbon gas generation through the FT reaction. Chemical analyses of rims of Fe-rich phases suggest that they are not the result of alteration but instead represent changes in magma composition during crystallisation. Furthermore, there is no clear relationship between the presence of Fe-rich minerals and the abundance of fluid inclusion planes (FIPs) as reported elsewhere. δ¹³C values for methane range from − 22.4‰ to − 5.4‰, confirming a largely abiogenic origin for the gas. The presence of primary CH₄-dominated fluid inclusions and melt inclusions, which contain a methane-rich gas phase, indicates a magmatic origin of the HCs. An increase in methane content, together with a decrease in δ¹³C isotope values towards the intrusion margin suggests that magmatically derived abiogenic hydrocarbons may have mixed with biogenic hydrocarbons derived from the surrounding country rocks.     

Preservation/exhumation of ultrahigh-pressure subduction complexes

Ultrahigh-pressure (UHP) metamorphic terranes reflect subduction of continental crust to depths of 90–140 km in Phanerozoic contractional orogens. Rocks are intensely overprinted by lower pressure mineral assemblages; traces of relict UHP phases are preserved only under kinetically inhibiting circumstances. Most UHP complexes present in the upper crust are thin, imbricate sheets consisting chiefly of felsic units ± serpentinites; dense mafic and peridotitic rocks make up less than  10% of each exhumed subduction complex. Roundtrip prograde–retrograde P–T paths are completed in 10–20 Myr, and rates of ascent to mid-crustal levels approximate descent velocities. Late-stage domical uplifts typify many UHP complexes.

Sialic crust may be deeply subducted, reflecting profound underflow of an oceanic plate prior to collisional suturing. Exhumation involves decompression through the P–T stability fields of lower pressure metamorphic facies. Scattered UHP relics are retained in strong, refractory, watertight host minerals (e.g., zircon, pyroxene, garnet) typified by low rates of intracrystalline diffusion. Isolation of such inclusions from the recrystallizing rock matrix impedes back reaction. Thin-aspect ratio, ductile-deformed nappes are formed in the subduction zone; heat is conducted away from UHP complexes as they rise along the subduction channel. The low aggregate density of continental crust is much less than that of the mantle it displaces during underflow; its rapid ascent to mid-crustal levels is driven by buoyancy. Return to shallow levels does not require removal of the overlying mantle wedge. Late-stage underplating, structural contraction, tectonic aneurysms and/or plate shallowing convey mid-crustal UHP décollements surfaceward in domical uplifts where they are exposed by erosion. Unless these situations are mutually satisfied, UHP complexes are completely transformed to low-pressure assemblages, obliterating all evidence of profound subduction.     

Distribution of cadmium, chromium, copper, lead and zinc in marine sediments in Hong Kong waters

Partitioning of heavy metals (Cd, Cr, Cu, Pb, Zn) in marine sediments collected from various sites in Hong Kong waters were determined using sequential extraction method. Sediments from Kellette Bank, located in Victoria Harbour, had higher metal concentrations especially Cu and Zn than most other sites. Slightly over 20% of total Cu and Cr existed as readily available forms in Peng Chau and Kellette Bank. At most sampling sites, over 15% of the Cu existed as the exchangeable form indicating that Cu could be readily released into the aqueous phase from sediments. A significantly higher percentage of Pb and Zn was associated with the three non-residual fractions. Hence, there is a greater environmental concern for remobilization of Pb and Zn compared with Cr. The high amount of residual Cd (>50%) and the relatively lower Cd content indicate that little environmental concern is warranted for the remobilization of Cd. Distribution of metals in sediments collected from different depth at Kellette Bank shows that metal concentrations decreased with profile depth. The levels of Pb and Zn associated with the two readily available fractions increased sharply in the surface sediment. These metals represented the pollutants, which were introduced into the area in the mid-eighties through early nineties as a result of rapid economic and industrial development in the territory. As significant portions of these metals were bound to the readily available phases in the surface sediments, metal remobilization could be a concern. An erratum to this article can be found at     

Relations between climatic variability and hydrologic time series from four alluvial basins across the southwestern United States

Hydrologic time series of groundwater levels, streamflow, precipitation, and tree-ring indices from four alluvial basins in the southwestern United States were spectrally analyzed, and then frequency components were reconstructed to isolate variability due to climatic variations on four time scales. Reconstructed components (RCs), from each time series, were compared to climatic indices like the Pacific Decadal Oscillation (PDO), North American Monsoon (NAM), and El Niño-Southern Oscillation (ENSO), to reveal that as much as 80% of RC variation can be correlated with climate variations on corresponding time scales. In most cases, the hydrologic RCs lag behind the climate indices by 1–36 months. In all four basins, PDO-like components were the largest contributors to cyclic hydrologic variability. Generally, California time series have more variation associated with PDO and ENSO than the Arizona series, and Arizona basins have more variation associated with NAM. ENSO cycles were present in all four basins but were the largest relative contributors in southeastern Arizona. Groundwater levels show a wide range of climate responses that can be correlated from well to well in the various basins, with climate responses found in unconfined and confined aquifers from pumping centers to mountain fronts.     

Assessment of Marine Clay Improvement Under Reclamation Fills by in-situ Testing Methods

In ground improvement projects with prefabricated vertical drains, the duration of the preloading period is set in advance based on the predetermined time rate of consolidation of the compressible layer. If prediction is accurately done, the required degree of consolidation is met at the pre-determined preloading time. As such, there is a requirement for in-situ tests to be carried out just prior to the removal of surcharge to assess the degree of consolidation of the improved ground. In-situ tests were carried out after 23 months of surcharge loading at the In-Situ Test Site within the Changi East Reclamation Project in the Republic of Singapore. In-situ testing works in this research study comprises the use of field vane shear, piezocone, flat dilatometer and self-boring pressuremeter. The in-situ tests were carried out to determine the shear strength and degree of consolidation of the Singapore marine clay at Changi after 23 months of surcharge loading. The In-Situ Test Site consisted of a Vertical Drain Area as well as an untreated Control Area. Both areas were located adjacent to each other and were surcharged simultaneously to the same level and surcharge left in place for a period of 23 months. Comparison was made between the in-situ test results of the Vertical Drain Area and the untreated Control Area.     

Experiments on silicate melt immiscibility in the system Fe2SiO4–KAlSi3O8–SiO2–CaO–MgO–TiO2–P2O5 and implications for natural magmas

The effect of CaO and MgO, with or without TiO₂ and P₂O₅, on the two-melt field in the simplified system Fe₂SiO₄–KAlSi₃O₈–SiO₂ has been experimentally determined at 1,050°–1,240°C, 400 MPa. Despite the suppressing effect of MgO, CaO, and pressure on silicate melt immiscibility, our experiments show that this process is still viable at mid-crustal pressures when small amounts (0.6–2.0 wt%) of P₂O₅ and TiO₂ are present. Our data stress that the major element partition coefficients between the two melts are highly correlated with the degree of polymerisation (nbo/t) of the SiO₂-rich melt, whatever temperature, pressure, or exact composition. Experimental immiscible melt compositions in natural systems at 0.1 MPa from the literature (lunar and tholeiitic basalts) plot on similar but distinct curves compared to the simplified system. These relations between melt polymerisation and partition coefficients, which hold for a large range of compositions and fO₂, are extended to various volcanic and plutonic rocks. This analysis strengthens the proposal that silicate melt immiscibility can be important in volcanic rocks of various compositions (from tholeiitic basalts to lamprophyres). However, the majority of proposed immiscible compositions in plutonic rocks are at least not coexisting melts, but may have suffered accumulation of early crystallized minerals.     

P–T evolution and reaction textures in retrogressed eclogites from Svetlik, the Moldanubian Zone (Czech Republic)

Summary Lenses and pods of mafic rocks from the Monotonous Unit near Svetlik are characterized by eclogite facies mineral assemblages; however some inclusion patterns (oriented quartz rods in clinopyroxene and cuboids of disordered graphite in garnet) that are usually known from ultra-high pressure rocks were also observed in one sample. Conventional thermobarometry yielded maximum P–T conditions of 2.0–2.5 GPa and 750 °C. Decompression and heating at amphibolite and granulite facies conditions resulted in the formation of at least five distinct types of symplectites. These include symplectitic intergrowth of ilmenite and clinopyroxene after titanite, described here for the first time from the Moldanubian Zone. In addition, symplectites of plagioclase and biotite with accessory amounts of spinel after tabular pseudomorphs (after phengite?) are also reported here. Mass balance relations indicate that symplectites of diopside + plagioclase after omphacite and plagioclase + spinel (sapphirine) after kyanite + garnet, formed by nearly isochemical reactions. All other symplectite-forming reactions were allochemical and were accelerated by the presence of fluid in the primary phases. Preserved zoning pattern in garnet with high compositional gradient in some samples suggests that the rocks were affected briefly by granulite facies overprint.     

A heuristic model for potential geomorphic influences on trophic interactions in streams

Whereas certain linkages between stream channel morphology and stream ecology are fairly well-understood, how geomorphology influences trophic interactions remains largely unknown. As a first step, a simple, heuristic model is developed that couples reach-scale geomorphic morphology with trophic dynamics between vegetation, detritus, herbivores, and predators. Predation is assumed to increase with depth beyond a threshold depth, and herbivory is assumed to decrease with velocity beyond a threshold velocity. Results show that the modeled food chain is sensitive to channel geometry, particularly around the threshold conditions for predators and herbivores. Importantly, geomorphic influences are not isolated to a particular trophic level, but rather are transferred through the food chain via top-down and bottom-up effects. The modeled system is particularly sensitive to changes in the end-members of the food chain: vegetation and predators. Results illustrate that geomorphic disturbances, known to affect a single trophic level (e.g., fish), likely impact multiple trophic levels in the stream ecosystem via trophic interactions. Such impacts at the multiple trophic level are poorly understood. While limited by the lack of empirical long-term data for testing and calibration, this simple model provides a structure for generating hypotheses, collecting targeted data, and assessing the potential impacts of stream disturbance or restoration on entire stream ecosystems. Further, the model illustrates the potential for future coupled stream models to explore spatial and temporal linkages.